基于改进型直流真空断路器弧后暂态仿真及介质恢复特性分析

doi:10.19595/j.cnki.1000-6753.tces.191731

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (3845 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract For DC vacuum circuit breakers used in high current and high di/dt breaking environments, the post-arc transient process with insulation recovery as the main feature directly affects their breaking characteristics. During the development of the sheath, the electric field strength and power density of the cathode surface after the end of arcing are the two factors that cause arc reignition. From the perspective of improving the recovery capability of the medium after the arcing, different test schemes were carried out at the peak arc current of about 23kA and the rate of the arc-extinguishing current of about 300A/μs. Moreover, based on continuous transitional sheath modeling, the variables such as contact opening dynamic process and the effective diameter of the arc are introduced. The design of commutation circuit parameters is guided based on the improved arc model. Finally, the equivalent analysis of PSCAD/EMTDC electromagnetic transient simulation and test is carried out. It is shown that the arc re-ignition trend of the vacuum circuit breaker after the arcing in the test is consistent with the simulation results, and the type of re-strike can be determined through the simulation results. Therefore, the improved post-arc electromagnetic transient modeling of vacuum circuit breaker is verified.

Key words： Breaking characteristics post-arc electric field strength power density dielectric recovery arc re-ignition

Received: 11 December 2019

PACS:

TM561.2

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Li Bo
	Bao Yongquan
	Peng Zhendong
	Yang Chenguang
	Sha Xinle

Cite this article:

Li Bo,Bao Yongquan,Peng Zhendong等. Post-Arc Transient Simulation and Dielectric Recovery Analysis Based on Improved DC Vacuum Circuit Breaker[J]. Transactions of China Electrotechnical Society, 2021, 36(8): 1752-1760.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.191731 OR https://dgjsxb.ces-transaction.com/EN/Y2021/V36/I8/1752

