Abstract：Induction heating technology is used in the edge of intermediate billets to compensate the temperature drop of intermediate billets during the hot rolling cooling, thereby improving the quality of the rolling and the yield. In this paper, a C-type hot rolled strip edge heating model is developed to calculate the eddy current and temperature fields. The factors that influence the eddy current and temperature fields in steel billets are also analyzed.
李宜伦, 王泽济, 杨仕友. 热轧带钢厂边部加热涡流-温度场仿真分析[J]. 电工技术学报, 2013, 28(2增): 105-110.
Li Yilun, Wang Zeji, Yang Shiyou. Numerical Simulation of the Eddy Current and Temperature Fields in the Edge Heating Hot Strip Mill. Transactions of China Electrotechnical Society, 2013, 28(2增): 105-110.
[1] Hellegouarc’h J, Prost G, Ruer J. Revue de Metallurgle Juillet-Aout, 1989: 593-602. [2] Fukushima S, Okamura K, Kase T, et al. A high-performance edge heater for the hot strip mill[J]. IEEE Transactions on Industr. Applic., 1993, 29(5): 854-858. [3] 刘庄. 热处理过程的数值模拟[M]. 北京: 科学出版社, 1996. [4] 李伟力, 孙佳慧, 孙宏丽. 汽轮发电机稳态与负序工况下转子涡流损耗计算和温度场分析[J]. 电工技术学报, 2012, 27(9): 174-182. [5]Li Weili, Sun Jiahui, Sun Hongli. Calculation and analysis of eddy loss and temperature field in rotor of synchronous generator under steady state and negative sequence[J]. Transactions of China Electrotechnical Society, 2012, 27(9): 174-182. [6] 路义萍, 阴文豪, 韩家德, 等．汽轮发电机转子端部及槽内绕组温升[J]. 电工技术学报, 2010, 25(2): 1-5. [7]Lu Yiping, Yin Wenhao, et al. Winding temperature rise of rotor end and inner slot of turbo generator[J]. Transactions of China Electrotechnical Society, 2010, 25(2): 1-5. [8] 王雪, 王增平. 基于有限元法的变压器电感参数计算方法的研究[J]. 电力系统保护与控制, 2009, 37(24): 11-14. [9]Wang Xue, Wang Zengping. An investigation on transformer inductance calculation based on finite element method[J]. Power System Protection and Control, 2009, 37(24): 11-14. [10] 罗涛, 陈民铀, 曾灿. 电力电缆安全监测中温度场和电场数值关系分析[J]. 电力系统保护与控制, 2010, 38(5): 20-24. [11]Luo Tao, Chen Minyou, Zeng Can. Study of numerical relationship between temperature and electric field in power cables safety monitoring[J]. Power System Protection and Control, 2010, 38(5): 20-24. [12] 倪光正, 杨仕友. 工程电磁场数值计算[M]. 北京: 机械工业出版社, 2004. [13] 谢德馨, 姚缨英. 三维涡流场的有限元分析[M]. 北京: 机械工业出版社, 2001. [14] 路义萍, 陈朋飞, 邓海燕, 等. 某新型通风方式空冷汽轮发电机转子三维温度场[J]. 电工技术学报, 2010, 25(11): 29-35. [15]Lu Yiping, Chen Pengfei, Deng Heiyan, et al Temperature field of one air-cooled turbo-generator rotor with new ventilation type[J]. Transactions of China Electrotechnical Society, 2010, 25(11): 29-35. [16] 罗建锋, 唐轶, 陈奎, 等. 基于发热-散热积累模型的电动机过载保护研究[J]. 电力系统保护与控制, 2010, 38(3): 95-98. [17]Luo Jianfeng, Tang Yi, chen Kui, et al. Study on motor over-load protection based on heat accumulation-emission model[J]. Power System Protection and Control, 2010, 38(3): 95-98. [18] 帅克刚. 高频感应加热弯板成型温度场的有限元分析[J]. 锅炉技术, 2004, 35(3): 52-54. [19]Shuai Kegang. FME analysis of the temperature field of high frequency induction heating in plate bend modeling[J]. Boiler Technology, 2004, 35(3): 52-54. [20] 徐祖耀. 相变原理[M]. 北京: 机械工业出版社, 1998 .
2013, Vol. 28 
