基于参考调整轮廓误差的直驱XY运动平台自适应非线性滑模轮廓控制

doi:10.19595/j.cnki.1000-6753.tces.221447

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1839 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The direct drive XY motion platform can realize the movement of multi-axis high-end CNC machine tools in the XY coordinate system. It has the advantages of fast response speed and high machining accuracy, which is the key to achieving precise contour control. However, the direct drive XY motion platform uses two permanent magnet linear synchronous motors as the power source. The nonlinear dynamics in the system will directly affect the motion of the platform without attenuating the transmission links. In addition, the matching and coordination of the two feed drive axes in the motion process will also reduce the contour machining accuracy of the system. The precision direct drive XY motion platform is vulnerable to the influence of the system uncertainty dynamics and the dual axis coordination matching when performing the machining tasks. Therefore, an adaptive nonlinear sliding mode contour control (ANSMCC) method is proposed based on the reference adjusted contour error (RACE) model and uncertainty compensator (UC).
Firstly, the dynamic model of the direct drive XY motion platform is established, including uncertainty factors such as parameter variations, external disturbances, and nonlinear friction forces. Next, the traditional method of regarding the normal component of the tracking error as an approximate contour error is not applicable to the large curvature contour machining path. A RACE model is established to calculate a more accurate contour error using coordinate transformation and equivalent contour error theory. Since the direct drive XY platform servo system will be affected by the nonlinear dynamics in the operation process, the ANSMCC method and UC method are designed to control the linear reference model and the nonlinear dynamics. Based on the designed RACE model, an ANSMCC is designed. The nonlinear sliding mode surface is introduced in ANSMCC to replace the traditional linear sliding mode surface, guaranteeing the system has a fast dynamic response speed while enhancing the contour tracking accuracy. Meanwhile, regarding the uncertain dynamics in the system, the UC method and linear sliding mode controller are designed to reduce the error between the reference model and the actual object and compensate for the influence of uncertain dynamics on the contour accuracy. Finally, three comparative experimental conditions, including no-load low-speed condition, no-load high-speed condition, and load condition, are conducted under the three contour control methods of adaptive sliding mode contour control (ASMCC), and ANSMCC based on RACE and UC. In order to ensure the fairness of the comparison experiments, all parameters in the experiment are repeatedly debugged, and appropriate parameters are selected to meet the dynamic and static performance of the system. The proposed ANSMCC based on the RACE and UC methods can decrease the contour error of the direct drive XY motion platform to -2.5~2.5 μm. Compared with the other two methods, contour tracking accuracy is significantly improved, which can meet the contour machining accuracy requirements in practical applications.
The following conclusions can be drawn from the experimental analysis: (1) Compared with the traditional method of approximating the contour error by the normal component of the tracking error, the RACE model is more suitable for the reference trajectory with large curvature, which is simple and accurate; (2) The ANSMCC method can improve system response speed and contour machining accuracy by introducing a nonlinear sliding surface; (3) UC can compensate for the influence of uncertain dynamics on the system. Thus the direct drive XY motion platform servo system has strong robustness.

Key words： Direct drive XY motion platform reference adjustment contour error uncertainty compensator adaptive nonlinear sliding mode contour control contour machining accuracy

Received: 27 July 2022

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Jin Hongyan
	Gong Yanshu
	Zhao Ximei

Cite this article:

Jin Hongyan,Gong Yanshu,Zhao Ximei. Adaptive Nonlinear Sliding Mode Contour Control for Direct Drive XY Motion Platform Based on Reference Adjustment Contour Error[J]. Transactions of China Electrotechnical Society, 2023, 38(18): 4900-4909.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.221447 OR https://dgjsxb.ces-transaction.com/EN/Y2023/V38/I18/4900

