Finite Element Calculation of Radial Electromagnetic Force Wave in Squirrel-Cage Asynchronous Motors
Wang Xun1, 2, Qiu Arui2
1.Beijing Mechanical Equipment Institute Beijing 100854 China 2.State Key Laboratory of Security Control and Simulation of Power Systems and Large Scale Generation Equipments Tsinghua University Beijing 100084 China
Abstract：In this paper, the field-circuit coupled time-stepping finite element model of squirrel-cage asynchronous motor is presented and the validity is verified by means of the comparison between the stator phase current harmonics of the simulating wave and those of the experiment wave. Air gap flux density is calculated by means of this model and radial electromagnetic force is calculated using the classical Maxwell stress tensor method. Air gap flux density and radial electromagnetic force vary in both space domain and time domain and two dimensional Fourier analysis are carried out to calculate harmonics of those. The influence of the tooth and slot and the slip on flux density and radial electromagnetic force are discussed. The relationship of flux density waves and radial electromagnetic force waves are analyzed. Radial electromagnetic force waves and the testing electromagnetic noise spectra are analyzed and compared and the results verify the effectiveness of the calculation of radial electromagnetic force waves. Radial electromagnetic force and its harmonics calculated by the method can be used to electromagnetic noise analysis in the design stage.
王荀, 邱阿瑞. 笼型异步电动机径向电磁力波的有限元计算[J]. 电工技术学报, 2012, 27(7): 109-117.
Wang Xun, Qiu Arui. Finite Element Calculation of Radial Electromagnetic Force Wave in Squirrel-Cage Asynchronous Motors. Transactions of China Electrotechnical Society, 2012, 27(7): 109-117.
[1] 汤蕴璆. 电机内的电磁场[M]. 北京: 科学出版社, 1998. [2] Heller B, Hamata V. Harmonic fields effects in induction machines[M]. New York: Elsevier Press, 1977. [3] Yang S J. Low noise electrical motors[M]. Oxford: Clarendon Press, 1981. [4] Verma S P, Balan A. Determination of radial-forces in relation to noise and vibration problems of squirrel- cage induction motors[J]. IEEE Transations on Energy Conversion, 1994, 9(2): 404-412. [5] Besnerais J Le, Lanfranchi V, Hecquet M, et al. Characterisation of radial vibration force and vibration behaviour of a pulse-width modulation-fed fractional-slot induction machine[J]. IET Electric Power Applications, 2009, 3(3): 197-208. [6] Ramesohl I, Kuppers S, Hadrys W, et al. Three dimensional calculation of magnetic forces and displacements of a clawpole generator[J]. IEEE Transations on Magnetics, 1996, 32(3): 1685-1688. [7] Zhang J J, Wang L L, Zhang H J, et al. Non-linear radial force simulation of switched reluctance motors based on finite element model[C]. IEEE Inter. Conf. on Robotics and Biomimetics, 2009: 21-26. [8] Zhu Z Q, Xia Z P, Wu L J, et al. Analytical modelling and finite element computation of radial vibration force in fractional-slot permanent magnet brushless machines[C]. Inter. Conf. on Electric Machines and Drives, 2009: 144-151. [9] Schlensok C, Henneberger G. Calculation of force excitations in induction machines with centric and excentric positioned rotor using 2-d transient FEM[J]. IEEE Transations on Magnetics, 2004, 40(2): 782-785. [10] Martinez Munoz D, Lai J C S. Acoustic noise prediction in a vector controlled induction machine [C]. IEEE Inter. Conf. on Electric Machines and Drives, 2003, 1: 104-110. [11] 胡敏强, 黄学良. 电机运行性能数值计算方法及其应用[M]. 南京: 东南大学出版社, 2003.
2012, Vol. 27 
