考虑交叉耦合影响的内置式永磁同步电机电感计算及转矩分析

doi:10.19595/j.cnki.1000-6753.tces.221385

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (7317 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The electromagnetic torque of an IPMSM (Interior permanent magnet synchronous machine) mainly consists of two components: permanent magnet torque and reluctance torque. The accurate separation and analysis of the torque components can optimize the topology and improve the power density of the machine. The key to accurate analysis of the components of the electromagnetic torque is the accurate calculation of the d-q-axis inductance. This paper uses an IPMSM with 8 poles and 11 kW as an example to solve the d-q-axis inductance and analyze the torque components. By comparing and analyzing two kinds of inductance solving methods, static magnetic field solving inductance and transient field solving inductance, an improved method for fast solving the inductance by the static magnetic field is presented, which achieves high-precision separation and extraction of machine torque components and prediction of electromagnetic torque components in the stage of electromagnetic design.
The improved method determines the current lead angle according to different d-q-axis current combinations, converts the mechanical angle of the machine to the current lead angle, and transforms the relative mechanical position of the stator and rotor to control the machine operation under different current amplitudes or current lead angles. Then, the three-phase flux linkage under different d-q-axis current combinations is obtained by finite element calculation, and the d-q-axis flux linkage is obtained by Park's transformation of the three-phase flux linkage. Finally, the d-q-axis inductance is obtained by solving the d-q-axis flux linkage, and the permanent magnet flux linkage is obtained using the frozen permeability method. The improved method can consider both the cross-coupling and saturation effects under different loads. In addition, the d-q-axis inductance calculated by the above method is combined with the electromagnetic torque equation considering the effect of magnetic saturation and cross-coupling.
The d-q-axis inductances of the target prototype are solved by the transient field method and the improved static magnetic field method, respectively. The relative errors of the d-q-axis inductances solved by the two methods are within 6 %. Compared with the transient field method, the improved static magnetic field method reduces the simulation steps by 96.08 % and the calculation time by 96.14 %. It shows that the improved method can effectively reduce the number of simulation steps and shorten the simulation time. Finally, an experimental test platform is built to test the torque of the target prototype under different operating point currents. The relative errors between the measured torque and the predicted torque are within 3 %. Taking the working condition of the prototype under the rated current as an example, the electromagnetic torque of the machine output at different current lead angles of 0 °to 180 °is separated. At the same time, the composition of the maximum electromagnetic torque obtained by the maximum torque current ratio control logic is analyzed. In the composition, the value of the reluctance torque is 2.55 N·m, accounting for about 3.72 %; and the value of the permanent magnet torque is 66.07 N·m, accounting for about 97.20 %. Moreover, the maximum reluctance torque of the prototype can reach about 11 N·m, while the actual reluctance torque at the maximum electromagnetic torque point is 2.55 N·m, which shows that the magnetic barrier design of this prototype still has a large space for optimization. The torque density of the target machine can be further improved by optimizing the rotor structure combined with the fast torque analysis and the prediction model in this paper. The experimental results verify the accuracy and validity of the new method.

Key words： Permanent magnet synchronous machines inductance calculation torque analysis finite element analysis

Received: 19 July 2022

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Li Shihao
	Di Chong
	Liu Jiwei
	Bao Xiaohua

Cite this article:

Li Shihao,Di Chong,Liu Jiwei等. Inductance Calculation and Torque Analysis of Interior Permanent Magnet Synchronous Machine Considering Cross-Coupling Effects[J]. Transactions of China Electrotechnical Society, 2023, 38(18): 4889-4899.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.221385 OR https://dgjsxb.ces-transaction.com/EN/Y2023/V38/I18/4889

