Abstract：The split ratio is a significant parameter which affects the torque and efficiency of permanent magnet synchronous machines (PMSM). This paper proposes a split ratio optimization model for PMSM considering winding temperature limitation. The typical thermal constraints of the split ratio optimization are the fixed maximum copper loss and current density allowed. However, as the heat conductivity of the machine changes with the split ratio due to the variable dimensions of the slots, teeth and yoke, the typical thermal constraints are difficult to limit the winding temperature at the same level. To solve this problem, the winding temperature limitation was taken as the thermal constraint directly in this paper based on the thermal resistance network (TRN). To improve thermal analytical accuracy, the thermal resistance classification according to the heat source type was proposed. The effectiveness of the proposed optimization model is verified by finite element analysis (FEA) and experiment of a 5 kW prototype machine
张新彤, 张成明, 李立毅, 曹继伟, 王凯思源. 基于绕组温度约束的永磁同步电机裂比优化方法[J]. 电工技术学报, 2019, 34(9): 1886-1899.
Zhang Xintong, Zhang Chengming, Li Liyi, Cao Jiwei, Wang Kaisiyuan. Split Ratio Optimization for Permanent Magnet Synchronous Machines Considering Winding Temperature Limitation. Transactions of China Electrotechnical Society, 2019, 34(9): 1886-1899.
[1] Zhu Z Q, Howe D. Electrical machines and drives for electric, hybrid, and fuel cell vehicles[J]. Proceedings of the IEEE, 2007, 95(4): 746-765. [2] Han Jianqun, Zheng Ping. A simplified direct torque control method of PMSM applied in electric vehicles[J]. Transactions of China Electrotechnical Society, 2009, 24(1): 76-80. (in Chinese) [3] Wang Xiaoyuan, Gao Peng, Zhao Yushuang. Key technology of high power density motors in electric vehicles[J]. Transactions of China Electrotechnical society, 2015, 30(6): 53-59. (in Chinese) [4] Guan Weiya, Wu Feng, Ju Ping. Simulation and optimized control of direct-drive permanent magnet wind power system[J]. Power System Protection and Control, 2014, 42(9): 54-60. (in Chinese) [5] Hu Weihao, Wang Yue, Li Mingxuan, et al. Research on sensorless control strategy of direct drive multi-phase PMSG wind power generation system based on MRAS[J]. Power System Protection and Control, 2014, 42(23): 118-124. (in Chinese) [6] Zhang Fan, Yu Zhongjun, Wang Dong, et al. Simulation analysis of 3D thermal field in the stator of motor with forced evaporative cooling system[J]. Transactions of China Electrotechnical Society, 2015, 30(14): 80-85. [7] Li Haodong, Klontz K W, Ferrell V E, et al. Thermal models and electrical machine performance improvement using encapsulation material[J]. IEEE Transactions on Industry Applications, 2017, 53(2): 1063-1069. [8] Tong Wenming, Sun Jingyang, Cheng Xuebin, et al. Thermal conductivity measurement of amorphous alloy laminated core and thermal analysis of amorphous alloy motor[J]. Transactions of China Electrotechnical Society, 2017, 32(15): 42-49. (in Chinese) [9] Li Liyi, Zhang Jiangpeng, Zhao Guoping, et al. Research on the high overload permanent magnet synchronous motor considering extreme thermal load[J]. Proceedings of the CSEE, 2016, 36(3): 845-852. (in Chinese) [10] Reichert T, Nussbaumer T, Kolar J W. Split ratio optimization for high-torque PM motors considering global and local thermal limitations[J]. IEEE Transactions on Energy Conversion, 2013, 28(3): 493-501. [11] Chaaban F B. Determination of the optimum rotor/stator diameter ratio of permanent magnet machines[J]. Electric Machines and Power Systems, 1994, 22(4): 521-531. [12] Ede J D, Zhu Z Q, Howe D, et al. Optimal split ratio for high-speed permanent magnet brushless DC motors[C]// Proceedings of the Fifth International Conference on Electrical Machines and Systems, Shenyang, 2001: 909-912. [13] Pang Y, Zhu Z Q, Howe D. Analytical determination of optimal split ratio for permanent magnet brushless motors[J]. IEE Proceedings-Electric Power Applications, 2006, 153(1): 7-13. [14] Wu Lijian, Zhu Z Q, Chen J T, et al. Optimal split ratio in fractional-slot