屏蔽罩端部表面氧化铝涂层对真空灭弧室沿面绝缘特性提升研究

doi:10.19595/j.cnki.1000-6753.tces.250743

Abstract
Figure/Table
References
Related Citation (10)

Download: PDF (7204 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The vacuum surface flashover at high voltage limits the development of vacuum interrupters (VIs) towards high voltage and miniaturization. To improve the vacuum flashover voltage of VIs, this paper proposes a method to suppress electron emission by applying an alumina coating at the end of the shield ring. Atmospheric plasma spraying was used to deposit tens of micrometers of alumina on the end of the shield ring and to investigate the effect of the alumina coating on the surface insulation characteristics of VI.
The surface insulation characteristics of the VI samples were tested under a positive lightning-impulse voltage, and the voltage and cathode-current waveforms during flashover were recorded. The electric field distribution before and after the alumina coating was compared using finite element simulations. The surface work function of the shield before and after alumina coating was compared by ultraviolet photoelectron spectroscopy. After the insulation experiment on the VI samples, the surface morphology and elemental distribution of the shield ring were analyzed using a scanning electron microscope and an energy-dispersive spectrometer.
The results show that the alumina coating can significantly improve the electric field distribution on the shield ring surface and reduce the maximum electric field intensity by 89.4%. The surface work function of the shield ring increases from 4.51 eV to 5.39 eV, a 19.5% increase. Under the positive lightning impulse voltage, when the coating thickness at the end of the shield ring is 40 micrometers, the maximum withstand voltage of the vacuum interrupter is 12.8% higher than that without coating, and the flashover voltage U₅₀ is increased by 17.3%. The alumina coating on the shield ring surface inhibits the current pulse generated by the explosive electron emission. It acts as a physical barrier to block the explosive electron emission into the vacuum. This study provides a theoretical basis for improving the surface insulation and miniaturizing vacuum interrupters.

Key words： Vacuum interrupter alumina coating vacuum surface flashover plasma spraying

Received: 06 May 2025

PACS:

TM561.2

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Feng Minglu
	Li Haomin
	Liu Zhiyuan
	Geng Yingsan
	Wang Jianhua

Cite this article:

Feng Minglu,Li Haomin,Liu Zhiyuan等. Research on the Improvement of Vacuum Surface Insulation Properties of Vacuum Interrupter by Constructing Alumina Coating on the End Surface of Shield Ring[J]. Transactions of China Electrotechnical Society, 2026, 41(8): 2867-2878.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.250743 OR https://dgjsxb.ces-transaction.com/EN/Y2026/V41/I8/2867

