MCM-41 Surface Modification and Trap Characteristic of MCM-41/EP Composites
Luo Pan1,2, Xu Man1, Wang Shaohui1, 3, Li Peng2, Zhang Yihan2, Xu Yang1, Xie Darong1
1. State Key Laboratory of Electrical Insulation and Power Equipment Xi’an Jiaotong University Xi’an 710049 China; 2. State Grid Henan Economic Research Institute Zhengzhou 450052 China; 3. Northwest Electric Power Design Institute Co. Ltd China Power Engineering Consulting Group Xi’an 710045 China;
Abstract:In this paper, the MCM-41 was surface modified by the silane coupling agent KH550 before the preparation of MCM-41/EP nano-composite. Moreover, the thermogravimetric analysis, Fourier transform infrared spectroscopy, small angle X-ray diffraction and N2 adsorption-desorption isotherms were used to characterize the surface structure of MCM-41 before and after surface modification. The in-situ polymerization was employed to prepare the MCM-41/EP Nano-composite with different percentages of MCM-41. Then, the glass transition temperature of MCM-41/EP composite was measured by using the dynamic mechanical analyzer. The results showed that the glass transition temperature of MCM-41/EP composite increased with the increase of MCM-41 percentage. Finally, the trap parameter of the composite was measured by the thermally stimulated depolarization current. It was shown that, with the increase of MCM-41, the trap depth became shallow, and the quantity of trapped charge decreased significantly.
[1] 张代东, 吴润. 材料科学基础[M]. 北京: 北京大学出版社, 2011. [2] 巫松桢, 谢大荣. 电气绝缘材料科学与工程[M]. 西安: 西安交通大学出版社, 1996. [3] 张明艳, 王晨, 吴淑龙, 等. 碳纳米管、蒙脱土共掺杂环氧树脂复合材料介电性能研究[J]. 电工技术学报, 2016, 31(10): 151-158. Zhang Mingyan, Wang Chen, Wu Shulong, et al.Research on dielectric properties of epoxy resin composites doped with carbon nanotubes and montmorillonite[J]. Transactions of China Elec- trotechnical Society, 2016, 31(10): 151-158. [4] 王旗, 李喆, 尹毅, 等. 微/纳米氧化铝/环氧树脂复合材料抑制电树枝生长能力的研究[J]. 电工技术学报, 2015, 30(6): 255-260. Wang Qi, Li Zhe, Yin Yi, et al.The effect of micro and nano alumina on the ability of impedance on the electrical tree of epoxy resin[J]. Transactions of China Electrotechnical Society, 2015, 30(6): 255-260. [5] Li S T, Yin G L, Bai S N, et al.A new potential barrier model in epoxy resin nanodielectrics[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2011, 18(5): 1535-1543. [6] Lewis T J.Interfaces are the dominant feature of dielectrics at the nanometric level[J]. IEEE Transa- ctions on Dielectrics and Electrical Insulation, 2004, 11(5): 739-753. [7] Tanaka T, Kozako M, Fuse N, et al.Proposal of a multi-core model for polymer nanocomposite dielectrics[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2005, 12(4): 669-681. [8] Tanaka T, Montanari G C, Mulhaupt R.Polymer nanocomposites as dielectrics and electrical insulation- perspectives for processing technologies, material characterization and future applications[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2004, 11(5): 763-784. [9] Lau K, Vaughan A, Chen G.Nanodielectrics: opportunities and challenges[J]. IEEE Electrical Insulation Magazine, 2015, 31(4): 45-54. [10] Tanaka T, Imai T.Advances in nanodielectric materials over the past 50 years[J]. IEEE Electrical Insulation Magazine, 2013, 29(1): 10-23. [11] Cherney E A.Nanodielectrics applications-today and tomorrow[J]. IEEE Electrical Insulation Magazine, 2013, 29(6):59-65. [12] 赵东元, 万颍, 周午纵. 