平面变压器高频铜损的改进建模与分析：励磁电流与环形绕组的影响机理

doi:10.19595/j.cnki.1000-6753.tces.250998

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (0 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The winding design and copper loss calculation of planar transformers are generally based on conventional one-dimensional models. However, for most planar transformers with toroidal windings, the electromagnetic field distribution is inherently non-one-dimensional. Traditional models assume a uniform electromagnetic field along the winding width. However, in toroidal windings, the field distribution is noticeably non-uniform due to differences between the inner and outer radii. Furthermore, conventional models often neglect the influence of the magnetizing current and assume that the primary and secondary magnetomotive forces (MMFs) cancel completely. In topologies such as flyback and LLC converters, magnetizing current cannot be ignored. The MMF does not fully cancel out, resulting in significant limitations in copper-loss estimation and structural design using traditional approaches.
This paper derives an analytical solution for the electromagnetic field in toroidal windings by establishing the magneto-quasistatic field equations in cylindrical coordinates and applying appropriate boundary conditions. Expressions for the AC resistance and the AC-to-DC resistance ratio are derived when the magnetic field on the winding's upper and lower surfaces is known. The proposed model shows that, under the condition that the DC resistance per turn is equal within the same layer, the AC-to-DC resistance ratio of the toroidal winding matches that of the conventional one-dimensional model. By representing the electromagnetic field in phasor form, the model incorporates the magnetizing current's influence on AC resistance. Then, multilayer winding stacking structures and the impact of magnetizing current on copper loss are analyzed. Both the magnitude and phase of the magnetizing current significantly affect copper loss, which increases with increasing magnetizing current. Moreover, a copper-loss-optimization strategy for magnetizing current is proposed. By analyzing the phasor diagram of layer currents in multilayer windings, the influence of different stacking configurations on proximity loss can be conveniently evaluated. Specifically, the path with the shortest distance to the origin in the phasor connection corresponds to the stacking structure with the minimum proximity loss. In contrast, the path with the farthest distance corresponds to the structure with the maximum proximity copper loss.
Finally, the proposed model is validated through finite element simulations and experiments. Using COMSOL 2D analysis, simulations under ideal conditions agree with the established copper-loss model. Different proximity-loss behaviors of traditional interleaved structures can be distinguished when magnetizing current is included. Under non-ideal conditions, such as winding gaps and core air gaps, the conventional model's error reaches 18%, whereas the proposed model's error remains below 2.5%. Two planar transformer prototypes with different stacking structures were fabricated, and the primary and secondary resistances were measured through open-circuit and short-circuit small-signal tests. The experimental data are highly consistent with the model predictions, with a maximum error of less than 4.2%.

Key words： Planar transformer circular winding magnetizing current interleaving structure copper loss model

Received: 09 June 2025

PACS:

TM401

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wei Jiwen
	Yang Xu
	Li Qingzheng
	Li Bingyang
	Chen Wenjie

Cite this article:

Wei Jiwen,Yang Xu,Li Qingzheng等. Improved Modeling and Analysis of High-Frequency Copper Loss in Planar Transformers: The Influence Mechanism of Magnetizing Current and Circular Windings[J]. Transactions of China Electrotechnical Society, 2026, 41(12): 3951-3967.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.250998 OR https://dgjsxb.ces-transaction.com/EN/Y2026/V41/I12/3951