[1] Smeets R, Sluit L van der, Kapetanovic M, et al. Switching in electrical transmission and distribution systems[M]. Hoboken: John Wiley & Sons, Inc, 2014.
[2] 崔兆轩, 林莘, 钟建英, 等. C₄F₇N/CO₂混合气体特高压母线通流温升特性研究[J]. 电工技术学报, 2023, 38(9): 2491-2499.
Cui Zhaoxuan, Lin Xin, Zhong Jianying, et al.Study on the temperature rise characteristics of C₄F₇N/CO₂ mixed gas ultra high voltage bus[J]. Transactions of China Electrotechnical Society, 2023, 38(9): 2491-2499.
[3] Li Haomin, Wang Zihan, Geng Yingsan, et al.Arcing contact gap of a 126-kV horseshoe-type bipolar axial magnetic field vacuum interrupters[J]. IEEE Transa-ctions on Plasma Science, 2018, 46(10): 3713-3721.
[4] 李祎, 张晓星, 傅明利, 等. 环保绝缘气体C₄F₇N研究及应用进展Ⅰ: 绝缘及电、热分解特性[J]. 电工技术学报, 2021, 36(17): 3535-3552.
Li Yi, Zhang Xiaoxing, Fu Mingli, et al.Research and application progress of eco-friendly gas insulating medium C₄F₇N, part Ⅰ: insulation and electrical, thermal decomposition properties[J]. Transactions of China Electrotechnical Society, 2021, 36(17): 3535-3552.
[5] 贾申利, 贾荣照, 朱璐. 真空开断型环保GIS发展现状及趋势[J]. 高压电器, 2022, 58(9): 1-12.
Jia Shenli, Jia Rongzhao, Zhu Lu.Advances in the development of vacuum-based eco-friendly GIS[J]. High Voltage Apparatus, 2022, 58(9): 1-12.
[6] 李元钊, 丁健刚, 刘志远, 等. 并联电容对真空灭弧室内部电位分布的改善作用[J]. 电工技术学报, 2025, 40(2): 610-624.
Li Yuanzhao, Ding Jiangang, Liu Zhiyuan, et al.The improving effect of parallel capacitors on the internal potential distribution of vacuum interrupters[J]. Transactions of China Electrotechnical Society, 2025, 40(2): 610-624.
[7] 葛国伟, 王文博, 程显, 等. 基于两间隙异步联动的一体化高压真空灭弧室电场设计[J]. 电工技术学报, 2024, 39(17): 5555-5564.
Ge Guowei, Wang Wenbo, Cheng Xian, et al.Electric field design of integrated high-voltage vacuum interrupter based on two-gap asynchronous linkage[J]. Transactions of China Electrotechnical Society, 2024, 39(17): 5555-5564.
[8] 沈靖宇, 许志红, 刘志远, 等. 雷电冲击电压下串联双真空间隙的击穿极性效应[J]. 电工技术学报, 2025, 40(17): 5589-5600.
Shen Jingyu, Xu Zhihong, Liu Zhiyuan, et al.Polarity effect of breakdown for double vacuum gaps in series under lightning impulse voltage[J]. Transactions of China Electrotechnical Society, 2025, 40(17): 5589-5600.
[9] Liu Zhiyuan, Wang Jimei, Xiu Shixin, et al.Deve-lopment of high-voltage vacuum circuit breakers in China[J]. IEEE Transactions on Plasma Science, 2007, 35(4): 856-865.
[10] Matsui Y, Nagatake K, Takeshita M, et al.Deve-lopment and technology of high voltage VCBs; breaf history and state of art[C]//2006 International Sympo-sium on Discharges and Electrical Insulation in Vacuum, Matsue, Japan, 2006: 253-256.
[11] 王建华, 耿英三, 刘志远. 输电等级单断口真空断路器理论及其技术[M]. 北京: 机械工业出版社: 智能制造与装备制造业转型升级丛书, 2016.
[12] 李世民, 徐勋晨, 张潮海. 基于深度学习的冲击电压老炼过程中真空击穿机制甄别优化方法[J]. 电工技术学报, 2024, 39(13): 4153-4163.
Li Shimin, Xu Xunchen, Zhang Chaohai.Optimi-zation method for classifying breakdown mechanism during impulse voltage conditioning process based on deep learning[J]. Transactions of China Electro-technical Society, 2024, 39(13): 4153-4163.
[13] 孙丽琼, 王振兴, 何塞楠, 等. 126kV真空断路器分离磁路式永磁操动机构[J]. 电工技术学报, 2015, 30(20): 49-56.
Sun Liqiong, Wang Zhenxing, He Sainan, et al.A permanent magnetic actuator with separated magnetic circuit for 126kV vacuum circuit breakers[J]. Transa-ctions of China Electrotechnical Society, 2015, 30(20): 49-56.
[14] Nakano Y, Funayama Y, Tanaka Y, et al.Impro-vement of dielectric strength of vacuum interrupter by installing barrier on insulator surface[J]. IEEE Transactions on Power Delivery, 2024, 39(1): 122-129.
[15] Schellekens H, Gaudart G.Compact high-voltage vacuum circuit breaker, a feasibility study[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2007, 14(3): 613-619.
[16] 赵树生, 惠杰, 刘博嘉, 等. 真空灭弧室击穿分析及仿真优化[J]. 电气技术, 2024, 25(7): 81-84.
Zhao Shusheng, Hui Jie, Liu Bojia, et al.Analysis of breakdown and simulation optimization for vacuum interrupter[J]. Electrical Engineering, 2024, 25(7): 81-84.