[1] 李争, 安金峰, 肖宇, 等. 基于自适应观测器的永磁同步直线电机模型预测控制系统设计[J]. 电工技术学报, 2021, 36(6): 1190-1200.
Li Zheng, An Jinfeng, Xiao Yu, et al.Design of model predictive control system for permanent magnet synchronous linear motor based on adaptive observer[J]. Transactions of China Electrotechnical Society, 2021, 36(6): 1190-1200.
[2] 苏光靖, 李红梅, 李争, 等. 永磁同步直线电机无模型电流控制[J]. 电工技术学报, 2021, 36(15): 3182-3190.
Su Guangjing, Li Hongmei, Li Zheng, et al.Research on model-free current control of permanent magnet synchronous linear motor[J]. Transactions of China Electrotechnical Society, 2021, 36(15): 3182-3190.
[3] Deng Jie, Liu Yingxiang, Li Kai, et al.Design, modeling, and experimental evaluation of a compact piezoelectric XY platform for large travel range[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2020, 67(4): 863-872.
[4] 李争, 肖宇, 孙鹤旭, 等. 基于速度前瞻的双轴直线电机交叉耦合控制策略[J]. 电工技术学报, 2021, 36(5): 973-983.
Li Zheng, Xiao Yu, Sun Hexu, et al.Speed pro-spective based cross-coupling control strategy for dual-axis linear motor[J]. Transactions of China Elec-trotechnical Society, 2021, 36(5): 973-983.
[5] 原浩, 赵希梅, 杜畅. 基于双边界层滑模观测器的双轴直驱平台迭代学习轮廓控制[J]. 电机与控制学报, 2021, 25(4): 81-87.
Yuan Hao, Zhao Ximei, Du Chang.Iterative learning contouring control for dual axis direct drive platform servo system with dual boundary layer sliding mode observer[J]. Electric Machines and Control, 2021, 25(4): 81-87.
[6] 武志涛, 杨永辉. 直线电机驱动XY平台精密轮廓跟踪控制[J]. 中国电机工程学报, 2018, 38(19): 5863-5868, 5944.
Wu Zhitao, Yang Yonghui.Precise contour tracking control for linear motor drive XY tables[J]. Pro-ceedings of the CSEE, 2018, 38(19): 5863-5868, 5944.
[7] Wang Guirong, Gong Xinman, Li Yingqi.Contour error control of X-Y platform based on nominal model in polar coordinate system[J]. Journal of Physics: Conference Series, 2019, 1187(3): 032051.
[8] 武志涛, 杨永辉. 一种永磁直线电机驱动X-Y平台精密轮廓跟踪控制策略[J]. 电工技术学报, 2018, 33(17): 4037-4043.
Wu Zhitao, Yang Yonghui.A precise contour tracking control method for X-Y table driven by permanent magnet linear motors[J]. Transactions of China Elec-trotechnical Society, 2018, 33(17): 4037-4043.
[9] 武志涛, 朱连成. 基于滑模轮廓控制器的直线电机精密运动平台轨迹跟踪控制[J]. 中国电机工程学报, 2015, 35(23): 6188-6193.
Wu Zhitao, Zhu Liancheng.Trajectory tracking control for the motion table driven by linear motors based on sliding mode contour tracking controllers[J]. Proceedings of the CSEE, 2015, 35(23): 6188-6193.
[10] 张康, 王丽梅. 基于融合误差的直驱H型平台自适应全局滑模轮廓控制[J]. 中国电机工程学报, 2020, 40(16): 5337-5345.
Zhang Kang, Wang Limei.Adaptive global sliding mode contour control of direct drive H-type platform based on integrated error[J]. Proceedings of the CSEE, 2020, 40(16): 5337-5345.
[11] 张康, 王丽梅. 基于反馈线性化的永磁直线同步电机自适应动态滑模控制[J]. 电工技术学报, 2021, 36(19): 4016-4024.
Zhang Kang, Wang Limei.Adaptive dynamic sliding mode control of permanent magnet linear syn-chronous motor based on feedback linearization[J]. Transactions of China Electrotechnical Society, 2021, 36(19): 4016-4024.
[12] Liu Yang, Wan Min, Xiao Qunbao, et al.Combined predictive and feedback contour error control with dynamic contour error estimation for industrial five-axis machine tools[J]. IEEE Transactions on Industrial Electronics, 2022, 69(7): 6668-6677.
[13] Li Bo, Wang Taiyong, Wang Peng.Cross-coupled control based on real-time Double Circle contour error estimation for biaxial motion system[J]. Measurement and Control, 2021, 54(3/4): 324-335.
[14] Zhang Yanqing, Yin Zhonggang, Li Wei, et al.Finite control set model predictive torque control using sliding model control for induction motors[J]. CES Transactions on Electrical Machines and Systems, 2021, 5(3): 262-270.
[15] 金鸿雁, 赵希梅, 原浩. 永磁直线同步电机动态边界层全局互补滑模控制[J]. 电工技术学报, 2020, 35(9): 1945-1951.
Jin Hongyan, Zhao Ximei, Yuan Hao.Dynamic boundary layer global complementary sliding mode control for permanent magnet linear synchronous motor[J]. Transactions of China Electrotechnical Society, 2020, 35(9): 1945-1951.