双层永磁体结构高速永磁电机转子涡流损耗解析模型

doi:10.19595/j.cnki.1000-6753.tces.231321

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1180 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

High-speed permanent magnet motor (HSPMM) has the advantages of high efficiency, fast dynamic response, etc. and is widely used in the field of high motor performance requirements. Due to the poor heat dissipation condition of surface-mounted HSPMM, the permanent magnet (PM) will face the risk of irreversible demagnetization if the eddy current loss on the rotor retaining sleeve and PMs is high. The eddy current loss of the double-layer permanent magnet (DLPM) rotor structure can be effectively restrained by using the PM with high resistivity in the outer layer. However, the calculation time of eddy current loss of the rotor in different ratio of the structure by finite element software is long, which is not conducive to the initial design and optimization of the motor. Based on the exact subdomain method, an analytical model of rotor eddy current loss of DLPM structure is established, which can shorten the calculation time of rotor eddy current loss.
The research idea of this paper is as follows Firstly, the motor is divided into 7 subdomains, such as outer permanent magnet subdomain, inner permanent magnet subdomain, retaining sleeve subdomain, etc. Laplacian equation and diffusion equation are written for different subdomains, and the general solution of vector magnetic potential in each subdomain is obtained according to the continuous boundary conditions of vector magnetic potential and tangential magnetic field strength as well as the ferromagnetic boundary conditions of each subdomain. Then the eddy current losses in different subdomains are obtained by Poynting theorem. Secondly, a two-dimensional finite element model is established to compare the air gap flux density obtained by the analytical model and the rotor eddy current loss. The deviation between the analytical model and the finite element is within the allowable range of engineering and meets the accuracy requirements. Finally, the analytical model is verified by the C-type core loss experiment, and the analytical calculation results are compared with the finite element and C-type core experiment results, and the error is less than 5%, which further verifies the accuracy of the analytical model.
In addition, the influence of different material and thickness of outer PM on eddy current loss and magnetic steel cost of HSPMM is investigated by using analytical model. Taking the motor studied in this paper as an example, when the magnetic density of the air gap is unchanged, the outer permanent magnet is bonded NdFeB or Ferrite with the same thickness, and the inhibition effect on eddy current loss of the rotor is similar, but when the bonded NdFeB with strong magnetic properties is used, the amount of sintered NdFeB in the inner layer is reduced by about 20% Therefore, for the DLPM rotor structure, the thickness and material of the outer permanent magnet should be determined by weighing the reduction of eddy current loss of the rotor and the amount of the inner permanent magnet.

Key words： Double layer permanent magnet high speed permanent magnet motor accurate subdomain model C-shape core experiment

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Tong Wenming
	Yang xiankai
	Lu Jiwen
	Jia jianguo
	Li weidong

Cite this article:

Tong Wenming,Yang xiankai,Lu Jiwen等. Rotor Eddy Current Loss Analytical Model for High-speed Permanent Magnet Motor Based on Double Layer Permanent Magnet Structure[J]. Transactions of China Electrotechnical Society, 0, (): 1321-1321.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.231321 OR https://dgjsxb.ces-transaction.com/EN/Y0/V/I/1321