[1] Yan Zhaotian, Liu Lizhou, Chen Changxin, et al.Optimized design of integrated planar matrix trans-former for LLC converter in consumer electronics[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2022, 10(2): 2254-2264.
[2] Serban E, Ali Saket M, Ordonez M.High-performance isolated gate-driver power supply with integrated planar transformer[J]. IEEE Transactions on Power Electronics, 2021, 36(10): 11409-11420.
[3] Wang Chang, Li Mingxiao, Ouyang Ziwei, et al.Pentacentra transformer for multiphase LLC converter in high-current data center application[J]. IEEE Transactions on Power Electronics, 2023, 39(1): 1150-1161.
[4] 姜盟瀚, 伍群芳, 王勤, 等. 一种考虑损耗与寄生参数的LLC四元平面矩阵变压器集成优化设计[J]. 电工技术学报, 2025, 40(10): 3195-3208.
Jiang Menghan, Wu Qunfang, Wang Qin, et al.Integrated optimization design of LLC four-element-matrix planar transformer considering loss and parasitic parameters[J]. Transactions of China Elec-trotechnical Society, 2025, 40(10): 3195-3208.
[5] Zayed O, Elezab A, Narimani M.A co-planar transformer with ultralow parasitic capacitance for EV chargers[J]. IEEE Transactions on Transportation Electrification, 2024, 10(4): 9803-9813.
[6] 桑汐坤, 王懿杰, 徐殿国. 基于输入并联输出串联的高效高升压比DC-DC变换器[J]. 电工技术学报, 2023, 38(20): 5488-5502.
Sang Xikun, Wang Yijie, Xu Dianguo.High-efficiency high voltage gain DC-DC converter based on input parallel and output series connection[J]. Transactions of China Electrotechnical Society, 2023, 38(20): 5488-5502.
[7] Yuan Tianlong, Jin Feng, Li Qiang.Analysis and comparison of integrated planar transformers for 22-kW on-board chargers[J]. IEEE Transactions on Power Electronics, 2024, 39(9): 11368-11385.
[8] Hassan M I, Keshmiri N, Callegaro A D, et al.Design optimization methodology for planar transformers for more electric aircraft[J]. IEEE Open Journal of the Industrial Electronics Society, 2021, 2: 568-583.
[9] Huang Daocheng, Ji Shu, Lee F C.LLC resonant converter with matrix transformer[J]. IEEE Transac-tions on Power Electronics, 2013, 29(8): 4339-4347.
[10] Mu Mingkai, Lee F C.Design and optimization of a 380-12 V high-frequency, high-current LLC converter with GaN devices and planar matrix transformers[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2016, 4(3): 854-862.
[11] Cai Yinsong, Ahmed M H, Li Qiang, et al.Optimized design of integrated PCB-winding transformer for MHz LLC converter[C]//2019 IEEE Applied Power Electronics Conference and Exposition (APEC), Anaheim, CA, USA, 2019: 1452-1458.
[12] 赵志刚, 张学增. LLC平面变压器绕组损耗与漏感改进有限元计算方法[J]. 电工技术学报, 2022, 37(24): 6204-6215.
Zhao Zhigang, Zhang Xuezeng.Improved finite element method of winding loss and leakage inductance for planar transformer used in LLC converter[J]. Transactions of China Electrotechnical Society, 2022, 37(24): 6204-6215.
[13] 程鹤, 徐恺, 李朋圣, 等. 三相CLLC谐振变换器磁集成平面变压器设计与优化[J]. 电工技术学报, 2024, 39(12): 3774-3786.
Cheng He, Xu Kai, Li Pengsheng, et al.Design and optimization of three-phase CLLC resonant converter with magnetic integrated planar transformer[J]. Transactions of China Electrotechnical Society, 2024, 39(12): 3774-3786.
[14] 赵志刚, 张学增, 赵瑞, 等. 平面变压器绕组损耗改进二维混合计算方法[J]. 中国电机工程学报, 2023, 43(10): 4069-4079.
Zhao Zhigang, Zhang Xuezeng, Zhao Rui, et al.Improved method of planar transformer winding loss based on two-dimensional model[J]. Proceedings of the CSEE, 2023, 43(10): 4069-4079.
[15] Dowell P L.Effects of eddy currents in transformer windings[J]. Proceedings of the Institution of Elec-trical Engineers, 1966, 113(8): 1387.
[16] Ferreira J A.Improved analytical modeling of conductive losses in magnetic components[J]. IEEE Transactions on Power Electronics, 1994, 9(1): 127-131.
[17] Perry M P. Multiple layer series connected winding design for minimum losses[J]. IEEE Transactions on Power Apparatus and Systems, 1979, PAS-98(1): 116-123.
[18] Hurley W G, Gath E, Breslin J G.Optimizing the AC resistance of multilayer transformer windings with arbitrary current waveforms[J]. IEEE Transactions on Power Electronics, 2000, 15(2): 369-376.