[17] Miller H C.Flashover of insulators in vacuum: the last twenty years[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2015, 22(6): 3641-3657.
[18] 李盛涛, 聂永杰, 闵道敏, 等. 固体电介质真空沿面闪络研究进展[J]. 电工技术学报, 2017, 32(8): 1-9.
Li Shengtao, Nie Yongjie, Min Daomin, et al.Research progress on vacuum surface flashover of solid dielectrics[J]. Transactions of China Electro-technical Society, 2017, 32(8): 1-9.
[19] Kulkarni S, Hemachander M, Kumar A, et al.Signi-ficance of shields in high voltage performance of vacuum interrupters[C]//2012 25th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Tomsk, Russia, 2012: 57-59.
[20] Kusa R, Fujita I, Yamano Y, et al.Influence of field relaxation ring length on vacuum flashover voltage in model sample of vacuum interrupter[C]//2019 5th International Conference on Electric Power Equipment-Switching Technology (ICEPE-ST), Kitakyushu, Japan, 2019: 490-493.
[21] Yoon J H, Lim K J.Behavior of surface flashover depending on shape and gap distance of end shield in vacuum interrupter[J]. Journal of the Korean Institute of Electrical and Electronic Material Engineers, 2010, 23(2): 169-173.
[22] Venna K R, Schramm H H.Simulation analysis on reducing the electric field stress at the triple junctions & on the insulator surface of the high voltage vacuum interrupters[C]//2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Mumbai, India, 2014: 53-56.
[23] Fukuda H, Ishikawa K, Yamamura K, et al.Investigation on surface charge distribution inside of cylindrical alumina insulator of vacuum bulb under AC voltage application[C]//2016 27th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Suzhou, China, 2016: 1-4.
[24] Sasaki Y, Yamano Y, Fukuda H, et al.Experimental study on relationship between performance of surface flashover voltage and surface charging in a cylindrical insulating system[C]//2023 30th International Sympo-sium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Okinawa, Japan, 2023: 93-95.
[25] Gossmann S, Hammer T.Modeling of surface flashover in vacuum interrupters using 3D particle-in-cell simulation[C]//2023 30th International Sym-posium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Okinawa, Japan, 2023: 85-88.
[26] Fukuda H, Fujita I, Yamano Y, et al.Charge distribution and charging characteristics of cylindrical alumina insulator with shield rings in vacuum[C]//2018 28th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV), Greifswald, Germany, 2018: 139-142.
[27] Mayberry C S, Wroblewski B, Schamiloglu E, et al.Suppression of vacuum breakdown using thin-film coatings[J]. Journal of Applied Physics, 1994, 76(7): 4448-4450.
[28] Jedynak L.Vacuum insulation of high voltages utilizing dielectric coated electrodes[J]. Journal of Applied Physics, 1964, 35(6): 1727-1733.
[29] Zheng Yu, Gong Shengle, Liu Lei, et al.Effect of SiO₂ nano film deposited on copper and aluminium electrodes on the power frequency breakdown voltage of SF₆ gas[J]. High Voltage, 2023, 8(4): 791-798.
[30] Wu Shilin, Yang Qing, Zhang Zhaotian, et al.Deposition of SiO₂ and TiO₂ films on electrode materials to suppress space charge injection[J]. IEEE Transactions on Plasma Science, 2020, 48(11): 3895-3904.
[31] Nakano Y, Kojima H, Tsuchiya K, et al.Impulse surface flashover development associated with transient charging by explosive electron emission in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2015, 22(4): 2390-2397.
[32] Mesyats G A.Cathode Phenomena in a Vacuum Discharge: the Breakdown, the Spark, and the Arc[M]. Moscow: Nauka Publishers, 2000.
[33] Simmons J G.Generalized formula for the electric tunnel effect between similar electrodes separated by a thin insulating film[J]. Journal of Applied Physics, 1963, 34(6): 1793-1803.
[34] Pages L, Bertel E, Joffre H, et al.Energy loss, range, and bremsstrahlung yield for 10-keV to 100-MeV electrons in various elements and chemical com-pounds[J]. Atomic Data & Nuclear Data Tables, 1972, 4(1): 1-27.