计及二次侧开关开路故障的半有源桥变换器多模式容错运行策略

doi:10.19595/j.cnki.1000-6753.tces.230073

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (7139 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Semi-dual active bridge (S-DAB) converter is widely applied for scenarios requiring unidire- ctional power flow, such as electric vehicle charging and PV generation. Considering that the secondary side switch open-circuit fault of the S-DAB converter may threaten the normal operation of the system, the S-DAB converter should be able to maintain uninterrupted operation after a fault. This paper presents a fault diagnosis and fault-tolerant method for the S-DAB converter under open-circuit fault.
When an open-circuit fault occurs in the secondary side switch of the S-DAB converter, the current flow path is changed, leading to an abnormal state of the circuit, including a DC bias generated by the transformer current and a significant change in the periodic average of the AC voltage on the secondary side bridge at the moment of an open-circuit fault. Therefore, a fault diagnosis system based on voltage measurement is designed. The proposed strategy requires only one additional voltage sensor to identify the location of the fault switch, improving the reliability of the S-DAB converter at a low cost.
According to the previous analysis, the circuit topology is no longer symmetrical when an open-circuit fault occurs in the secondary side switch of the S-DAB converter, causing DC bias of leakage current. To eliminate DC bias, a fault-tolerant single active bridge (SAB) operation method is proposed. Specifically, after an open-circuit fault occurs in any switch on the secondary side of the S-DAB converter, the driving signal of the other switch is blocked. As a result, the secondary bridge is transformed into a diode bridge, forming a symmetrical circuit structure. Based on the proposed fault-tolerant SAB mode, the DC component of the leakage current caused by the fault switch can be eliminated. The potential damage caused by excessive current can be avoided, effectively ensuring the safe operation of the switch, capacitor, and inductor components of the circuit. Furthermore, the S-DAB converter still has a specific power transfer capability after the fault-tolerant operation.
An experimental prototype is built. The normal operation, open-circuit fault operation, and fault-tolerant operation of the S-DAB converter are experimentally verified. According to the experimental results, the proposed fault diagnosis strategy and fault-tolerant method can accurately locate and remove open-circuit faults within four cycles and promote the reliability tolerance of the S-DAB converter.

Key words： Semi-dual active bridge (S-DAB) converter open-circuit fault fault diagnosis fault-tolerant operation reliability

Received: 18 January 2023

PACS:

TM46

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Guan Shuo
	Ma Jianjun
	Zhu Miao
	Zhang Dezhen

Cite this article:

Guan Shuo,Ma Jianjun,Zhu Miao等. Multi-Mode Fault-Tolerant Operation Strategy of Semi-Dual Active Bridge Converter Considering Open-Circuit Fault of the Secondary Side Switch[J]. Transactions of China Electrotechnical Society, 2024, 39(6): 1843-1858.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.230073 OR https://dgjsxb.ces-transaction.com/EN/Y2024/V39/I6/1843

