偏心条件下轴向磁通轮毂电机不平衡弯矩建模与分析

doi:10.19595/j.cnki.1000-6753.tces.160732

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (29283 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to analyze the impact of static and dynamic eccentricity, a quasi-3D analytical model of air-gap magnetic field was firstly built for an axial-flux in-wheel motor (AFWM) without eccentricity, and the slotting effect and fringing effect was taken into account through complex relative air-gap permeance and correction function respectively. Then the analytical model under eccentric condition was gained by means of considering the variation of air gap length, and finite element (FE) analysis results indicate that the model can predict air gap flux density precisely at arbitrary position of the AFWM with both static and dynamic eccentricity. Finally, the effects of eccentricity on magnetic field and electromagnetic force were analyzed via the established model and the method to calculate bending moment was proposed. The results reveal that apart from unbalanced magnetic pull, eccentricity in AFWM will produce extra bending moment, which is quite different from radial-flux motor. The bending moment may cause eccentric degree further deterioration.

Key words： Axial-flux in-wheel motor static eccentricity dynamic eccentricity analytical model bending moment

Received: 22 May 2016 Published: 19 July 2017

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Deng Wenzhe
	Zuo Shuguang
	Lin Fu
	Wu Shuanglong
	Mao Yu

Cite this article:

Deng Wenzhe,Zuo Shuguang,Lin Fu等. Modeling and Analysis of Unbalanced Moment for an Axial-Flux in-Wheel Motor with Eccentricity[J]. Transactions of China Electrotechnical Society, 2017, 32(13): 153-161.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.160732 OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I13/153

[1] Rahman K M, Patel N R, Ward T G, et al. Application of direct-drive wheel motor for fuel cell electric and hybrid electric vehicle propulsion system[J]. IEEE Transactions on Industry Applications, 2006, 42(5): 1185-1192.
[2] Giulii C F, De Donato G, Caricchi F. Recent advances in axial-flux permanent-magnet machine technology[J]. IEEE Transactions on Industry Appli- cations, 2012, 48(6): 2190-2205.
[3] 黄允凯, 周涛, 董剑宁, 等. 轴向永磁电机及其研究发展综述[J]. 中国电机工程学报, 2015, 35(1): 192-205.
Huang Yunkai, Zhou Tao, Dong Jianning, et al. An overview on developments and researches of axial flux permanent magnet machines[J]. Proceedings of the CSEE, 2015, 35(1): 192-205.
[4] Kahourzade S, Mahmoudi A, Ping H W, et al. A comprehensive review of axial-flux permanent- magnet machines[J]. Canadian Journal of Electrical & Computer Engineering, 2014, 37(1): 19-33.
[5] 左曙光, 张国辉, 吴旭东, 等. 倾斜偏心下轮毂永磁同步电机电磁力分析[J]. 浙江大学学报: 工学版, 2015, 49(5): 901-907.
Zuo Shuguang, Zhang Guohui, Wu Xudong, et al. Analysis of electromagnetic force in wheel-drive PMSM with stator incline eccentricity[J]. Journal of Zhejiang University (Engineering Science), 2015, 49(5): 901-907.
[6] 鲍晓华, 吕强, 王汉丰. 基于齿部磁场分析的大型潜水电机气隙偏心故障研究[J]. 电工技术学报, 2016, 31(8): 90-95.
Bao Xiaohua, Lü Qiang, Wang Hanfeng. Study on air-gap eccentricity fault in large submersible motors with tooth magnetic field analysis[J]. Transactions of China Electrotechnical Society, 2016, 31(8): 90-95.
[7] Kim D J, Kim H J, Hong J P, et al. Estimation of acoustic noise and vibration in an induction machine considering rotor eccentricity[J]. IEEE Transactions on Magnetics, 2014, 50(50): 857-860.
[8] 鲍晓华, 李福英, 方勇, 等. 大型潜水电机混合偏心时转子副临界振动的研究[J]. 电工技术学报, 2015, 30(6): 142-149.
Bao Xiaohua, Li Fuying, Fang Yong, et al. Sub-critical speed vibration of rotors for large submersible motors with mixed eccentricity[J]. Transactions of China Electrotechnical Society, 2015, 30(6): 142-149.
[9] 周晓燕, 章跃进, 李琛, 等. 计及定子开槽的插入式永磁电机转子偏心空载气隙磁场全局解析迭代模型[J]. 电工技术学报, 2014, 29(7): 66-76.
Zhou Xiaoyan, Zhang Yuejin, Li Chen, et al. Open- circuit magnetic field calculation for insert permanent magnet motors with rotor eccentricity based on analytical-iteration method[J]. Transactions of China Electrotechnical Society, 2014, 29(7): 66-76.
[10] Marignetti F, Vahedi A, Mirimani S M. An analytical approach to eccentricity in axial flux permanent magnet synchronous generators for wind turbines[J]. Electric Power Components and Systems, 2015, 43(8-10): 1039-1050.
[11] Mirimani S M, Vahedi A, Marignetti F. Effect of inclined static eccentricity fault in single stator-single rotor axial flux permanent magnet machines[J]. IEEE Transactions on Magnetics, 2012, 48(1): 143-149.
[12] Mirimani S M, Vahedi A, Marignetti F, et al. Static eccentricity fault detection in single-stator-single- rotor axial-flux permanent-magnet machines[J]. IEEE Transactions on Industry Applications, 2012, 48(6): 1838-1845.
[13] Mirimani S M, Vahedi A, Marignetti F, et al. An online method for static eccentricity fault detection in axial flux machines[J]. IEEE Transactions on Industrial Electronics, 2015, 62(3): 1931-1942.
[14] Zhu Z Q, Howe D. Instantaneous magnetic field distribution in brushless permanent magnet DC motors, part 3: effect of stator slotting[J]. IEEE Transactions on Magnetics, 1993, 29(1): 143-151.
[15] Zarko D, Ban D, Lipo T A. Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent-magnet motor using complex relative air-gap permeance[J]. IEEE Transactions on Magnetics, 2006, 42(7): 1828-1837.
[16] Choi J Y, Lee S H, Ko K J, et al. Improved analytical model for electromagnetic analysis of axial flux machines with double-sided permanent magnet rotor and coreless stator windings[J]. IEEE Transactions on Magnetics, 2011, 47(10): 2760-2763.