Abstract：High speed current limiting fuse is widely commercially applied in current limiting technique. The isolator of high speed current limiting fuse utilizes the detonate explode to interrupt current. However,the detonate has some disadvantages,such as easily decompose,worse heat-resistant,insecurity and more cost. According to the above disadvantages of detonate isolator,the existing current limiting fuse is improving the design and a novel current limiting fuse based on electro-magnetic repulsion isolator which is used as a substitute for detonate isolator to interrupt current is introduced. A DC320V/3kA current limiting fuse prototype is designed and analyzed. The velocity measuring test and temperature rise test of isolator are carried out and the test results show that electro-magnetic repulsion isolator realized the similar characteristics as primary detonate isolator. The results of short-circuit test with prospective peak current 25kA and time constant 4.17ms show that the novel current limiting fuse is feasible and effective.
王晨，庄劲武，袁志方，张超，陈搏，江壮贤. 基于电磁斥力型开断器的限流熔断器设计与实验[J]. 电工技术学报, 2013, 28(7): 66-72.
Wang Chen,Zhuang Jinwu,Yuan Zhifang,Zhang Chao,Chen Bo,Jiang Zhuang. Design and Test of High Speed Current Limiting Fuse Based on Electro-Magnetic Repulsion Type Isolator. Transactions of China Electrotechnical Society, 2013, 28(7): 66-72.
[1] Atmadji S. Direct current hybrid breakers: a design and realization [D]. Eindhoven: Eindhoven University of Technology, 2000. [2] 庄劲武, 张晓锋, 杨锋, 等. 船舶直流电网短路限流装置的设计与分析[J]. 中国电机工程学报, 2005, 25(20): 26-30. Zhuang Jinwu, Zhang Xiaofeng, Yang Feng, et al. Analysis and design of fault current limiter for ship DC power systems[J]. Proceedings of the CSEE, 2005, 25(20): 26-30. [3] Roodenburg B, Taffone A, Gilardi E, et al. Combined ZVS-ZCS topology for high-current direct current hybrid switches: design aspects and first measurements[J]. IET Electr. Power Appl. , 2007, 1(2): 183-192. [4] Hyun OK Bae, Seong Woo Yim, Seung Duck Yu, et al. Long-term operation and fault tests of a 22.9kV hybrid SFCL in the KEPCO test grid[J]. IEEE Transactions on Applied Superconductivity, 21(3), 2011: 2131-2134. [5] 董力, 李庆民, 刘卫东, 等. 两次电流转移型短路电流限制器的研究[J]. 电工技术学报, 2004, 19(3): 21-24. Dong Li, Li Qingmin, Liu Weidong, et al. Investigation of a double current-transferring type short circuit current limiter[J]. Transactions of China Electrotechnical Society, 2004, 19(3): 21-24. [6] 王晨, 庄劲武, 张晓锋, 等. 基于IGBT的新型直流电力系统限流装置的工作原理与实验研究[J]. 电工技术学报, 2006, 21(9): 57-61. Wang Chen, Zhuang Jinwu, Zhang Xiaofeng, et al. Priciple and test of a novel fault current limiter based on IGBT for DC power system[J]. Transactions of China Electrotechnical Society, 2006, 21(9): 57-61. [7] 江道灼, 敖志香, 卢旭日, 等. 短路限流技术的研究与发展[J]. 电力系统及其自动化学报, 2007, 19(3): 8-19. Jiang Daozhuo, Ao Zhixiang, Lu Xuri, et al. Research and development of short-circuit current limiting technology[J]. Proceeding of the CSU-EPSA, 2007, 19(3): 8-19. [8] Benouar M. Pyrotechnique circuit interrupter for the protection of electrical systems[J]. IEEE Trans. on Power Apparatus and Systems, 1984, PAS-103(8): 2006-2010. [9] 王季梅. 高压交流熔断器及其应用[M]. 北京: 机械工业出版社, 2005. [10] Das J C. Limitation of fault-current limiters for expansion of electrical distribution systems[J]. IEEE Trans. on Industry Applications, 1997, 33(4): 1073-1082. [11] ABB. Advertisement of Is-limiter [EB/OL]. http: www. abb. de /calor/, 2006-5-8. [12] 徐向东. 快速限流装置在电力系统中的应用[J]. 高压电器, 2007, 43(4): 295-297. Xu Xiangdong. Application of is-limiter in electrical network[J]. High Voltage Apparatus, 2007, 43(4): 295-297. [13] Herbert M, Acree J, Schaffer J. Development and testing of power assisted current limiting fuses to 600 ampers and 38kV[J]. IEEE Trans. on Power Delivery, 1988, 3(2): 619-626. [14] 戴超, 庄劲武, 杨锋, 等. 大容量爆炸活塞式高速开断器分析与优化设计[J]. 高电压技术. 2011, 37(1): 221-226. Dai Chao, Zhuang Jinwu, Yang Feng, et al. Analysis and optimum design of high-capacity high-speed interrupter[J]. High Voltage Engineering, 2011, 37(1): 221-226. [15] 戴超, 庄劲武, 杨锋, 等. 高压混合型限流熔断器用电弧触发器的弧前特性[J]. 高电压技术, 2010, 36(2): 350-355. Dai Chao, Zhuang Jinwu, Yang Feng, et al. Pre-arcing characteristics of arc trigger for high voltage hybrid current-limiting fuse[J]. High Voltage Engineering, 2010, 36(2): 350-355. [16] 戴超, 庄劲武, 杨锋, 等. 大电流电弧触发式混合限流熔断器分析与设计[J]. 电力自动化设备, 2011, 31(10): 81-85. Dai Chao, Zhuang Jinwu, Yang Feng, et al. Analysis and design of high-current arc-triggering hybrid current-limiting fuse[J]. Electric Power Automation Equipment, 2011, 31(10): 81-85. [17] 李庆民, 刘卫东, 钱家骊, 等. 电磁推力机构的一种分析方法[J]. 电工技术学报, 2004, 19(2): 20-24. Li Qingmin, Liu Weidong, Qian Jiali, et al. Ananalytical method for electromagnetic repulsion mechanism[J]. Transactions of China Electrotechnical Society, 2004, 19(2): 20-24. [18] 王子建, 何俊佳, 尹小根, 等. 基于电磁斥力机构的10kV快速真空开关[J]. 电工技术学报, 2009, 24(11): 68-75. Wang Zijian, He Junjia, Yin Xiaogen, et al. 10kV high speed vacuum switch with electromagnetic repulsion mechanism[J]. Transactions of China Electrotechnical Society, 2009, 24(11): 68-75. [19] 江壮贤, 庄劲武, 王晨, 等. 基于电磁斥力原理的高速触头机构仿真分析与设计[J]. 电工技术学报. 2011, 26(8): 172-177. Jiang Zhuangxian, Zhuang Jinwu, Wang Chen, et al. Simulation analysis and design of a high speed contact mechanism based on electro-magnetic repulsion mechanism[J]. Transactions of China Electrotechnical Society, 2011, 26(8): 172-177.
2013, Vol. 28 