[1] 范恩泽, 李耀华, 葛琼璇, 等. 基于优化移相的双有源串联谐振变换器前馈控制策略[J]. 电工技术学报, 2022, 37(20): 5324-5333.
Fan Enze, Li Yaohua, Ge Qiongxuan, et al.Feed- forward control strategy of dual active bridge series resonant converter based on optimized phase shift[J]. Transactions of China Electrotechnical Society, 2022, 37(20): 5324-5333.
[2] 孙凯, 贲洪奇, 孟涛, 等. 一种具有宽输出调压范围与低电压应力的单级无桥隔离型PFC变换器[J]. 电工技术学报, 2022, 37(8): 1991-2005.
Sun Kai, Ben Hongqi, Meng Tao, et al.A single-stage bridgeless isolated PFC converter with wide output voltage range and low voltage stress[J]. Transactions of China Electrotechnical Society, 2022, 37(8): 1991-2005.
[3] Ma Jianjun, Zhu Miao, Cai Xu, et al.DC substation for DC grid-part I: comparative evaluation of DC substation configurations[J]. IEEE Transactions on Power Electronics, 2019, 34(10): 9719-9731.
[4] Ma Jianjun, Zhu Miao, Li Yunwei, et al.Monopolar fault reconfiguration of bipolar half bridge converter for reliable load supply in DC distribution system[J]. IEEE Transactions on Power Electronics, 2022, 37(9): 11305-11318.
[5] De Doncker R W A A, Divan D M, Kheraluwala M H. A three-phase soft-switched high-power-density DC/DC converter for high-power applications[J]. IEEE Transactions on Industry Applications, 1991, 27(1): 63-73.
[6] Cheng S J, Lo Y K, Chiu H J, et al.High-efficiency digital-controlled interleaved power converter for high power PEM fuel-cell applications[J]. IEEE Transactions on Industrial Electronics, 2013, 60(2): 773-780.
[7] 丁超, 李勇, 姜利, 等. 电动汽车直流充电系统LLC谐振变换器软开关电压边界分析[J]. 电工技术学报, 2022, 37(1): 3-11.
Ding Chao, Li Yong, Jiang Li, et al.Analysis of soft switching voltage boundary of LLC resonant con- verter for EV DC charging system[J]. Transactions of China Electrotechnical Society, 2022, 37(1): 3-11.
[8] 唐钧涛, 戚志东, 裴进, 等. 基于电荷泵的燃料电池有源网络升压变换器[J]. 电工技术学报, 2022, 37(4): 905-917.
Tang Juntao, Qi Zhidong, Pei Jin, et al.An active network DC-DC boost converter with a charge pump employed in fuel cells[J]. Transactions of China Elec- trotechnical Society, 2022, 37(4): 905-917.
[9] Kulasekaran S, Ayyanar R.Analysis, design and experimental results of the semidual-active-bridge converter[J]. IEEE Transactions on Power Electronics, 2013, 29(10): 5136-5147.
[10] 王聪, 沙广林, 王俊, 等. 基于双重移相控制的双有源桥DC-DC变换器的软开关[J]. 电工技术学报, 2015, 30(12): 106-113.
Wang Cong, Sha Guanglin, Wang Jun, et al.The analysis of zero voltage switching dual active bridge DC-DC converters based on dual-phase-shifting control[J]. Transactions of China Electrotechnical Society, 2015, 30(12): 106-113.
[11] 武琳, 刘志刚, 洪祥. 隔离式双向全桥DC-DC变换器的功率控制特性比较与分析[J]. 电工技术学报, 2013, 28(10): 179-187.
Wu Lin, Liu Zhigang, Hong Xiang.Comparison and analysis of power control characteristic for isolated bidirectional full-bridge DC-DC converter[J]. Transa- ctions of China Electrotechnical Society, 2013, 28(10): 179-187.
[12] Sha Deshang, You Fulin, Wang Xiao.A high- efficiency current-fed semi-dual-active bridge DC-DC converter for low input voltage applications[J]. IEEE Transactions on Industrial Electronics, 2016, 63(4): 2155-2164.
[13] Sha Deshang, Zhang Jiankun, Xu Yaxiong.Improved boundary operation for voltage-fed semi-DAB with ZVS achievement and nonactive power reduction[J]. IEEE Transactions on Industrial Electronics, 2017, 64(8): 6179-6189.
