The Topologies and Control of Hybrid-Clamped Four-Level and Five-Level Inverters
Wang Kui, Zheng Zedong, Xu Lie, Li Yongdong
State Key Lab of Control and Simulation of Power System and Generation Equipments Department of Electrical Engineering Tsinghua University Beijing 100084 China
Abstract A novel hybrid-clamped four-level inverter topology and its derived five-level topology are presented in this paper. The proposed topologies can improve the voltage levels, reduce the number of devices in the diode-clamped and flying capacitor multilevel converters, and avoid the series connection of switches in the five-level active-neutral-point-clamped converter. To achieve the voltage balancing of DC-link capacitors and flying capacitors, a modified PWM method is proposed. This PWM method can regulate the central DC-link capacitor and flying capacitor voltages by adjusting the duty cycles of PWM signals slightly. The upper and lower DC-link capacitor voltages are balanced by zero-sequence voltage injection. An experimental prototype is built up, and the experimental results verify this topology.
Wang Kui,Zheng Zedong,Xu Lie等. The Topologies and Control of Hybrid-Clamped Four-Level and Five-Level Inverters[J]. Transactions of China Electrotechnical Society, 2018, 33(2): 353-360.
[1] Rodriguez J, Lai J, Peng F. Multilevel inverters: a survey of topologies, controls, and applications[J]. IEEE Transactions on Industrial Electronics, 2002, 49(4): 724-738. [2] Rodriguez J, Franquelo L G, Kouro S, et al. Multilevel converters: an enabling technology for high-power applications[J]. Proceedings of the IEEE, 2009, 97(11): 1786-1817. [3] Abu-Rub H, Holtz J, Rodriguez J, et al. Medium- voltage multilevel converters—state of the art, challenges, and requirements in industrial applications[J]. IEEE Transactions on Industrial Electronics, 2010, 57(8): 2581-2596. [4] Peng F, Qian W, Cao D. Recent advances in multilevel converter/inverter topologies and appli- cations[C]//International Power Electronics Conference (IPEC), Sapporo, Japan, 2010: 492-501. [5] Rodriguez J, Bernet S, Steimer P, et al. A survey on neutral-point-clamped inverters[J]. IEEE Transa- ctions on Industrial Electronics, 2010, 57(7): 2219- 2230. [6] 王琛琛, 管勃. 一种兼顾二极管钳位型三电平变换器中点电位平衡的窄脉冲处理方法[J]. 电工技术学报, 2015, 30(19): 136-143. Wang Chenchen, Guan Bo. A narrow pulse pro- cessing method considering neutral-point potential balance problem of diode-clamped three-level inverters[J]. Transactions of China Electrotechnical Society, 2015, 30(19): 136-143. [7] Fazel S, Bernet S, Krug D, et al. Design and comparison of 4kV neutral-point-clamped, flying- capacitor, and series-connected H-bridge multilevel converters[J]. IEEE Transactions on Industrial Applications, 2007, 43(4): 1032-1040. [8] Chen A, He X. Research on hybrid-clamped multilevel-inverter topologies[J]. IEEE Transactions on Industrial Electronics, 2006, 53(6): 1898-1907. [9] Ruiz-Caballero D, Ramos-Astudillo R, Mussa S, et al. Heldwein, symmetrical hybrid multilevel DC-AC converters with reduced number of insulated DC supplies[J]. IEEE Transactions on Industrial Elec- tronics, 2010, 57(7): 2307-2314. [10] 郑泽东, 顾春阳, 李永东, 等. 采用多绕组高频变压器的新型多电平变换器拓扑及控制策略[J]. 电工技术学报, 2014, 29(10): 12-18. Zheng Zedong, Gu Chunyang, Li Yongdong, et al. Topology and control method of a novel multi-level converter with multi-winding high frequency trans- former[J]. Transactions of China Electrotechnical Society, 2014, 29(10): 12-18. [11] 王琛琛, 李永东. 多电平变换器拓扑关系及新型拓扑[J]. 电工技术学报, 2011, 26(1): 92-99. Wang Chenchen, Li Yongdong. Multilevel converter topologies and two novel topologies[J]. Transactions of China Electrotechnical Society, 2011, 26(1): 92-99. [12] Barbosa P, Steimer P, Steinke J, et al. Active neutral- point-clamped multilevel converters[C]//IEEE 36th Power Electronics Specialists Conference, Recife, Brazil, 2005: 2296-2301. [13] Bruckner T, Bernet S, Guldner H. The active NPC converter and its loss-balancing control[J]. IEEE Transactions on Industrial Electronics, 2005, 52(3): 855-868.
2018, Vol. 33 
