电机外置式径向型高温超导飞轮储能系统样机悬浮测试及旋转实验

doi:10.19595/j.cnki.1000-6753.tces.L80255

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (61075 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract A small-capacity radial-type superconducting flywheel energy storage system (SFESS) prototype with an external motor was built for the levitation and rotation experiments. The structure of the prototype and its main components are introduced in detail. Through the potting process and the bonding process, two superconducting magnet stators (SMSs) were set up and tested respectively for levitation. Based on the established FEM mathematical model, the magnetic field distribution of the high-temperature superconducting (HTS) bearing as well as the current density in the HTS bulks during the running of the prototype was studied. The prototype was equipped with the SMS fabricated by the bonding process, and then the free rotations and radial vibration of the rotor at different steady-state speeds were measured. The variation law of the rotor radial variation amplitude was studied by the two-norm method. It is shown that the rotational characteristics are related to the rotor vibration. Below the resonant frequency, the vibration increases significantly with the increase of speed. Limiting rotor vibration amplitude by combined bearing system is an effective approach to improve system speed and mechanical stability.

Key words： High-temperature superconducting superconducting flywheel energy storage system FEM mathematical model electromagnetic distribution rotational characteristics

Received: 29 June 2018 Published: 29 May 2019

PACS:	TM153
	TM26+2
	TM506

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yu Zhiqiang
	Sun Xiaoyun
	Qiu Qingquan
	Liu Yuzhi
	Wen Cheng

Cite this article:

Yu Zhiqiang,Sun Xiaoyun,Qiu Qingquan等. Levitation Test and Rotation Experiment of Radial-Type Superconducting Flywheel Energy Storage System Prototype with External Motor[J]. Transactions of China Electrotechnical Society, 2019, 34(10): 2166-2175.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L80255 OR https://dgjsxb.ces-transaction.com/EN/Y2019/V34/I10/2166