[14] Rafi M A H, Bauman J. Optimal control of semi-dual active bridge DC/DC converter with wide voltage gain in a fast-charging station with battery energy storage[J]. IEEE Transactions on Trans- portation Electrification, 2022, 8(3): 3164-3176.
[15] Sha Deshang, Zhang Jiankun, Sun Tengfei.Multi- mode control strategy for SiC MOSFETs based semi-dual active bridge DC-DC converter[J]. IEEE Transactions on Power Electronics, 2019, 34(6): 5476-5486.
[16] Yang Shaoyong, Bryant A, Mawby P, et al.An industry-based survey of reliability in power elec- tronic converters[J]. IEEE Transactions on Industry Applications, 2011, 47(3): 1441-1451.
[17] 胡亮灯, 孙驰, 陈玉林, 等. 大功率IGBT的短路故障检测[J]. 电工技术学报, 2018, 33(11): 2592-2603.
Hu Liangdeng, Sun Chi, Chen Yulin, et al.Short- circuit fault detection for high-power IGBT[J]. Transactions of China Electrotechnical Society, 2018, 33(11): 2592-2603.
[18] Airabella A M, Oggier G G, Piris-Botalla L E. Semi- conductors faults analysis in dual active bridge DC-DC converter[J]. IET Power Electronics, 2016, 9(6): 1103-1110.
[19] 胡烽, 孙宏博, 蒋栋, 等. 基于四相全桥的磁悬浮轴承开关器件开路故障容错控制策略[J]. 电工技术学报, 2022, 37(9): 2295-2305, 2340.
Hu Feng, Sun Hongbo, Jiang Dong, et al.Fault- tolerant strategy of four-phase full-leg for active magnetic bearing in case of open circuit fault of switching device[J]. Transactions of China Electro- technical Society, 2022, 37(9): 2295-2305, 2340.
[20] Chen Mingyun, He Yigang.Open-circuit fault diagnosis method in NPC rectifiers using fault-assumed strategy[J]. IEEE Transactions on Power Electronics, 2022, 37(11): 13668-13683.
[21] Zhao Hongshan, Cheng Liangliang.Open-switch fault-diagnostic method for back-to-back converters of a doubly fed wind power generation system[J]. IEEE Transactions on Power Electronics, 2018, 33(4): 3452-3461.
[22] 桑子夏, 郑旭, 方仍存, 等. 基于综合能源系统的固态变压器中开关器件故障特性分析与诊断[J]. 电工技术学报, 2021, 36(增刊1): 231-240.
Sang Zixia, Zheng Xu, Fang Rengcun, et al.Fault characteristics and diagnosis strategy analysis of power switch failures on solid state transformer in integrated energy system[J]. Transactions of China Electrotechnical Society, 2021, 36(S1): 231-240.
[23] 刘座辰, 林磊, 殷天翔, 等. 一种模块化多电平换流器子模块开路故障的快速检测与诊断方法[J]. 电工技术学报, 2022, 37(19): 4883-4894.
Liu Zuochen, Lin Lei, Yin Tianxiang, et al.A fast open-circuit fault detection and diagnosis method for sub-modules of modular multilevel converters[J]. Transactions of China Electrotechnical Society, 2022, 37(19): 4883-4894.
[24] 孙德博, 胡艳芳, 牛峰, 等. 开关磁阻电机调速系统故障诊断和容错控制方法研究现状及展望[J]. 电工技术学报, 2022, 37(9): 2211-2229.
Sun Debo, Hu Yanfang, Niu Feng, et al.Status and prospect of fault diagnosis and tolerant control methods for switched reluctance motor drive system[J]. Transactions of China Electrotechnical Society, 2022, 37(9): 2211-2229.
[25] Nie Songsong, Chen Yu, Pei Xuejun, et al.A DSP- based diagnostic system for DC-DC converters using the shape of voltage across the magnetic com- ponents[C]//2010 IEEE Energy Conversion Congress and Exposition, Atlanta, GA, USA, 2010: 1908-1915.
[26] Ribeiro E, Cardoso A J M, Boccaletti C. Open-circuit fault diagnosis in interleaved DC-DC converters[J]. IEEE Transactions on Power Electronics, 2014, 29(6): 3091-3102.
