基于功率注入潮流模型的双极直流配电网的电压不平衡分析及传递计算

doi:10.19595/j.cnki.1000-6753.tces.240497

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2175 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The bipolar DC distribution network offers high power supply reliability, extensive transmission capacity, and adaptable voltage levels. Developing a bipolar DC distribution network represents an effective strategy for constructing a new type of distribution network. Voltage unbalance constitutes a distinctive power quality issue within bipolar DC distribution networks. Power flow calculation serves as the fundamental tool for analyzing voltage imbalance. Nevertheless, conventional power flow calculation methods merely illustrate the transfer outcomes of voltage unbalance, failing to depict its transfer process within the network. Furthermore, in practical engineering, power is often the measured electrical quantity rather than current, making the existing power flow model based on injected current unsuitable for meeting the application requirements. Hence, this paper proposes a power-injection equation to analyze and quantify the transfer characteristics associated with voltage unbalance.
Initially, the generation and transfer mechanism of voltage unbalance within the bipolar DC distribution network is studied. The voltage unbalance transfer matrix grounded on sensitivity is established to depict the transfer characteristics of voltage unbalance factors at individual nodes. Furthermore, the analytical formulations for each component of the voltage unbalance transfer matrix are derived, and a power flow calculation technique based on the Newton-Raphson method is proposed for determining the matrix. The suggested method employs a power-injection equation for power flow modeling and integrates droop control and comprehensive load models of distributed generation. Finally, the effectiveness of the proposed approach is validated via the modified IEEE 33-node test system. Three case studies are conducted.
Numerical results reveal the following findings. (1) The proposed power flow calculation method exhibits a negligible sacrifice in accuracy, with no more than a 0.83% deviation and a calculation efficiency enhancement of 44%. Additionally, it offers the advantage of accommodating constant power loads, which is suitable for high prevalence power load or load data readily available scenarios. (2) The voltage unbalance transfer matrix effectively illustrates voltage unbalance factors’ alterations and transfer conditions at each node under disturbance conditions. Disturbances induce voltage unbalances that propagate throughout the network following the direction of power flow. Measures must be implemented to block or suppress it at critical network nodes. For instance, strategies such as load switching and energy storage scheduling encourage multi-point loads to adjust in a more balanced manner simultaneously, curtailing unbalanced transfer. Moreover, incorporating a power spring in series with a constant resistance load near the line's terminus can introduce intelligent load management, affording greater flexibility in system voltage unbalance adjustment. The deployment of voltage-regulating equipment, such as DC transformers and voltage balancers, is instrumental in obstructing unbalanced voltage transfer.

Key words： Voltage unbalance transfer bipolar DC distribution network sensitivity Newton-Raphson method

Received: 29 March 2024

PACS:

TM744

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhou Yiyao
	Wang Qianggang
	Kuang Jiangfeng
	Liao Jianquan
	Wang Hongbin

Cite this article:

Zhou Yiyao,Wang Qianggang,Kuang Jiangfeng等. Voltage Unbalance Analysis and Transfer Calculation of Bipolar DC Distribution Network Based on Power Injection Power Flow Model[J]. Transactions of China Electrotechnical Society, 2025, 40(8): 2656-2667.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.240497 OR https://dgjsxb.ces-transaction.com/EN/Y2025/V40/I8/2656

