The Design for Electromagnetic Interference Eliminating Circuits in Electromagnetic Ultrasonic Testing Systems
Liu Suzhen1,Li Libin1,Cai Zhichao1,Zhang Chuang1,Yang Qingxin1,2
1.Province-Ministry Joint Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability Hebei University of Technology Tianjin 300130 China 2.Key Laboratory of Advanced Electrical Engineering and Energy Technology Tianjin Polytechnic University Tianjin 300387 China
Abstract As a type of industrial non-contact detection method,electromagnetic acoustic transducer (EMAT) has a broad application prospect in harsh industrial conditions.However,the pulse electromagnetic interference (EMI),mainly the common-mode noise,produced by its emission circuit will affect the detection circuit and then generate false detection.Aiming at this problem,the hardware circuit is designed to eliminate the EMI.The composite instrumentation amplifier with the characteristics of high speed,high common mode rejection ratio,high input impedance,and low noise is designed.The high-speed circuit utilizes the low noise dual channel ADA4817-2 as the input gain amplifier and uses a high common mode rejection AD8429 instrument op-amp in the following stage,which improves the noise suppression capability.Through analyzing the test results in the harsh industrial conditions,the common-mode noise is effectively eliminated by the proposed circuit.
Liu Suzhen,Li Libin,Cai Zhichao等. The Design for Electromagnetic Interference Eliminating Circuits in Electromagnetic Ultrasonic Testing Systems[J]. Transactions of China Electrotechnical Society, 2016, 31(1): 80-84.
[1] 王淑娟,康磊,李智超,等.电磁超声换能器三维有限元分析及优化设计[J].中国电机工程学报,2009,29(30):123-128. Wang Shujuan,Kang Lei,Li Zhichao,et al.3-D finite element analysis and optimum design of electromagnetic acoustic transducers[J].Proceedings of the CSEE,2009,29(30):123-128. [2] 陈鹏,韩德来,蔡强富,等.电磁超声检测技术的研究进展[J].国外电子测量技术,2012,31(10):18-25. Chen Peng,Han Delai,Cai Qiangfu,et al.Research progress in electromagnetic acoustic testing[J].Foreign Electronic Measurement Technology,2012,31(10):18-25. [3] 刘素贞,张闯,金亮,等.电磁超声换能器的三维有限元分析[J].电工技术学报,2013,28(8):7-12. Liu Suzhen,Zhang Chang,Jin Liang,et al.3D finite element analysis of electro-magnetic ultrasonic transducers[J].Transactions of China Electrotechnical Society,2013,28(8):7-12. [4] 蔡智超,刘素贞,金亮,等.电磁声发射-电磁超声的复合检测原理及激励线圈设计[J].电工技术学报,2013,28(6):14-19. Cai Zhichao,Liu Suzhen,Jin Liang,et al.Principle of integrating electromagnetically induced acoustic emission with electromagnetic ultrasonic testing and design of exciting coil[J].Transactions of China Electrotechnical Society,2013,28(6):14-19. [5] Ziarani A K, Konrad A, Sinclair A N.A novel time-domain method of analysis of pulsed sine wave signals[J].IEEE Transactions on Instrumentation and Measurement,2003,52(3):809-814. [6] 童允,黄松岭,赵伟,等.基于包络滤波的电磁超声检测数据降噪算法[J].高技术通讯,2010,20(9):960-964. Tong Yun,Huang Songling,Zhao Wei,et al.An EMAT denoising algorithm based on envelope filtering[J].Chinese High Technology Letters,2010,20(9):960-964. [7] Zheng W X,Xiao C S.A noise suppression method for EMAT signals using a pseudo random code[C]//International Conference on Information Engineering and Computer Science,Wuhan,2010:1-3. [8] 王淑娟,康磊,翟国富.电磁超声换能器的微弱信号检测[J].无损检测,2007,29(10):591-595. Wang Shujuan,Kang Lei,Zhai Guofu.Research on weak signal detection method for electromagnetic acoustic transducer[J].Non-destructive Testing,2007,29(10):591-595. [9] 杨理践,于宁,刑燕好.电磁超声探伤回波信号的硬件处理[J].无损检测,2010,32(2):131-133. Yang Lijian,Yu Ning,Xing Yanhao.The hardware processing technique on the echo signal of electromagnetic acoustic technique[J].Non-destructive testing,2010,32(2):131-133. [10]Majid A,Saleem J,Bertilsson K.EMI filter design for high frequency power converters[C]//Proceeding of 2012 11th International Conference on Environment and Electrical Engineering,Venice,2012:586-589. [11]任晓可.电磁超声技术在钢板缺陷检测中的研究[D].天津:天津大学,2008. [12]林国荣.电磁干扰及控制[M].北京:电子工业出版社,2004. [13]赖祖武.电磁干扰防护与电磁兼容[M].北京:原子能出版社,1993.
2016, Vol. 31 