[1] 董剑宁,黄允凯,金龙,等.高速永磁电机设计与分析技术综述[J].中国电机工程学报,2014,34(27):4640-4653.
Dong Jianning, Huang Yunkai, Jin Long, et al.Review on high speed permanent magnet machines including design and analysis technologies[J]. Proceedings of the CSEE, 2014, 34(27): 4640-4653(in Chinese).
[2] 戴睿,张岳,王惠军等.基于多物理场近似模型的高速永磁电机多目标优化设计[J].电工技术学报,2022,37(21):5414-5423.
Dai Rui, Zhang Yue, Wang Huijun, et al.Multi-Objective Optimization Design of High-Speed Permanent Magnet Machine Based on Multi-Physics Approximate Model[J]. Transactions of China Electro technical Society, 2022, 37(21): 5414-5423(in Chinese).
[3] 杨江涛,王镇宇,冯垚径等.高速永磁电机转子过盈方式对转子应力的影响[J].电工技术学报,2023,38(16):4263-4273.
Yang Jiangtao, Wang Zhenyu, Feng Yaojing, et al.Influence of Shrink Fitting Modes on Rotor Stress of High Speed Permanent Magnet Machine[J]. Transactions of China Electro technical Society, 2023, 38(16): 4263-4273(in Chinese).
[4] 李玮,汪泽润,张凤阁.基于FEM/Kriging近似模型结合进化算法的表贴式高速永磁电机转子强度优化[J].电工技术学报,2023,38(04):936-944+956.
Li wei, Wang Zerun, Zhang Fenge. Rotor Strength Optimization of Surface Mount High Speed Permanent Magnet Motor Based on FEM/Kriging Approximate Model and Evolutionary Algorithm [J]. Transactions of China Electro technical Society, 2023, 38(04): 936-944+956.
[5] Zhang Y, McLoone S, Cao W. Electromagnetic loss modeling and demagnetization analysis for high speed permanent magnet machine[J]. IEEE Transactions on Magnetics, 2017, 54(3): 1-5.
[6] Yon J M, Mellor P H, Wrobel R, et al.Analysis of semipermeable containment sleeve technology for high-speed permanent magnet machines[J]. IEEE Transactions on Energy Conversion, 2012, 27(3): 646-653.
[7] 张忠明,邓智泉,孙权贵,等.铜屏蔽层对高速永磁无刷直流电机转子涡流损耗和应力的影响分析[J].中国电机工程学报,2018,38(08):2476-2486+2557.
Zhang Zhongming, Deng Zhiquan, Sun Quangui, et al. Influence of Copper Shield on Eddy Current Loss and Stress of High Speed Permanent Magnet Brushless DC Motor[J]. Proceedings of the CSEE, 2018, 38(08): 2476-2486+2557.
[8] Cheng X, Xu W, Du G, et al.Novel Rotors with Low Eddy Current Loss for High Speed Permanent Magnet Machines[J]. CES Transactions on Electrical Machines and Systems, 2019, 3(2): 187-194.
[9] 曹龙飞,范兴纲,李大伟等.基于快速有限元的永磁电机绕组涡流损耗半解析高效计算[J].电工技术学报,2023,38(01):153-165.
Cao Longfei, Fan Xinggang, Li Dawei, et al.Semi Analytical and Efficient Calculation Method of Eddy Current Loss in Windings of Permanent Magnet Machines Based on Fast Finite Element Method[J]. Transactions of China Electro technical Society, 2023, 38(01): 153-165(in Chinese).
[10] Wang J, Atallah K, Chin R, et al.Rotor eddy-current loss in permanent-magnet brushless AC machines[J]. IEEE Transactions on Magnetics, 2010, 46(7): 2701-2707.
[11] Chiodetto N, Bianchi N, Alberti L, et al.Improved analytical estimation of rotor losses in high-speed surface-mounted PM synchronous machines[J]. IEEE Transactions on Industry Applications, 2017, 53(4): 3548-3556.
[12] Ou J, Liu Y, Liang D, et al.Investigation of PM eddy current losses in surface-mounted PM motors caused by PWM[J]. IEEE Transactions on Power Electronics, 2019, 34(11): 11253-11263.
[13] Wu L J, Zhu Z Q, Staton D, et al.Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines[J]. IEEE Transactions on Magnetics, 2012, 48(3): 1234-1247.
[14] Zhang Z, Deng Z, Sun Q, et al.Analytical modeling and experimental validation of rotor harmonic eddy-current loss in high-speed surface- mounted permanent magnet motors[J]. IEEE Transactions on Magnetics, 2019, 55(2): 1-11.
[15] 佟文明,侯明君,孙鲁,等.基于精确子域模型的带护套转子高速永磁电机转子涡流损耗解析方法[J].电工技术学报,2022,37(16):4047-4059.
Tong W, Hou M, Lu J, et al.Analysis Method of Rotor Eddy Current Loss in high-Speed Permanent Magnet Motor with Sleeve Rotor Based on Accurate Subdomain Model[J]. Transactions of China Electro technical Society, 2022, 37(16): 4047-4059.
[16] 陈春涛,吴新振,郑晓钦,等.基于改进等效面电流法的永磁电机气隙磁场解析计算[J].中国电机工程学报,2021,41(S1):315-323.
Chen Chuntao, Wu Xinzhen, Zheng Xiaoqin, et al.Analytical calculation of air-gap magnetic field of permanent-magnet motor based on improved equivalent surface current method[J]. Proceedings of the CSEE, 2021, 41(S1): 315-323(in Chinese).
[17] Liang C, Wang J, Nair S S.An analytical method for predicting 3D eddy current loss in permanent magnet machines based on generalized image theory[J]. IEEE Transactions on Magnetics, 2016, 52(6): 1-11.
[18] 佟文明,侯明君,鹿吉文等.基于负载磁场考虑涡流反作用的带护套高速永磁电机转子涡流损耗解析模型[J].中国电机工程学报,2022,42(24):9072-9084.
Tong W, Hou M, Lu J, et al.An Analytical Model of Eddy Current Loss for a sheathing High Speed Permanent Magnet Motor Rotor Based on Load Field Considering Eddy Current Reaction[J]. Proceedings of the CSEE, 2022, 42(24): 9072-9084.
[19] Tong W, Li S, Pan X, et al.Analytical model for cogging torque calculation in surface-mounted permanent magnet motors with rotor eccentricity and magnet defects[J]. IEEE Transactions on Energy Conversion, 2020, 35(4): 2191-2200.
[20] Qin W, Lv G, Ma Y.Three-dimensional Analytical Modeling of Axial Flux Permanent Magnets Maglev Motor[J]. CES Transactions on Electrical Machines and Systems, 2022, 6(4): 438-444.
[21] 张守首,郭思源.考虑分段斜极和磁性槽楔的永磁同步电机磁场解析方法[J].电工技术学报,2019,34(1):11-22.
Zhang Shoushou, Guo Siyuan.Analytical magnetic field method of permanent magnet synchronous machine considering step-skewed magnets and magnetic slot wedge[J]. Transactions of China Electrotechnical Society, 2019, 34(1): 11-22.
[22] Hannon B, Sergeant P, Dupre L, et al.Two-Dimensional Fourier-Based Modeling of Electric Machines--An Overview[J]. IEEE Transactions on Magnetics, 2019, 55(10): 1-17.
[23] Pfister P, Yin X, Fang Y.Slotted permanent-magnet machines: general analytical model of magnetic fields, torque, eddy currents, and permanent-magnet power losses including the diffusion effect[J]. IEEE Transactions on Magnetics, 2016, 52(5): 1-13.
[24] Wu L J, Zhu Z Q.Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines[J]. IEEE Transactions on Industrial Electronics, 2014, 61(9):4990-4999.
[25] Tong W, Sun L, Hou M, et al.Analytical Modeling for Rotor Eddy Current Loss of a Surface-Mounted PMSM With Both Non-Ferromagnetic Conductive Retaining Sleeve and Shielding Cylinder[J]. IEEE Transactions on Energy Conversion, 2022, 37(2): 832-843.