[1] 何东, 蒋磊, 兰征, 等. 基于常通型SiC JFET器件的中低压直流固态断路器研究综述[J]. 电工技术学报, 2024, 39(22): 7213-7227.
He Dong, Jiang Lei, Lan Zheng, et al.Review of research on medium and low voltage DC solid-state circuit breakers based on normally-on SiC JFETs[J]. Transactions of China Electrotechnical Society, 2024, 39(22): 7213-7227.
[2] 廖建权, 周念成, 王强钢. 辐射型双极直流配电网不平衡电压分析及抑制[J]. 中国电机工程学报, 2019, 39(18): 5380-5388, 5585.
Liao Jianquan, Zhou Niancheng, Wang Qianggang.Analysis and suppression of unbalanced voltage in radiant bipolar DC distribution network[J]. Pro-ceedings of the CSEE, 2019, 39(18): 5380-5388, 5585.
[3] 王强钢, 周亦尧, 廖建权, 等. 直流配电网电能质量研究综述[J]. 电力系统自动化, 2023, 47(7): 193-207.
Wang Qianggang, Zhou Yiyao, Liao Jianquan, et al.Review on power quality in DC distribution network[J]. Automation of Electric Power Systems, 2023, 47(7): 193-207.
[4] Lee J O, Kim Y S, Moon S I.Current injection power flow analysis and optimal generation dispatch for bipolar DC microgrids[J]. IEEE Transactions on Smart Grid, 2021, 12(3): 1918-1928.
[5] Zhou Yiyao, Wang Qianggang, Huang Tao, et al.Convex optimal power flow based on power injection-based equations and its application in bipolar DC distribution network[J]. Electric Power Systems Research, 2024, 230: 110271.
[6] Chew B S H, Xu Yan, Wu Qiuwei. Voltage balancing for bipolar DC distribution grids: a power flow based binary integer multi-objective optimization app-roach[J]. IEEE Transactions on Power Systems, 2019, 34(1): 28-39.
[7] Lee J O, Kim Y S, Jeon J H.Generic power flow algorithm for bipolar DC microgrids based on Newton-Raphson method[J]. International Journal of Electrical Power & Energy Systems, 2022, 142: 108357.
[8] Lee J O, Kim Y S, Jeon J H.Optimal power flow for bipolar DC microgrids[J]. International Journal of Electrical Power & Energy Systems, 2022, 142: 108375.
[9] 周念成, 张渝, 廖建权, 等. 计及直流变压器控制的多电压等级双极直流配电网线性化潮流计算[J]. 中国电机工程学报, 2022, 42(6): 2070-2083.
Zhou Niancheng, Zhang Yu, Liao Jianquan, et al.Linearization formulation based power flow calculation of multiple-voltage grades bipolar DC distribution network considering control modes of DC transformer[J]. Proceedings of the CSEE, 2022, 42(6): 2070-2083.
[10] Montoya O D.On the existence of the power flow solution in DC grids with CPLs through a graph-based method[J]. IEEE Transactions on Circuits and Systems II: Express Briefs, 2020, 67(8): 1434-1438.
[11] 许丹, 王斌, 张晓天, 等. 考虑节点控制模式的柔性直流电网潮流线性化计算方法[J]. 电力系统自动化, 2017, 41(19): 54-58, 73.
Xu Dan, Wang Bin, Zhang Xiaotian, et al.Linearized calculating method for power flow of flexible DC power grid considering node control mode[J]. Automation of Electric Power Systems, 2017, 41(19): 54-58, 73.
[12] Wang Hongbin, Zhou Niancheng, Zhang Yu, et al.Linearized power flow calculation of bipolar DC dis-tribution network with multiple flexible equipment[J]. International Journal of Electrical Power & Energy Systems, 2024, 155: 109568.
[13] 何大禄, 廖建权, 王强钢. 基于三有源桥串并联直流潮流控制器的环形双极直流配电网不平衡潮流抑制[J]. 电工技术学报, 2022, 37(11): 2837-2848.
He Dalu, Liao Jianquan, Wang Qianggang.Triple active bridge power flow controller based unbalanced power flow suppression for ring bipolar DC dis-tribution network[J]. Transactions of China Electro-technical Society, 2022, 37(11): 2837-2848.
[14] 陈珩. 电力系统稳态分析[M]. 4版. 北京: 中国电力出版社, 2015.
[15] 李博通, 刘涛, 杨昕陆, 等. 故障自清除型直流配电网新型双极短路故障元件识别方法[J]. 电工技术学报, 2022, 37(17): 4423-4434.
Li Botong, Liu Tao, Yang Xinlu, et al.New fault element identification method of bipolar short-circuit fault in DC distribution network with fault self-clearing[J]. Transactions of China Electrotechnical Society, 2022, 37(17): 4423-4434.
[16] 王伟, 帅智康, 李杨, 等. 基于固态断路器主动注入式直流故障测距方法[J]. 电工技术学报, 2024, 39(8): 2360-2370.
Wang Wei, Shuai Zhikang, Li Yang, et al.Active injection DC fault location method base on solid-state circuit breaker[J]. Transactions of China Electro-technical Society, 2024, 39(8): 2360-2370.
[17] Liao Jianquan, Liu Yangtao, Guo Chunsheng, et al.Power quality of DC microgrid: index classification, definition, correlation analysis and cases study[J]. International Journal of Electrical Power & Energy Systems, 2024, 156: 109782.
[18] 周文, 苏灿, 胡雪凯, 等. 直流配电系统电能质量探析[J/OL]. 电源学报, http://kns.cnki.net/kcmsdetail/12.1420.TM.20230224.1111.004.html.
Zhou Wen, Su Can, Hu Xuekai, et al. Analysis of power quality in DC distribution system[J/OL]. Journal of Power Supply, http://kns.cnki.net/kcmsdetail/12.1420.TM.20230224.1111.004.html.
[19] Pires V F, Cordeiro A, Roncero-Clemente C, et al.DC-DC converters for bipolar microgrid voltage balancing: a comprehensive review of architectures and topologies[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2023, 11(1): 981-998.
[20] Gan Lingwen, Low S H.Optimal power flow in direct current networks[J]. IEEE Transactions on Power Systems, 2014, 29(6): 2892-2904.
[21] Farivar M, Low S H.Branch flow model: relaxations and convexification: part I[J]. IEEE Transactions on Power Systems, 2013, 28(3): 2554-2564.
[22] 刘朋, 贾燕冰, 韩肖清. 含双有源全桥变换器多电压等级直流配电网潮流分析与计算[J]. 电网技术, 2021, 45(2): 741-750.
Liu Peng, Jia Yanbing, Han Xiaoqing.DAB-based power flow analysis and calculation for multi-voltage grades DC distribution network[J]. Power System Technology, 2021, 45(2): 741-750.
[23] Li Guanzhi, Zhang Aining, Zhang Qizhi, et al.Pearson correlation coefficient-based performance enhancement of broad learning system for stock price prediction[J]. IEEE Transactions on Circuits and Systems II: Express Briefs, 2022, 69(5): 2413-2417.