电磁超声加载方式对Lamb波模态的影响

doi:10.19595/j.cnki.1000-6753.tces.171330

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (26588 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Lamb waves are widely used in the field of nondestructive testing with the advantage of better directivity, higher detection efficiency and longer propagation distance etc. But there are always two or more modes existing at any frequency when Lamb waves are generated, and the propagation velocity of each mode is different, which makes the received echoes very complex, so the defect is difficult to be distinguished by analyzing the defect echoes. In this paper, based on multimode characteristics of lamb waves, the influence of electromagnetic acoustic excitation way on the lamb wave mode is researched, and lamb wave-mode control is achieved by choosing the loading way of electromagnetic acoustic transducer (EMAT), which improves excitation efficiency of corresponding Lamb wave-mode and restrains other modes, thereby reducing the difficulty of the subsequent signal processing, and providing useful information for identifying and locating defects in actual detection.

Key words： Lamb wave loading way mode control electromagnetic acoustic transducer

Received: 18 September 2017 Published: 15 October 2018

PACS:

TM15

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liu Suzhen
	Dong Shuo
	Zhang Chuang
	Jin Liang
	Yang Qingxin

Cite this article:

Liu Suzhen,Dong Shuo,Zhang Chuang等. The Influence of Electromagnetic Acoustic Transducer Loading Way on the Mode of Lamb Wave[J]. Transactions of China Electrotechnical Society, 2018, 33(19): 4426-4433.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.171330 OR https://dgjsxb.ces-transaction.com/EN/Y2018/V33/I19/4426

[1] Giurgiutiu V.Tuned Lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring[J]. Journal of Intelligent Material Systems and Structures, 2005, 16(4): 291-305.
[2] 杨理践, 邹金津, 邢燕好. 电磁超声兰姆波在铝板传播中的模态识别[J]. 仪器仪表学报, 2014, 35(4): 909-916.Yang Lijian, Zou Jinjin, Xing Yanhao. Modal identification of electromagnetic ultrasonic Lamb wave propagation in aluminum plate[J]. Chinese Journal of Scientific Instrument, 2014, 35(4): 909-916.
[3] 魏争, 黄松岭, 王珅, 等. 基于全向EMAT的金属板缺陷Lamb波层析成像方法[J]. 清华大学学报(自然科学版), 2014, 54(12): 1609-1614.Wei Zheng, Huang Songling, Wang Kun, et al. Lamb wave tomography method to identify metallic plate defects based on omni-directional EMAT[J]. Journal of Tsinghua University (Science and Technology), 2014, 54(12): 1609-1614.
[4] 刘素贞, 张严伟, 张闯, 等. 电磁超声管道周向兰姆波仿真分析及缺陷检测特性研究[J]. 电工技术学报, 2017, 32(22): 266-273.Liu Suzhen, Zhang Yanwei, Zhang Chuang, et al. Research on simulation analysis of electromagnetic ultrasonic circumferential Lamb waves and defect feature detection in pipeline[J]. Transactions of China Electrotechnical Society, 2017, 32(22): 266-273.
[5] Ribichini R, Nagy P B, Ogi H.The impact of magnetostriction on the transduction of normal bias field EMATs[J]. NDT&E International, 2012,51: 8-15.
[6] 刘素贞, 李丽滨, 蔡智超, 等. 电磁超声检测系统中消除电磁干扰电路的设计[J]. 电工技术学报, 2016, 31(1): 80-84.Liu Suzhen, Li Libin, Cai Zhichao, et al. The design for electromagnetic interference eliminating circuits in electromagnetic ultrasonic testing systems[J]. Transactions of China Electrotechnical Society, 2016, 31(1): 80-84.
[7] 刘素贞, 王晨光, 张闯, 等. 电磁超声扫描装置及其控制系统的设计[J]. 电工技术学报, 2015, 30(10): 20-25.Liu Suzhen, Wang Chenguang, Zhang Chuang, et al. Design of electromagnetic ultrasonic scanning device and its control system[J]. Transactions of China Electrotechnical Society, 2015, 30(10): 20-25.
[8] 周正干, 冯海伟. 超声导波检测技术的研究进展[J]. 无损检测, 2006, 28(2): 57-63.Zhou Zhenggan, Feng Haiwei. Progress in research of ultrasonic guided wave testing technique[J]. NDT, 2006, 28(2): 57-63.
[9] Li J, Rose J L.Implementing guided wave mode control by use of a phased transducer array[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2001, 48(3): 761-768.
[10] Kim Y H, Kim D H, Han J H, et al.Damage assessment in layered composites using spectral analysis and Lamb wave[J]. Composites Part B: Engineering, 2007, 38(7): 800-809.
[11] Wang X, Lu Y, Tang J.Damage detection using piezoelectric transducers and the Lamb wave approach-1 system analysis[J]. Smart Materials and Structures, 2008, 17(2): 25-33.
[12] Zhai Guofu, Jiang Tao, Kang Lei, et al.Minimizing influence of multi-modes and dispersion of electromagnetic ultrasonic Lamb waves[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2010, 57(12): 2725-2733.
[13] Seher M, Huthwaite P, Lowe M, et al.Numerical design optimization of an EMAT for A₀ Lamb wave generation in steel plates[C]//40th Annual Review of Progress in Quantitative Nondestructive Evaluation, QNDE 2013, Baltimore, MD, 2014.
[14] Huang Songling, Wei Zheng, Zhao Wei, et al.A new omni-directional EMAT for ultrasonic Lamb wave tomography imaging of metallic plate defects[J]. Sensors, 2014, 14(2): 3458-3476.
[15] 李明亮, 邓明晰, 高广健. 电磁超声换能器激发超声兰姆波的模式展开分析[J]. 声学学报, 2014, 39(3): 385-391.Li Mingliang, Deng Mingxi, Gao Guangjian. Modal expansion analyses of ultrasonic Lamb waves generated by electromagnetic ultrasonic transducers[J]. Acta Acustica, 2014, 39(3): 385-391.
[16] Nagy P B, Simonetti F, Instanes G.Corrosion and erosion monitoring in plates and pipes using constant group velocity Lamb wave inspection[J]. Ultrasonics, 2014, 54(7): 1832-1841.
[17] Lee J K, Kim Y Y.Tuned double-coil EMATs for omnidirectional symmetric mode lamb wave generation[J]. NDT & E International, 2016, 83: 38-47.