[27] Shahbazi M, Jamshidpour E, Poure P, et al.Open- and short-circuit switch fault diagnosis for nonisolated DC-DC converters using field programmable gate array[J]. IEEE Transactions on Industrial Electronics, 2013, 60(9): 4136-4146.
[28] Givi H, Farjah E, Ghanbari T.Switch and diode fault diagnosis in nonisolated DC-DC converters using diode voltage signature[J]. IEEE Transactions on Industrial Electronics, 2018, 65(2): 1606-1615.
[29] Cheng Shu, Li Wei, Dong Rongjun, et al.Fault diagnosis and fault-tolerant control scheme for open- circuit faults in three-stepped bridge converters[J]. IEEE Transactions on Power Electronics, 2017, 32(3): 2203-2214.
[30] Shi Haochen, Wen Huiqing, Chen Guipeng, et al.Multiple-fault-tolerant dual active bridge converter for DC distribution system[J]. IEEE Transactions on Power Electronics, 2022, 37(2): 1748-1760.
[31] 孙冠群, 尹项根, 赖锦木, 等. 模块化多电平直流变压器容错控制策略[J]. 电工技术学报, 2022, 37(增刊1): 246-256.
Sun Guanqun, Yin Xianggen, Lai Jinmu, et al.Fault-tolerant control strategy of modular multilevel DC transformer[J]. Transactions of China Electro- technical Society, 2022, 37(S1): 246-256.
[32] 赵楠, 郑泽东, 刘建伟, 等. 级联H桥变换器IGBT开路故障分析与冗余方法研究[J]. 电工技术学报, 2023, 38(6): 1608-1619.
Zhao Nan, Zheng Zedong, Liu Jianwei, et al.IGBT open-circuit fault analysis and fault-tolerant method for cascaded H-bridge converter[J]. Transactions of China Electrotechnical Society, 2023, 38(6): 1608-1619.
[33] Gao Zhiwei, Cecati C, Ding S X.A survey of fault diagnosis and fault-tolerant techniques-part I: fault diagnosis with model-based and signal-based app- roaches[J]. IEEE Transactions on Industrial Elec- tronics, 2015, 62(6): 3757-3767.
[34] 束洪春, 邵宗学, 江耀曦, 等. 具备闭锁和非闭锁模式抑制直流故障电流的新型模块化多电平变换器拓扑[J]. 电工技术学报, 2022, 37(21): 5526-5540.
Shu Hongchun, Shao Zongxue, Jiang Yaoxi, et al.A new modular multilevel converter topology with capability of DC faults clearing under blocking and non-blocking mode[J]. Transactions of China Elec- trotechnical Society, 2022, 37(21): 5526-5540.
[35] Liu Jianqiang, Zhao Nan.Improved fault-tolerant method and control strategy based on reverse charging for the power electronic traction trans- former[J]. IEEE Transactions on Industrial Elec- tronics, 2018, 65(3): 2672-2682.
[36] Park K, Chen Zhe.Open-circuit fault detection and tolerant operation for a parallel-connected SAB DC-DC converter[C]//2014 IEEE Applied Power Electronics Conference and Exposition-APEC 2014, Fort Worth, TX, USA, 2014: 1966-1972.
[37] Song Wenchao, Huang A Q.Fault-tolerant design and control strategy for cascaded H-bridge multilevel converter-based STATCOM[J]. IEEE Transactions on Industrial Electronics, 2010, 57(8): 2700-2708.
[38] Zhao Nan, Liu Jianqiang, Shi Yunming, et al.Mode analysis and fault-tolerant method of open-circuit fault for a dual active-bridge DC-DC converter[J]. IEEE Transactions on Industrial Electronics, 2020, 67(8): 6916-6926.
[39] Pei Xuejun, Nie Songsong, Chen Yu, et al.Open- circuit fault diagnosis and fault-tolerant strategies for full-bridge DC-DC converters[J]. IEEE Transactions on Power Electronics, 2012, 27(5): 2550-2565.