[19] Chen Minjie, Araghchini M, Afridi K K, et al.A systematic approach to modeling impedances and current distribution in planar magnetics[J]. IEEE Transactions on Power Electronics, 2016, 31(1): 560-580.
[20] Ewald T, Biela J.Frequency-dependent inductance and winding loss model for gapped foil inductors[J]. IEEE Transactions on Power Electronics, 2022, 37(10): 12370-12379.
[21] Gadelrab R, Lee F C, Li Qiang.Three-phase inter-leaved LLC resonant converter with integrated planar magnetics for telecom and server application[C]//2020 IEEE Applied Power Electronics Conference and Exposition (APEC), New Orleans, LA, USA, 2020: 512-519.
[22] Fei Chao, Lee F C, Li Qiang.High-efficiency high-power-density LLC converter with an integrated planar matrix transformer for high-output current applications[J]. IEEE Transactions on Industrial Electronics, 2017, 64(11): 9072-9082.
[23] Ranjram M K, Perreault D J.A 380-12 V, 1-kW, 1-MHz converter using a miniaturized split-phase, fractional-turn planar transformer[J]. IEEE Transac-tions on Power Electronics, 2022, 37(2): 1666-1681.
[24] Zhang Zhengda, Liu Chunhui, Wang Mengzhi, et al.High-efficiency high-power-density CLLC resonant converter with low-stray-capacitance and well-heat-dissipated planar transformer for EV on-board charger[J]. IEEE Transactions on Power Electronics, 2020, 35(10): 10831-10851.
[25] Li Bin, Li Qiang, Lee F C.High-frequency PCB winding transformer with integrated inductors for a bi-directional resonant converter[J]. IEEE Transac-tions on Power Electronics, 2019, 34(7): 6123-6135.
[26] Rasekh N, Wang Jun, Yuan Xibo.In-situ measu-rement and investigation of winding loss in high-frequency cored transformers under large-signal condition[J]. IEEE Open Journal of Industry Appli-cations, 2022, 3: 164-177.
[27] Barrios E L, Elizondo D, Ursúa A, et al.Winding resistance measurement in power inductors-understanding the impact of the winding mutual resistance[J]. IEEE Access, 2021, 9: 92224-92238.
[28] Cui H H, Kao M H, Xue L L, et al.Enhanced inductance and winding loss model for coupled inductors[C]//2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, MI, USA, 2020: 3518-3523.
[29] 廖家文, 张军明, 张燚, 等. LLC谐振变流器中平面变压器铜损优化设计[J]. 电工技术学报, 2012, 27(2): 109-113.
Liao Jiawen, Zhang Junming, Zhang Yi, et al.Winding loss optimization for planar transformer in LLC resonant converter[J]. Transactions of China Electrotechnical Society, 2012, 27(2): 109-113.
[30] Whitman D J, Kazimierczuk M K.Kazimierczuk. An analytical correction to dowell's equation for inductor and transformer winding losses using cylindrical coordinates[J]. IEEE Transactions on Power Elec-tronics, 2019, 34: 10425-10432.
[31] Prieto R, Oliver J Á, Cobos J A, et al.Magnetic component model for planar structures based on transmission lines[J]. IEEE Transactions on Industrial Electronics, 2010, 57(5): 1663-1669.
[32] Ouyang Ziwei, Hurley W G, Andersen M A E. Improved analysis and modeling of leakage indu-ctance for planar transformers[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2019, 7(4): 2225-2231.
[33] Vandelac J P, Ziogas P.A novel approach for mini-mizing high frequency transformer copper losses[C]//IEEE Power Electronics Specialists Conference, Blacksburg, VA, USA, 1987: 355-367.
[34] Feeney C, Zhang Jun, Duffy M.AC winding loss of phase-shifted coupled windings[J]. IEEE Transactions on Power Electronics, 2015, 31(2): 1472-1478.
[35] Li Yiming, Wang Shuo, Sheng Honggang, et al.Optimize the winding structure of flyback trans-formers with arbitrary phase-shifted current wave-forms[C]//IEEE Energy Conversion Congress and Exposition (ECCE), Baltimore, MD, USA, 2019: 6192-6199.
[36] 安少亮, 吴庆, 王博彦, 等. 一种电流密度均匀分布的平面变压器绕线宽度优化方法[J]. 电工技术学报, 2025, 40(6): 1816-1827.
An Shaoliang, Wu Qing, Wang Boyan, et al.A winding width optimization method for planar transformer with uniform distribution of current density[J]. Transactions of China Electrotechnical Society, 2025, 40(6): 1816-1827.