interior permanent-magnet machines with non-overlapping windings[J]. IEEE Transactions on Magnetics, 2010, 46(5): 1235-1242. [15] Shen Yang, Zhu Z Q. Analytical prediction of optimal split ratio for fractional-slot external rotor PM brushless machines[J]. IEEE Transactions on Magnetics, 2011, 47(10): 4187-4190. [16] Li Quanwu, Dou Manfeng, Fang Chun. Analytical determination of optimal split ratio for high-speed permanent magnet brushless motors[C]//2015 18th International Conference on Electrical Machines and Systems, Pattaya, Thailand, 2015: 636-640. [17] Wang Yubin, Cheng Ming, Hua Weri, et al. Analysis and optimization of split ratio for double-stator permanent magnet brushless machine[J]. Proceedings of the CSEE, 2010, 30(30): 62-67. (in Chinese) [18] Li Quanwu, Dou Manfeng. Split ratio optimization method for dual-redundancy brushless DC motors considering thermal limitations[J]. Transactions of China Electrotechnical Society, 2015, 30(22): 19-26. (in Chinese) [19] Yu Chen, Qu Ronghai, Wei Xu, et al. Analytical determination of optimal split ratio for interior permanent magnet synchronous motor[C]//2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific, Beijing, 2014: 1-5. [20] Fan Xinggang, Qu Ronghai, Zhang Bin, et al. Split ratio optimization of high-speed permanent magnet synchronous machines based on thermal resistance network[C]//2016 XXII International Conference on Electrical Machines, Lausanne, Switzerland, 2016: 2059-2065. [21] Li Weili, Li Shoufa, Xie Ying, et al. Stator-rotor coupled thermal field numerical calculation of induction motors and correlated factors sensitivity analysis[J]. Proceedings of the CSEE, 2007, 27(24): 85-91. (in Chinese) [22] Cao Junci, Li Weili, Cheng Shukang, et al. Temperature field calculation and associated factor analysis of induction motor with compound cage rotor[J]. Proceedings of the CSEE, 2008, 28(30): 96-103. (in Chinese) [23] Tai Yong, Liu Zhaomiao. Analysis on three-dimensional transient temperature field of induction motor[J]. Proceedings of the CSEE, 2010, 30(30): 114-120. (in Chinese) [24] Michael G, Chris G, Tsarafidy R, et al. A thermal improvement technique for the phase windings of electrical machines[J]. IEEE Transactions on Industry Applications, 2012, 48(1): 79-87. [25] Li Liyi, Zhang Jiangpeng, Zhang Chengming, et al. Research on electromagnetic and thermal issue of high-efficiency and high-power-density outer-rotor motor[J]. IEEE Transactions on Applied Superconductivity, 2016, 26(4): 1-5. [26] Guo Youguang, Zhu Jianguo, Lu Haiyan, et al. Core Loss calculation for soft magnetic composite electrical machines[J]. IEEE Transactions on Magnetics, 2012, 48(11): 3112-3115. [27] Mellor P H, Roberts D, Turner D R. Lumped parameter thermal model for electrical machines of TEFC design[J]. IEE Proceedings B-Electric Power Applications, 1991, 138(5): 205-218. [28] Idoughi L, Mininger X, Bouillault F, et al. Thermal model with winding homogenization and FIT discretization for stator slot[J]. IEEE Transactions on Magnetics, 2011, 47(12): 4822-4826. [29] Zhang Jianzhong, Jiang Yongjiang. Thermal analysis of constant frequency double rotor permanent magnet generator based on equivalent thermal network method[J]. Transactions of China Electrotechnical Society, 2015, 30(2): 87-97. (in Chinese) [30] Dave S, Aldo B, Andrea C. Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors[J]. IEEE Transactions on Energy Conversion, 2005, 20(3): 620-628. [31] Janne N, Marko R, Juha P. Thermal analysis of radial-flux electrical machines with a high power density[J]. IEEE Transactions on Industrial Electronics, 2008, 55(10): 3543-3554. [32] David G, Abdeslam M, Neil L B, et al. Design aspects of high-speed high-power-density laminated-rotor induction machines[J]. IEEE Transactions on Industrial Electronics, 2011, 58(9): 4039-4047. [33] Wang Xiaoyuan, Gao Peng. Application of equivalent thermal network method and finite element method in temperature calculation of in-wheel motor[J]. Transactions of China Electrotechnical Society, 2016, 31(16): 26-33. (in Chinese)
2019, Vol. 34 
