1. Institute of Electrotechnology Tianwei Group Co.,Baoding 071056 China 2.North China Electric Power University Beijing 102206 China 3. Infolytica Corp. Montreal H2X 4B3 Canada
Abstract：The measurement and 3D finite element analysis of the iron loss,interlinkage flux inside the laminated silicon steel sheets and the magnetic flux densities at the specified positions are carried out based on a verifying silicon steel sheet model. The modeling results show that the leakage flux vertically through the silicon steel sheets has the peculiarity of shin effect,and the eddy current loss caused by the AC leakage flux is a significant component of the total iron loss. The calculated results by means of the software MagNet#x000ae; agree with the measured ones,and show the method presented in this paper is validated.
张俊杰，李琳，刘兰荣，范亚娜，程志光. 进入硅钢叠片内的漏磁通和附加损耗的模拟实验与仿真[J]. 电工技术学报, 2013, 28(5): 148-153.
Zhang Junjie,Li Lin,Liu Lanrong,Fan Yana,B. Forghani,Cheng Zhiguang. Measurement and 3D FEM Analysis of Additional Loss in Laminated Silicon Sheets Caused by Leakage Flux. Transactions of China Electrotechnical Society, 2013, 28(5): 148-153.
[1] 许实璋. 电机学[M]. 北京: 机械工业出版社, 1988. [2] Oszk#x000e1;r B#x000ed;r#x000f3;, Kurt Preis, Igor Ticar. A FEM method for eddy current analysis in laminated media [J]. The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2005, 24(1): 241-248. [3] Hollaus K. Biro O, A FEM formulation to treat 3D eddy currents in laminations[J]. IEEE Transactions on Magnetics, 2000, 36(4): 1289-1292. [4] Nogawa S, Kuwata M, Daisuke Miyagi, et al. Study of eddy-current loss reduction by slit in reactor core [J]. IEEE Transactions on Magnetics, 2005, 41(5): 2024-2027. [5] Nogawa S, Kuwata M, Takaaki Nakau, et al. Study of modeling method of lamination of reactor core [J], IEEE Transactions on Magnetics, 2006, 42(4): 1455-1458. [6] Cheng Zhiguang, Takahashi Norio, Forghani Behzad. TEAM Problem 21 family(V.2009)[EB/OL]. (2010-03-02). [2012-08-07]. http://www.compumag.org/jsite/team.html. [7] Cheng Z, Takahashi N, Forghan B, et al. Analysis and measurements of iron loss and interlinkage flux inside silicon steel lamination[J]. IEEE Transactions on Magnetics, 2009, 45(3): 1222-1225. [8] Cheng Z, Takahashi N, Forghani B, et al. Effect of excitation patterns on both iron loss and flux in solid and laminated steel configurations[J]. IEEE Transactions on Magnetics, 2010, 46(8): 3185-3188. [9] http://www.compumag.org/jside/html. [10] Dedulle J M, Meunier G, Foggia A, et al. Magnetic fields in nonlinear anisotropic grain-oriented iron-sheet [J]. IEEE Transactions on Magnetics, 1990, 26(2): 524-527. [11] Silvester P P, Gupta R P. Effective computational models for anisotropic soft B-H curves [J]. IEEE Transactions on Magnetics, 1991, 27(5): 3804-3807.
2013, Vol. 28 
