交流电机端口特性的数字化实现方法

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1482 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In view of the motor drive for the performance test and examination requirement, the power electronic load simulation system which can simulate ac motor port features is proposed to replace traditional drive platform used in motor power testing. The mathematical model of asynchronous motor and synchronous motor are established respectively, which can be solved using Adams algorithm to obtain the port current state. In view of the motor dynamic changes, the current waveform contains transition components which are not repetitive. So PI controller is used to control the power converter input current tracking the instruction current accurately, making the converter have the same port characteristics as the actual motor. No-load starting of asynchronous motor, sudden loading and the working condition with vector closed-loop control of synchronous motor are simulated. Simulation and experimental results show that the load simulation system can simulate ac motor port characteristics flexibly and efficiently, so as to prove the validity of proposed scheme.

Key words： Motor drive Power Electronic Load (PEL) Asynchronous motor (AM) Synchronous motor (SM) PI controller motor simulator

Received: 10 September 2014 Published: 08 September 2015

PACS:

TM46

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Song Pengxian
	Li Yaohua
	Wang Ping
	Su Zhaoyang

Cite this article:

Song Pengxian,Li Yaohua,Wang Ping等. The Digital Realization Method of AC Motor Simulator[J]. Transactions of China Electrotechnical Society, 2015, 30(14): 184-192.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2015/V30/I14/184

[1] 王成智, 许赟, 邹旭东, 等. 采用改进重复控制器的大功率电力电子负载[J]. 中国电机工程学报, 2009, 29(12): 1-9. Wang Chengzhi, Xu Yun, Zou Xudong, et al. Improved repetitive control scheme for power electronic load[J]. Proceedings of the CSEE, 2009, 29(12): 1-9.
[2] 吴振兴, 王翔, 邹旭东, 等.一种三相电力电子负载的电流控制方法[J]. 中国电机工程学报, 2010, 30(30): 7-13. Wu Zhenxing, Wang Xiang, Zou Xudong, et al. A novel current control method for three-phase power electronics load[J]. Proceedings of the CSEE, 2010, 30(30): 7-13.
[3] 吴振兴, 邹旭东, 黄清军, 等. 三相电力电子负载并网变换器研究[J]. 中国电机工程学报, 2010, 30(24): 1-7. Wu Zhenxing, Zou Xudong, Huang Qingjun, et al. Research on grid connection converter of three-phase power electronic load[J]. Proceedings of the CSEE, 2010, 30(24): 1-7.
[4] 李芬. 单相背靠背绿色节能试验系统关键技术研究[D]. 武汉: 华中科技大学, 2010. Li Fe. Research of critical technology on single-phase back-to-back green recovery-energy-based system for burn-in test[D]. Wuhan: Huazhong University of Science & Technology, Sep.. 2010.
[5] 吴振兴. 三相电力电子负载特性与设计研究[D]. 武汉: 华中科技大学, 2010. Zhenxing Wu. Research on characterisitics and design of three-phase power electronics load[D]. Wuhan: Huazhong University of Science & Technology, 2010.
[6] 潘诗锋, 赵剑锋, 王浔. 大功率交流电子负载的研究[J]. 电力电子技术, 2006, 40(1): 97-100. Shifeng Pan, Jianfeng Zhao, Xun Wang, Research of High Power AC Electronic Load[J]. Power Electronic Technology, Dec., 2006, 40(1): 97-100.
[7] 赵剑锋, 潘诗锋, 王浔. 大功率能量回馈型交流电子负载及其在电力系统动模实验中的应用[J]. 电工技术学报, 2006, 21(12):35-39. Zhao Jianfeng, Pan Shifeng, Wang Xun. High power energy feedback AC electronic load and its application in power system dynamic physical simulation[J]. Transactions of China Electrotechnical Society, 2006, 21(12):35-39.
[8] N. Sureshbabu, S. Seshagiri, A. Masrur, B.K. Powell. On Real-time simulation of induction motors[J]. Proceedings of the American Control Conference San Diego, 1999, 719-723.
[9] SLATER, H.J. Real-time simulation and the virtual machine[D]. PhD Thesis, Department of Electrical Engineering, University of Newcastle Upon Tyne.
[10] JACK, A.G., ATKINSON, D.J., SLATER, H.J. Real- time emulation for power equipment development, Part 1: Real-time simulation[J], IEE Proc. Electr. Power Appl, 1998, 145(2): 92-97.
[11] SLATER, H.J., ATKINSON, D.J.JACK, A.G., Real- time emulation for power equipment development, Part 2: The virtual machine[J]. IEE Proc. Electr. Power Appl, 1998, 145(2): 153-158.
[12] 韦映川. 交流电子负载在功率负荷动态模拟实验中的设计与研究[D]. 兰州：兰州交通大学, 2013. Wei Yingchuan. Research on AC electronic load in dynamic simulation of power load[D]. Lanzhou Jiaotong University, 2013.
[13] 黄清军. 模拟电机特性的电力电子负载研究[D]. 武汉：华中科技大学, 2012. Huang Qingjun. Research on power electronic load of the motor simulator[D]. Huazhong University of Science & Technology, 2012.
[14] 黄清军,孙牧村,邹旭东. 模拟电机端口特性的电力电子负载系统设计[J]. 电力系统自动, 2013, 38(3): 71-77. Huang Qingjun, Sun Mucun, Zou Xudong. Design of power electronic load system simulating motor port characteristics[J]. Automation of Eletric Power Systems, 2013, 38(3):71-77.
[15] 金海, 黄进. 基于模型参考方法的感应电机磁链的自适应观测及参数辨识[J].电工技术学报, 2006, 21(1):65-69. Jin Hai, Huang Jin. Adaptive flux estimation and parameters identification of induction motors based on model reference approach[J]. Transactions of China Electrotechnical Society, 2006, 21(1):65-69.
[16] 徐奇伟, 宋立伟, 崔淑梅. 感应电机矢量控制中转子参数自适应辨识[J]. 电工技术学报, 2011, 26(6): 81-87. Xu Qiwei, Song Liwei, Cui Shumei. Induction motor vector control based on adaptive identification of rotor parameters[J]. Transactions of China Electrotech- nical Society, 2011, 26(6):81-87.