[1] EL-Refaie A M. Fractional-slot concentrated-windings synchronous permanent magnet machines: opportunities and challenges[J]. IEEE Transactions on Industrial Electronics, 2010, 57(1): 107-121.
[2] 倪有源, 王磊, 王群京. 凸形不等厚磁极永磁电机建模与分析[J]. 电工技术学报, 2020, 35(11): 2406-2414.
Ni Youyuan, Wang Lei, Wang Qunjing.Modeling and analysis of permanent magnet motor with convex unequal thickness poles[J]. Transactions of China Electrotechnical Society, 2020, 35(11): 2406-2414.
[3] Lai Chunyan, Feng Guodong, Mukherjee K, et al.Investigations of the influence of PMSM parameter variations in optimal stator current design for torque ripple minimization[J]. IEEE Transactions on Energy Conversion, 2017, 32(3): 1052-1062.
[4] 刘凯, 张炳义, 冯桂宏. 基于非对称绕组函数法永磁同步电机偏心电感参数的研究[J]. 电工技术学报, 2020, 35(增刊2): 387-394, 431.
Liu Kai, Zhang Bingyi, Feng Guihong.Research on eccentric inductance parameters of permanent magnet synchronous motor based on asymmetric winding function method[J]. Transactions of China Elec-trotechnical Society, 2020, 35(S2): 387-394, 431.
[5] 郭凯凯, 郭有光. 磁通反向直线旋转永磁电机三维非线性等效磁路模型分析[J]. 电工技术学报, 2020, 35(20): 4278-4286.
Guo Kaikai, Guo Youguang.Analysis of three-dimensional nonlinear equivalent magnetic circuit model of permanent magnet motor with reverse flux linear rotation[J]. Transactions of China Electro-technical Society, 2020, 35(20): 4278-4286.
[6] 李文真, 刘景林. 考虑磁路饱和及交叉耦合效应的内置式永磁同步电机无传感器优化方法[J]. 电工技术学报, 2020, 35(21): 4465-4474.
Li Wenzhen, Liu Jinglin.Sensorless optimization method of built-in permanent magnet synchronous motor considering magnetic circuit saturation and cross-coupling effect[J]. Transactions of China Elec-trotechnical Society, 2020, 35(21): 4465-4474.
[7] 陈卓易, 屈稳太. 基于PID型代价函数的永磁同步电机模型预测电流控制[J]. 电工技术学报, 2021, 36(14): 2971-2978.
Chen Zhuoyi, Qu Wentai.Model predictive current control for permanent magnet synchronous motors based on PID-type cost function[J]. Transactions of China Electrotechnical Society, 2021, 36(14): 2971-2978.
[8] Zhong Yuxiang, Lin Heyun, Chen Zhiyong, et al.Online-parameter-estimation-based control strategy combining MTPA and flux-weakening for variable flux memory machines[J]. IEEE Transactions on Power Electronics, 2022, 37(4): 4080-4090.
[9] 刘金海, 陈为, 胡金高. 永磁同步电机dq电感参数新实验获取法[J]. 电工技术学报, 2014, 29(7): 97-103.
Liu Jinhai, Chen Wei, Hu Jingao.Novel experimental methods of acquiring dq inductance of permanent magnet synchronous motors[J]. Transactions of China Electrotechnical Society, 2014, 29(7): 97-103.
[10] Sarikhani A, Nejadpak A, Mohammed O A.Coupled field-circuit estimation of operational inductance in PM synchronous machines by a real-time physics-based inductance observer[J]. IEEE Transactions on Magnetics, 2013, 49(5): 2283-2286.
[11] Lai Chunyan, Feng Guodong, Mukherjee K, et al.Torque ripple minimization for interior PMSM with consideration of magnetic saturation incorporating on-line parameter identification[C]//2016 IEEE Con-ference on Electromagnetic Field Computation (CEFC), Miami, FL, USA, 2017: 1.
[12] Shuang Bo, Zhu Ziqiang.A novel method for estimating the high frequency incremental DQ-axis and cross-coupling inductances in interior permanent magnet synchronous machines[J]. IEEE Transactions on Industry Applications, 2021, 57(5): 4913-4923.
[13] Shin K H, Park H I, Lee S H, et al.Armature reaction field and inductance calculations for a permanent magnet linear synchronous machine based on subdomain model[C]//2016 IEEE Conference on Electromagnetic Field Computation (CEFC), Miami, FL, USA, 2017: 1.
[14] Lee K D, Lee Ju, Lee H W.Inductance calculation of flux concentrating permanent magnet motor through nonlinear magnetic equivalent circuit[J]. IEEE Transactions on Magnetics, 2015, 51(11): 1-4.
[15] Jeong I, Nam K.Analytic expressions of torque and inductances via polynomial approximations of flux linkages[J]. IEEE Transactions on Magnetics, 2015, 51(7): 1-9.
[16] Silvester P, Chari M V K. Finite element solution of saturable magnetic field problems[J]. IEEE Transa-ctions on Power Apparatus and Systems, 1970, PAS-89(7): 1642-1651.
[17] 郑萍, 王勃, 吴帆, 等. 电动汽车用双三相永磁同步电机饱和电感特性分析及计算方法[J]. 电工技术学报, 2013, 28(7): 19-25.
Zheng Ping, Wang Bo, Wu Fan, et al.Analysis and calculation method of saturated inductance of a dual-three phase permanent-magnet synchronous machine for electric vehicles[J]. Transactions of China Electrotechnical Society, 2013, 28(7): 19-25.
[18] 符荣, 窦满峰. 电动汽车驱动用内置式永磁同步电机直交轴电感参数计算与实验研究[J]. 电工技术学报, 2014, 29(11): 30-37.
Fu Rong, Dou Manfeng.D-axis and Q-axis inductance calculation and experimental research on interior permanent magnet synchronous motors for EV[J]. Transactions of China Electrotechnical Society, 2014, 29(11): 30-37.
[19] 李和明, 张健, 罗应立, 等. 考虑交叉饱和影响的永磁同步电机稳态参数有限元分析[J]. 中国电机工程学报, 2012, 32(12): 104-110.
Li Heming, Zhang Jian, Luo Yingli, et al.Finite element analysis of PMSM steady state parameters considering cross-saturation effect[J]. Proceedings of the CSEE, 2012, 32(12): 104-110.
[20] 王艾萌. 内置式永磁同步电动机的优化设计及弱磁控制研究[D]. 北京: 华北电力大学, 2010.
[21] Drobnič K, Gašparin L, Fišer R.Fast and accurate model of interior permanent-magnet machine for dynamic characterization[J]. Energies, 2019, 12(5): 783.
[22] 刘健. 电路分析[M]. 北京: 电子工业出版社, 2005.
[23] 袁雷, 胡冰新, 魏克银. 现代永磁同步电机控制原理及MATLAB仿真[M]. 北京: 北京航空航天大学出版社, 2016.