基于信息反馈粒子群的高精度锂离子电池模型参数辨识

doi:10.19595/j.cnki.1000-6753.tces.L80546

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (22853 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The parameter precision of lithium-ion battery model is an important factor affecting the model to simulate the static and dynamic characteristics of the battery. In recent years, particle swarm optimization (PSO) is often applied to identify the model parameter. However, PSO and its improved algorithm could encounter such problem that, the position of a particle is updating while the local optimal position of the particle and the global optimal position of all the particles stop updating, resulting in the optimization algorithm can’t obtain more precision results. In view of such problem, this paper presents an improved feedback PSO (FPSO), the position of the particle can be adjusted according to the feedback information of the particle to continue to update the local position of the particle to improve the optimization precision. Typical benchmark functions are used to validate the performance of FPSO. On the other hand, the FPSO of the paper is applied to identify the parameter of the lithium-ion battery model, and the experimental results show that, comparing with the models based on Linear PSO, Adaptive weight PSO, and Least Square (LS) parameter identification, the model using FPSO of the paper can achieve high precision.

Key words： Lithium-ion battery equivalent circuit model (ECM) model parameter identification feedback particle swarm optimization (FPSO)

Received: 06 July 2018 Published: 29 July 2019

PACS:

TM912

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Huang Kai
	Guo Yongfang
	Li Zhigang

Cite this article:

Huang Kai,Guo Yongfang,Li Zhigang. High Precision Parameter Identification of Lithium-Ion Battery Model Based on Feedback Particle Swarm Optimization Algorithm[J]. Transactions of China Electrotechnical Society, 2019, 34(zk1): 378-387.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L80546 OR https://dgjsxb.ces-transaction.com/EN/Y2019/V34/Izk1/378