[1] 张超, 刘路辉, 徐国顺, 等. 新型直流真空断路器强迫换流分断特性[J]. 高压电器, 2017, 53(3): 141-146.
Zhang Chao, Liu Luhui, Xu Guoshun, et al.Forced commutation breaking characteristics of a new DC vacuum circuit breaker[J]. High Voltage Apparatus, 2017, 53(3): 141-146.
[2] 杨锋, 高海林, 江壮贤, 等. 双向强迫换流型直流限流断路器的分析与设计[J]. 中国电机工程学报, 2017, 37(9): 2701-2707.
Yang Feng, Gao Hailin, Jiang Zhuangxian, et al.Analysis and design of a bidirectional forced commutation DC current limiting circuit breaker[J]. Proceedings of the CSEE, 37(9): 2701-2707.
[3] 郑晓铭, 王钢, 李海锋. 新型组合式直流断路器拓扑及其性能分析[J]. 电力系统自动化, 2018, 42(24): 105-112.
Zheng Xiaoming, Wang Gang, Li Haifeng.New topology and performance analysis of assembly DC circuit breaker[J]. Automation of Electric Power Systems, 2018, 42(24): 105-112.
[4] 于海, 迟颂, 李尔平. 基于全控型电力电子器件的强制换流型混合直流断路器[J]. 电力系统自动化, 2017, 41(12): 168-172, 187.
Yu Hai, Chi Song, Li Erping.Hybrid DC circuit breaker with forced current commutation based on full-controllable power electronic devices[J]. Auto- mation of Electric Power Systems, 2017, 41(12): 168-172, 187.
[5] 高阳, 贺之渊, 王成昊, 等. 一种新型混合式直流断路器[J]. 电网技术, 2016, 40(5): 1320-1325.
Gao Yang, He Zhiyuan, Wang Chenghao, et al.A new hybrid circuit breaker for DC-application[J]. Power System Technology, 2016, 40(5): 1320-1325.
[6] 盛晔, 陈晓东, 张国明. 10kV真空断路器弧后延时重击穿过电压及其对电容器绝缘影响的研究[J]. 高电压技术, 1993, 19(3): 26-31.
Sheng Ye, Chen Xiaodong, Zhang Guoming.Effect of overvoltage by NSDD oninsulatio of capacitor in 10kV vacuum circuit breakers[J]. High Voltage Engineering, 1993, 19(3): 26-31.
[7] 邹积岩, 刘晓明, 于德恩. 基于智能模块的高压直流真空断路器研究[J]. 电工技术学报, 2015, 30(13): 47-55.
Zou Jiyan, Liu Xiaoming, Yu Deen.Investigations on the HVDC vacuum circuit breaker based on intelligent models[J]. Transactions of China Electrotechnical Society, 2015, 30(13): 47-55.
[8] 刘晓明, 于德恩, 邹积岩. 基于连续过渡模型的直流真空断路器弧后介质恢复分析[J]. 真空科学与技术学报, 2014, 34(12): 1285-1289.
Liu Xiaoming, Yu Deen, Zou Jiyan.Simulation of post-arc dielectric recovery characteristics of DC vacuum vircuit breaker[J]. Chinese Journal of Vacuum Science and Technology, 2014, 34(12): 1285-1289.
[9] 程显, 杨培远, 葛国伟, 等. 基于真空与SF₆气体串联间隙的新型高压直流断路器介质恢复特性[J]. 高电压技术, 2019, 45(8): 2393-2402.
Cheng Xian, Yang Peiyuan, Ge Guowei, et al.Dielectric recovery characteristics of serial vacuum and SF₆ gaps in novel HVDC circuit breakers[J]. High Voltage Engineering, 2019, 45(8): 2393-2402.
[10] 娄宝磊, 舒胜文, 刘畅. 真空断路器弧后仿真模型及参数优化方法研究[J]. 高压电器, 2017, 53(5): 103-108, 115.
Lou Baolei, Shu Shengwen, Liu Chang.Research on post-arc simulation model and parameter optimizing method of vacuum circuit breaker[J]. High Voltage Apparatus, 2017, 53(5): 103-108, 115.
[11] 舒胜文, 阮江军, 黄道春, 等. 系统故障参数对真空断路器开断性能影响的建模与仿真研究[J]. 电力自动化设备, 2013, 33(11): 81-87.
Shu Shengwen, Ruan Jiangjun, Huang Daochun, et al.Influence of system fault parameters on breaking performance of vacuum circuit breaker modeling and simulation[J]. Electric Power Automation Equipment, 2013, 33(11): 81-87.
[12] 刘晓明, 于德恩, 邹积岩, 等. 基于弧后鞘层发展分析的直流真空断路器换流参数优化[J]. 真空科学与技术学报, 2015, 35(9): 1082-1087.
Liu Xiaoming, Yu Deen, Zou Jiyan, et al.Optimi- zation design of commutation circuit of DC vacuum circuit breaker[J]. Chinese Journal of Vacuum Science and Technology, 2015, 35(9): 1082-1087.
[13] 王枫, 王仲奕, 郝萌萌, 等. 真空断路器开断小电感电流下多次复燃现象的介质恢复过程分析[J]. 高电压技术, 2018, 44(6): 2019-2026.
Wang Feng, Wang Zhongyi, Hao Mengmeng, et al.Dielectric recovery process of multiple re-ignition phenomena after small inductive current interruption in vacuum[J]. High Voltage Engineering, 2018, 44(6): 2019-2026.
[14] 舒胜文, 阮江军, 黄道春. 真空断路器瞬态恢复电压与弧后电流相互作用仿真研究[J]. 高电压技术, 2014, 40(1): 309-316.
Shu Shengwen, Ruan Jiangjun, Huang Daochun.Interaction between the transient recovery voltage and post arc current in vacuum circuit breaker[J]. High Voltage Engineering, 2014, 40(1): 309-316.
[15] 朱世明. 大电流真空电弧弧后介质恢复研究[D]. 武汉: 华中科技大学, 2012.
[16] Lins G.Measurement of the neutral copper vapor density around current zero of a 500A vacuum arc using laser-induced fluorescence[J]. IEEE Transa- ction on Plasma Science, 13(6): 577-581.
[17] Rene G, Ekkehard S, Max C.Numerical simulation of residual charge of vacuum interruoters[J]. IEEE Transaction on Plasma Science, 2001, 29(5): 754-758.
[18] 王季梅. 真空开关理论及其应用[M]. 西安: 西安交通大学出版社, 1986.
[19] 王建华, 耿英三, 刘志远. 输电等级单断口真空断路器理论及其技术[M]. 北京: 机械工业出版社, 2016.
[20] 李博, 彭振东, 沙新乐, 等. 直流真空断路器强迫换流分断的可靠性[J]. 高电压技术, 2019, 45(8): 2486-2494.
Li Bo, Peng Zhendong, Sha Xinle, et al.Reliablity of force commutation breaking by DC vacuum circuit breaker[J]. High Voltage Engineering, 2019, 45(8): 2486-2494.
[21] 葛国伟, 程显, 王华清, 等. 低压混合式直流断路器中真空电弧电流转移判据[J]. 电工技术学报, 2019, 34(19): 4038-4047.
Ge Guowei, Cheng Xian, Wang Huaqing, et al.Investigation on the vacuum arc current commutation criteria of the low voltage DC hybrid circuit breaker[J]. Transactions of China Electrotechnical Society, 2019, 34(19): 4038-4047.
[22] 赵书涛, 王波, 华回春, 等. 基于马尔科夫模型的直流断路器可靠性评估方法[J]. 电工技术学报, 2019, 34(增刊1): 126-132.
Zhao Shutao, Wang Bo, Hua Huichun, et al.Reliability evaluation method of DC circuit breaker based on Markov model[J]. Transactions of China Electrotechnical Society, 2019, 34(S1): 126-132.
[23] 张国军, 宋飞凡, 李绍明, 等. 三阶段电流转移混合型无弧直流断路器[J]. 电工技术学报, 2017, 32(11): 87-95.
Zhang Guojun, Song Feifan, Li Shaoming, et al.Hybrid arc-less DC circuit breaker based on three stage current commutation[J]. Transactions of China Electrotechnical Society, 2017, 32(11): 87-95.
[24] 程显, 杨培远, 葛国伟, 等. 基于电流转移的CO₂气体断路器动态介质恢复特性[J]. 电工技术学报, 2019, 34(23): 5030-5038.
Cheng Xian, Yang Peiyuan, Ge Guowei, et al.Dynamic dielectric recovery characteristics of CO₂ gas circuit breaker based on current commutation[J]. Transactions of China Electrotechnical Society, 2019, 34(23): 5030-5038.