有序介孔分子筛材料[M]. 北京: 高等教育出版社, 2013. [13] 焦剑, 张佳赟. 环氧树脂/介孔SiO2复合材料的结构与性能[J]. 中国塑料, 2008, 22(9): 57-62. Jiao Jian, Zhang Jiayun.Textural properties of epoxy resin/mesostructured silica mesocomposites[J]. China Plastics, 2008, 22(9): 57-62. [14] 王娜, 张静, 戴彩云, 等. 环氧树脂/纳米介孔分子筛复合材料的制备及性能研究[J]. 工程塑料应用, 2006, 34(5): 15-18. Wang Na, Zhang Jing, Dai Caiyun, et al.Preparation and property of epoxy resin nano-sized mesoporous molecular sieve nanocomposite[J]. Composite Science and Technology, 2006, 34(5): 15-18. [15] 张莉莉, 黄思共, 李湘祁. 介孔MCM-48粉体对环氧树脂性能影响[J]. 热固性树脂, 2009, 24(6): 41-43. Zhang Lili, Huang Sigong, Li Xiangqi.Effect of mesoporous MCM-48 on mechanical and dielectric properties of epoxy resin[J]. Thermosetting Resin, 2009, 24(6): 41-43. [16] 曹均助, 苏跃增, 周持兴. 介孔材料SBA-15/环氧树脂复合材料的制备和固化动力学[J]. 高分子材料科学与工程, 2011, 27(11): 133-136. Cao Junzhu, Su Yuezeng, Zhou Chixing.Synthesis of mesoporous material SBA-15/Epoxy composite and cure Kinetics[J]. Polymer Materials Science and Engineering, 2011, 27(11): 133-136. [17] Lin J, Wang X.Preparation, microstructure, and properties of novel low-κ brominated epoxy/meso- porous silica composites[J]. European Polymer Journal, 2008, 44(5): 1414-1427. [18] Han B, Wang X, Sun Z, et al.Space charge suppression induced by deep traps in polyethylene/ zeolite nanocomposite[J]. Applied Physics Letters, 2013, 102(1): 012902-012904. [19] Friedman H L.Kinetics of thermal degradation of charforming plastics from thermogravimetry app- lication to a phenolic plastic[J]. Journal of Polymer Science Part C: Polymer Symposia, 1964, 6(1): 183-195. [20] 马晶. SBA-15(16)介孔分子筛的功能化修饰及其在多项催化中的应用[D]. 哈尔滨: 哈尔滨工业大学, 2011. [21] 曹均助. 环氧树脂和介孔SBA-15复合材料制备和固化动力学的研究[D]. 上海: 上海交通大学, 2011. [22] Baerlocher C, Mccusker L B.Practical aspects power diffraction data-analysis[J]. Studies in Surface Science & Catalysis, 1994, 85: 391-428. [23] Yuanxin Zhou, Farhana Pervi, Lance Lewis.Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube-reinforced epoxy[J]. Materials Science and Engineering: A, 2007, 452: 657-664. [24] Tao Xie, Ingrid A.Rousseau, Facile tailoring of thermal transition temperatures of epoxy shape memory polymers[J]. Polymer, 2009, 50(8): 1852-1856. [25] Starr F W, Schrøder T B, Glotzer S C. Effects of a nanoscopic filler on the structure and dynamics of a simulated polymer melt and the relationship to ultra-thin films[J]. Physical Review E, 2001, 64(2): 021802(1-5). [26] 王力衡. 介质的热刺激电流理论及其应用[M]. 北京: 科学出版社, 1988. [27] 田付强, 卜文斌, 杨春, 等. TSC测量技术中存在的若干问题的探讨[J]. 电工技术学报, 2010, 25(11): 21-28. Tian Fuqiang, Bu Wenbin, Yang Chun, et al.Investigation of existing problems in thermally stimulated current measurement technique[J]. Transa- ctions of China Electrotechnical Society, 2010, 25(11): 21-28. [28] 王暄, 赵晓旭, 雷清泉, 等. 复合热激电流曲线陷阱参数的计算[J]. 电工技术学报, 2000, 15(4): 84-87. Wang Xuan, Zhao Xiaoxu, Lei Qingquan, et al.Calculation of the trapping parameters of composite thermally stimulated current curve[J]. Transactions of China Electrotechnical Society, 2000, 15(4): 84-87.