基于门极阻容补偿网络的IGBT串联均压方法

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (790 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on the detailed analysis of turning-off process of IGBT and the summarization of a series of key equivalent circuits and equations, a voltage-balancing method for series-connected IGBTs was put forward to solve voltage inequality. This method adopted a resistor-capacitor circuit on gate electrode. A mathematical formula was derived that can describe the influence of dynamic voltage unbalance and turning-off time inequality on series-connected IGBTs. The selection principle of the network parameters was also analyzed. A semi-physical model of IGBT based on Lumped Charge method was established, which was used to verify the IGBT gate resistance-capacity compensation network. The parameters of the compensation network under the actual test conditions were given. The test system of the series-connected IGBTs was established, and then the experimental verification was carried out under various voltage and current conditions. The results show that the proposed method can effectively control the deference between the turning-off delay time and the increasing speed of the turning-off voltage. That is, the dynamic peak voltage unbalance reduced from 14.4% to 6.3% under the condition of 2 000V/1 500A.

Key words： Series-connected IGBT gate resistor-capacitor circuit switching characteristics turn-off characteristics

Received: 05 July 2015 Published: 01 March 2017

PACS:

TM46

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Mei Guifang
	An Yu
	Zhang Jian

Cite this article:

Mei Guifang,An Yu,Zhang Jian. Voltage Balancing Method of Series-Connected IGBT Based on Resistor-Capacitor Circuit on Gate Side[J]. Transactions of China Electrotechnical Society, 2017, 32(4): 35-47.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I4/35

[1] 辛卫东, 汪东杰, 鞠文杰, 等. 大功率IGBT串联电压失衡机理及均压方法[J]. 电气应用, 2014, 33(19): 68-72.
Xin Weidong, Wang Dongjie, Ju Wenjie, et al. Voltage-unbalancing mechanism and voltage-sharing of high-power series connected IGBTs[J]. Electro- technical Application, 2014, 33(19): 68-72.
[2] 张春朋, 张树卿, 赵国亮, 等. 串联IGBT动态均压方法综述[J]. 电工技术学报, 2013, 28(增1): 197- 202.
Zhang Chunpeng, Zhang Shuqing, Zhao Guoliang, et al. Review of dynamic voltage balancing methods for series-connected IGBTs[J]. Transactions of China Electrotechnical Society, 2013, 28(S1): 197-202.
[3] 梁昊. IGBT串联模块化的研究[D]. 杭州: 浙江大学, 2012.
[4] Sasagawa K, Abe Y, Matsus E K. Voltage balancing method for IGBTs connected in series[J]. IEEE Transactions on Industry Applications, 2004, 40(4): l025-1030.
[5] 宁大龙, 同向前, 李侠, 等. IGBT串联器件门极RCD有源均压电路[J]. 电工技术学报, 2013, 28(2): 192-198.
Ning Dalong, Tong Xiangqian, Li Xia, et al. Design of RCD active gate control circuit for series connected IGBTs[J]. Transactions of China Electro- technical Society, 2013, 28(2): 192-198.
[6] Soonwook H, Chitta V, Torrey D A. Series con- nection of IGBT’s with active voltage balancing[C]// Thirty-Second IAS Annual Meeting Record of the Industry Applications Conference, New Orleans, LA, 1997: 961-967.
[7] Consoli A, Musumeci S, Oriti G, et al. Active voltage balancement of series connected IGBTs[C]//Con- ference Record of the 30th IAS Annual Meeting, Orlando, FL, 1995: 2752-2758.
[8] Palmer P R, Santi E, Hudgins J L, et al. Circuit simulator models for the diode and IGBT with full temperature dependent features[J]. IEEE Trans- actions on Power Electronics, 2003, 18(5): 1220- 1229.
[9] 同向前, 宁大龙, 夏伟, 等. IGBT串联的一种复合均压方法[J]. 电工技术学报, 2012, 27(3): 153- 158.
Tong Xiangqian, Ning Dalong, Xia Wei, et al. Design of RCD active gate control circuit for series con- nected IGBTs[J]. Transactions of China Electro- technical Society, 2012, 27(3): 153-158.
[10] Withanage R, Shammas N. Series connection of insulated gate bipolar transistors[C]//Proceedings of European Power Electronics and Applications Conference, Dresden, 2005: 10-19.
[11] 孟进, 马伟明, 张磊, 等. 基于IGBT开关暂态过程建模的功率变流器电磁干扰频谱估计[J]. 中国电机工程学报, 2005, 25(20): 16-20.
Meng Jin, Ma Weiming, Zhang Lei, et al. EMI evaluation of power converters considering IGBT switching transient modeling[J]. Proceedings of the CSEE, 2005, 25(20): 16-20.
[12] 庞辉, 温家良, 贺之渊, 等. 大功率IGBT串联电压不平衡机制研究[J]. 中国电机工程学报, 2011, 31(21): 1-8.
Pang Hui, Wen Jialiang, He Zhiyuan, et al. Unba- lancing voltage of high power series connected IGBT valve[J]. Proceedings of the CSEE, 2011, 31(21): 1-8.
[13] Grobovic P J. An IGBT gate driver for feed-forward control of turn-on losses and reverse recovery current[J]. IEEE Transactions on Power Electronic, 2008, 23(2): 643-652.
[14] Palmer P R. Active voltage control of IGBTs for high power applications[J]. IEEE Transactions on Power Electronics, 2004, 19(4): 894-901.
[15] Lauritzen P O, Andersen G K, Helsper M. A basic IGBT model with easy parameter extraction[C]//Pro- ceedings of the IEEE Power Electronics Specialists Conference, Vancouver, BC, Canada, 2001, 4: 2160- 2165.
[16] Ma C L, Lauritzen P O, Sigg J. Modeling of power diodes with the lumped-charge modeling technique[J]. IEEE Transactions on Power Electronics, 1997, 12(3): 398-405.
[17] http://www.ee.washington.edu/research/pemodels/.
[18] Nawaz M, Chimento F, Mora N, et al. Simple spice based modeling platform for 4.5kV power IGBT modules[C]//IEEE Energy Conversion Congress and Exposition, Denver, United States, 2013: 279-286.
[19] http://new.abb.com/semiconductors/insulated-gate- bipolar-transistor-(IGBT)-and-diode-modules/stakpak.