[1] Han H S, Kim D S.Superconducting magnet[M]. Magnetic Levitation: Springer Netherlands, 2016.
[2] Faraji F, Majazi A, Al-Haddad K.A comprehensive review of flywheel energy storage system tech- nology[J]. Renewable and Sustainable Energy Reviews, 2017, 67: 477-490.
[3] Strasik M, Hull J R, Mittleider J A, et al.An overview of Boeing flywheel energy storage systems with high-temperature superconducting bearings[J]. Superconductor Science and Technology, 2010, 23(3): 034021.
[4] Werfel F N, Floegel-Delor U, Rothfeld R, et al.Superconductor bearings, flywheels and trans- portation[J]. Superconductor Science and Technology, 2011, 25(1): 014007.
[5] Mukoyama S, Nakao K, Sakamoto H, et al.Development of superconducting magnetic bearing for 300kW flywheel energy storage system[J]. IEEE Transactions on Applied Superconductivity, 2017, 27(4): 1-4.
[6] Ma Guangtong, Liu Huifen, Wang Jiasu, et al.3D modeling permanent magnet guideway for high temperature superconducting maglev vehicle appli- cation[J]. Journal of Superconductivity and Novel Magnetism, 2009, 22(8): 841-847.
[7] 余志强, 张国民, 邱清泉, 等. 高温超导飞轮储能系统的发展现状[J]. 电工技术学报, 2013, 28(12): 109-118.
Yu Zhiqiang, Zhang Guomin, Qiu Qingquan, et al.Development status of magnetic levitation flywheel energy storage system based on high-temperature superconductor[J]. Transactions of China Electro- technical Society, 2013, 28(12): 109-118.
[8] 朱吉然, 李龙桂, 李欣然, 等. 基于网络状态评估的配电网络多目标优化重构方法[J]. 电力系统保护与控制, 2017, 45(1): 98-103.
Zhu Jiran, Li Longgui, Li Xinran, et al.Distribution network multi-objective reconfiguration optimization based on status assessment[J]. Power System Protection and Control, 2017, 45(1): 98-103.
[9] 李东东, 徐连连, 刘翔, 等. 考虑可削减负荷参与的含风光储微网经济优化调度[J]. 电力系统保护与控制, 2017, 45(2): 35-41.
Li Dongdong, Xu Lianlian, Liu Xiang, et al.Optimal dispatching of microgrid considering the partici- pation of reducible loads, distributed generators (DG) and energy storage units[J]. Power System Protection and Control, 2017, 45(2): 35-41.
[10] 赵卓立, 杨苹, 郑成立, 等. 微电网动态稳定性研究述评[J]. 电工技术学报, 2017, 32(10): 111-122.
Zhao Zhuoli, Yang Ping, Zheng Chengli, et al.Review on dynamic stability research of microgrid[J]. Transactions of China Electrotechnical Society, 2017, 32(10): 111-122.
[11] 杨捷, 金新民, 吴学智, 等. 直流微网中混合储能系统的无互联通信网络功率分配策略[J]. 电工技术学报, 2017, 32(10): 135-144.
Yang Jie, Jin Xinmin, Wu Xuezhi, et al.A wireless power sharing control strategy for hybrid energy storage systems in DC microgrids[J]. Transactions of China Electrotechnical Society, 2017, 32(10): 135-144.
[12] 颜宁, 厉伟, 邢作霞, 等. 复合储能在主动配电网中的容量配置[J]. 电工技术学报, 2017, 32(19): 180-186.
Yan Ning, Li Wei, Xing Zuoxia, et al.Capacity allocation method in active distribution network based on hybrid energy storage[J]. Transactions of China Electrotechnical Society, 2017, 32(19): 180-186.
[13] 刘志博, 刘兴杰. 独立直流微网中混合储能系统的改进多滞环控制策略[J]. 电工技术学报, 2018, 33(3): 490-497.
Liu Zhibo, Liu Xingjie.Improved multi-hysteresis control strategy of hybrid storage system in a stand-alone DC microgrid[J]. Transactions of China Electrotechnical Society, 2018, 33(3): 490-497.
[14] 肖湘宁, 廖坤玉, 唐松浩, 等. 配电网电力电子化的发展和超高次谐波新问题[J]. 电工技术学报, 2018, 33(4): 707-720.
Xiao Xiangning, Liao Kunyu, Tang Songhao, et al.Development of power-electronized distribution grids and the new supraharmonics issues[J]. Transactions of China Electrotechnical Society, 2018, 33(4): 707-720.
[15] Koshizuka N.R&D of superconducting bearing technologies for flywheel energy storage systems[J]. Physica C: Superconductivity and Its Applications, 2006, 445: 1103-1108.
[16] Han Y H, Park B J, Jung S Y, et al.The improved damping of superconductor bearings for 35kWh superconductor flywheel energy storage system[J]. Physica C: Superconductivity, 2013, 485: 102-106.
[17] Arsénio A J, Cardeira C, Melício R, et al.Experimental setup and efficiency evaluation of zero-field-cooled (ZFC) YBCO magnetic bearings[J]. IEEE Transactions on Applied Superconductivity, 2017, 27(4): 1-5.
[18] Hekmati A, Hekmati R, Siamaki M.Proposed design for superconducting magnetic bearing system with high-temperature superconducting discs[J]. IEEE Transactions on Applied Superconductivity, 2017, 27(8): 1-8.
[19] Naseh M, Heydari H.Sensitivity analysis of rotor parameters in axially magnetized radial HTS magnetic bearings using an analytical method[J]. IEEE Transactions on Applied Superconductivity, 2016, 26(8): 1-11.
[20] Sotelo G G, Rodriguez E, Costa F S, et al.Tests with a hybrid bearing for a flywheel energy storage system[J]. Superconductor Science and Technology, 2016, 29(9): 095016.
[21] Basaran S, Sivrioglu S.Radial stiffness improvement of a flywheel system using multi-surface super- conducting levitation[J]. Superconductor Science and Technology, 2017, 30(3): 035008.
[22] Fang J R, Lin L Z, Yan L G, et al.A new flywheel energy storage system using hybrid superconducting magnetic bearings[J]. IEEE Transactions on Applied Superconductivity, 2001, 11(1): 1657-1660.
[23] Yu Zhiqiang, Zhang Guomin, Qiu Qingquan, et al.Analyses and tests of HTS bearing for flywheel energy system[J]. IEEE Transactions on Applied Superconductivity, 2014, 24(3): 5700405.
[24] Yu Zhiqiang, Zhang Guomin, Qiu Qingquan, et al.Analysis of levitation characteristics of a radial-type high-temperature superconducting bearing based on numerical simulation[J]. IEEE Transactions on Applied Superconductivity, 2015, 25(3): 3600605.
[25] Li Wanjie, Zhang Guomin, Ai Liwang, et al.A three- dimensional measurement system for high-temperature super-conducting magnetic bearings[J]. IEEE Transa- ctions on Applied Superconductivity, 2018, 28(4): 9001505.
[26] Ai Liwang, Zhang Guomin, Li Wanjie, et al.Research on a super-conducting magnetic bearing system for submerged cryogenic disk motor-pump[J]. IEEE Transactions on Applied Superconductivity, 2018, DOI: 10.1109/TASC.2018.2791799.
[27] 余志强, 张国民, 邱清泉, 等. 基于3D有限元法的圆柱形永磁体与高温超导体悬浮特性的数字仿真[J]. 电工技术学报, 2015, 30(13): 32-38.
Yu Zhiqiang, Zhang Guomin, Qiu Qingquan, et al.Numerical simulation of levitation characteristics between a cylindrical permanent magnet and a high- temperature superconductor based on 3D finite- element method[J]. Transactions of China Electro- technical Society, 2015, 30(13): 32-38.
[28] Sotelo G G, de Andrade R, Ferreira A C. Test and simulation of superconducting magnetic bearings[J]. IEEE Transactions on Applied Superconductivity, 2009, 19(3): 2083-2086.
[29] Ma Guangtong, Lin Qunxu, Jiang Donghui, et al.Numerical studies of axial and radial magnetic forces between high temperature superconductors and a magnetic rotor[J]. Journal of Low Temperature Physics, 2013, 172(3-4): 299-309.
[30] Zhang Min, Coombs T A.3D modeling of high-TC superconductors by finite element software[J]. Superconductor Science and Technology, 2011, 25(1): 015009.