[1] 关志成. 绝缘子及输变电设备外绝缘[M]. 北京: 清华大学出版社, 2006.
[2] 梁曦东, 高岩峰, 王家福, 等. 中国硅橡胶复合绝缘子快速发展历程[J]. 高电压技术, 2016, 42(9): 2888-2896.
Liang Xidong, Gao Yanfeng, Wang Jiafu, et al.Rapid development of silicone rubber composite insulator in China[J]. High Voltage Engineering, 2016, 42(9): 2888-2896.
[3] 田付强, 彭潇. 耐电晕耐电痕化绝缘材料研究进展[J]. 电工技术学报, 2017, 32(16): 3-13.
Tian Fuqiang, Peng Xiao.The research progress of corona-resistant and tracking-resistant insulating materials[J]. Transactions of China Electrotechnical Society, 2017, 32(16): 3-13.
[4] 广东电网输电设备运行分析报告(2017年版)[R]. 广州: 广东电网有限责任公司, 2018.
[5] 梁曦东, 张轶博, 殷禹, 等. 复合绝缘子的5000h多因素试验及长期性能评价[J]. 高电压技术, 2012, 38(10): 2492-2498.
Liang Xidong, Zhang Yibo, Yin Yu, et al.5000h multi-stress test procedure for silicone rubber composite insulators and its applications in long-term performance evaluation[J]. High Voltage Engineering, 2012, 38(10): 2492-2498.
[6] Chaisaengsukkul A, Kinares V, Pattanadech N.A comparison between silicone rubber and EPDM under polluted dust with ozone, UV and temperature[C]// TENCON 2010-IEEE Region 10 Conference, Fukuoka, Japan, 2010: 1272-1277.
[7] Ali M, Hackam R.Effects of saline water and temperature on surface properties of HTV silicone rubber[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2008, 15(5): 1368-1378.
[8] 周远翔, 侯非, 聂琼, 等. 温度对硅橡胶电树枝老化特性的影响[J]. 高电压技术, 2012, 38(10): 2640-2646.
Zhou Yuanxiang, Hou Fei, Nie Qiong, et al.Temper- ature effects on electrical tree aging characteristics of silicone rubber[J]. High Voltage Engineering, 2012, 38(10): 2640-2646.
[9] 李鹏, 马斌, 刘道辉, 等. 紫外线老化对复合绝缘子硅橡胶憎水性的影响[J]. 中国电力, 2015, 48(3): 80-83, 98.
Li Peng, Ma Bin, Liu Daohui, et al.Influence of ultraviolet radiation aging on hydrophobicity of silicone rubber used for composite insulator[J]. Electric Power, 2015, 48(3): 80-83, 98.
[10] 刘云鹏, 王秋莎, 律方成, 等. 紫外辐射对高温硫化硅橡胶性能影响初探[J]. 高电压技术, 2010, 36(11): 2634-2638.
Liu Yunpeng, Wang Qiusha, Lü Fangcheng, et al.Influence of UV radiation on HTV silicon rubber performance[J]. High Voltage Engineering, 2010, 36(11): 2634-2638.
[11] 祁黎, 颜景莲, 欧阳旭丹, 等. 复合绝缘子硅橡胶材料老化试验研究[J]. 电网技术, 2006, 30(12): 91-94.
Qi Li, Yan Jinglian, Ouyang Xudan, et al.Research on ageing test of silicone rubber material for composite insulators[J]. Power System Technology, 2006, 30(12): 91-94.
[12] 屠幼萍, 王倩, 李敏, 等. 臭氧浓度对HTV硅橡胶材料的老化作用[J]. 电工技术学报, 2013, 28(1): 21-28.
Tu Youping, Wang Qian, Li Min, et al.Influence of ozone concentration on deterioration of HTV silicon rubber[J]. Transactions of China Electrotechnical Society, 2013, 28(1): 21-28.
[13] Chen Can, Jia Zhidong, Wang Xilin, et al.Micro characterization and degradation mechanism of liquid silicone rubber used for external insulation[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2015, 22(1): 313-321.
[14] 彭向阳, 李子健, 黄振, 等. 基于TG-DSC法的复合绝缘子硅橡胶主组分含量研究[J]. 南方电网技术, 2017, 11(1): 36-44.
Peng Xiangyang, Li Zijian, Huang Zhen, et al.TG-DSC coupling techniques based investigation on main component content of silicone rubber composite insulators[J]. Southern Power System Technology, 2017, 11(1): 36-44.
[15] 陈灿, 王希林, 贾志东, 等. 基于高分子结晶分析方法的液体硅橡胶老化机制研究[J]. 中国电机工程学报, 2014, 34(9): 1462-1470.
Chen Can, Wang Xilin, Jia Zhidong, et al.A polymer crystallization based study on the degradation mechanism of liquid silicone rubber[J]. Proceedings of the CSEE, 2014, 34(9): 1462-1470.
[16] 覃永雄, 虞澜, 傅佳, 等. 长波紫外照射下高温硫化硅橡胶的微观物性及憎水性研究[J]. 电工技术学报, 2014, 29(12): 242-250.
Qin Yongxiong, Yu Lan, Fu Jia, et al.Research on microscopic properties and hydrophobicity high temperature vulcanization silicone rubber under long wave ultraviolet radiation[J]. Transactions of China Electrotechnical Society, 2014, 29(12): 242-250.
[17] 徐征, 吴嘉敏. 用于复合绝缘子伞裙老化状态检测的单边核磁共振传感器[J]. 电工技术学报, 2016, 31(12): 118-125.
Xu Zheng, Wu Jiamin.A portable unilateral nuclear magnetic resonance sensor used for detecting the aging status of composite insulator[J]. Transactions of China Electrotechnical Society, 2016, 31(12): 118-125.
[18] GB/T 19519—2014 架空线路绝缘子标称电压高于1000V交流系统用悬垂和耐张复合绝缘子定义、试验方法及接收准则[S]B/T 19519—2014 架空线路绝缘子标称电压高于1000V交流系统用悬垂和耐张复合绝缘子定义、试验方法及接收准则[S]. 北京: 中国标准出版社, 2014.
[19] GB/T 6553—2014 严酷环境条件下使用的电气绝缘材料评定耐电痕化和蚀损的试验方法[S]B/T 6553—2014 严酷环境条件下使用的电气绝缘材料评定耐电痕化和蚀损的试验方法[S]. 北京: 中国标准出版社, 2014.
[20] GB/T 24622—2009 绝缘子表面润湿性测量导则[S]B/T 24622—2009 绝缘子表面润湿性测量导则[S]. 北京: 中国标准出版社, 2009.
[21] 汪佛池, 黄成才, 李永刚, 等. 硅橡胶复合绝缘子老化状态评估新判据[J]. 电网技术, 2014, 38(11): 3224-3229.
Wang Fochi, Huang Chengcai, Li Yonggang, et al.A new criterion to assess aging status of silicon rubber composite insulator[J]. Power System Technology, 2014, 38(11): 3224-3229.
[22] 蔡晶, 陈灿, 石海珍, 等. 外绝缘硅橡胶材料硬化褪色现象分析及机理研究[J]. 绝缘材料, 2017, 50(10): 72-76, 81.
Cai Jing, Chen Can, Shi Haizhen, et al.Study on hardening and color fading mechanism of silicone rubber for outdoor insulation[J]. Insulating Materials, 2017, 50(10): 72-76, 81.
[23] 李晓明, 林荣伟. 用比重法测定混炼硅橡胶中橡胶的含量[J]. 电瓷避雷器, 2009, 229(3): 9-11.
Li Xiaoming, Lin Rongwei.Measurement of the rubber content in the silicone rubber compound using specific gravity method[J]. Insulators and Sure Arresters, 2009, 229(3): 9-11.
[24] 贾志东, 方苏, 杨翠茹, 等. ATH对复合绝缘子用硅橡胶性能影响的分析[J]. 陕西电力, 2007, 35(8): 1-3.
Jia Zhidong, Fang Su, Yang Cuiru, et al.Analysis about influence of ATH upon performance of composite insulator using silicone rubber[J]. Shaanxi Electric Power, 2007, 35(8): 1-3.
[25] 谢从珍, 曾磊磊, 甘永叶, 等. 基于热重红外联用的复合绝缘子芯棒热解特性研究[J]. 电工技术学报, 2018, 33(增刊1): 227-233.
Xie Congzhen, Zeng Leilei, Gan Yongye, et al.Study on pyrolysis characteristics of fiber reinforced plastic rod of composite insulators based on TG-FTIR analysis[J]. Transactions of China Electrotechnical Society, 2018, 33(S1): 227-233.
[26] 王永强, 燕迎祥, 何杰. 基于泄漏电流和红外光谱的复合绝缘子憎水性研究[J]. 高电压技术, 2015, 41(8): 2764-2771.
Wang Yongqiang, Yan Yingxiang, He Jie.Hydropho- bicity of composite insulators based on the leakage current and infrared spectroscopy[J]. High Voltage Engineering, 2015, 41(8): 2764-2771.