四开关Buck-Boost变换器的多模式模型预测控制策略

doi:10.19595/j.cnki.1000-6753.tces.210654

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2815 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The four-switch Buck-Boost converter can operate in multiple operating modes, which is suitable for wide voltage range conversion occasions. How to choose a suitable operating mode and achieve smooth mode switching is the key issue to be solved. In this paper, a multi-mode model predictive control (MPC) strategy for the four-switch Buck-Boost converter was proposed. According to the voltage conversion requirements, four operating modes of the converter were determined. On the basis of the traditional Buck and Boost modes, two extended modes were adopted to eliminate the control dead zone that existed in the Buck and Boost modes when the input voltage was close to the output voltage. The predictive mechanism of the model predictive control method was used to realize the predictive current control of each operating mode, and at the same time, the most suitable operating mode was selected according to the duty cycle prediction results of different operating modes in the next control cycle. Simulation and experimental results demonstrate that the proposed control strategy can effectively select the most suitable operating mode of the four-switch Buck-Boost converter and achieve smoother mode switching, and has better dynamic response performance.

Key words： Four-switch Buck-Boost multiple operating modes model predictive control mode switching

Received: 08 May 2021

PACS:

TM46

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wu Yan
	Wang Wei
	Zeng Guohong
	Wu Xuezhi
	Tang Fen

Cite this article:

Wu Yan,Wang Wei,Zeng Guohong等. Multi-Mode Model Predictive Control Strategy for the Four-Switch Buck-Boost Converter[J]. Transactions of China Electrotechnical Society, 2022, 37(10): 2572-2583.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.210654 OR https://dgjsxb.ces-transaction.com/EN/Y2022/V37/I10/2572

[1] 杨美辉, 周念成, 王强钢, 等. 基于分布式协同的双极直流微电网不平衡电压控制策略[J]. 电工技术学报, 2021, 36(3): 634-645.
Yang Meihui, Zhou Niancheng, Wang Qianggang, et al.Unbalanced voltage control strategy of bipolar DC microgrid based on distributed cooperation[J]. Transactions of China Electrotechnical Society, 2021, 36(3): 634-645.
[2] 刘彦呈, 庄绪州, 张勤进, 等. 基于虚拟频率的直流微电网下垂控制策略[J]. 电工技术学报, 2021, 36(8): 1693-1702.
Liu Yancheng, Zhuang Xuzhou, Zhang Qinjin, et al.A virtual current-frequency droop control in DC microgrid[J]. Transactions of China Electrotechnical Society, 2021, 36(8): 1693-1702.
[3] 王朝强, 曹太强, 郭筱瑛, 等. 三相交错并联双向DC-DC变换器动态休眠控制策略[J]. 电工技术学报, 2020, 35(15): 3214-3223.
Wang Chaoqiang, Cao Taiqiang, Guo Xiaoying, et al.Dynamic dormancy control strategy of three-phase staggered parallel bidirectional DC-DC converter[J]. Transactions of China Electrotechnical Society, 2020, 35(15): 3214-3223.
[4] 李优新, 吴鹏, 刘剑彬, 等. 一种改进的四开关Buck-Boost变换器控制策略[J]. 电气传动, 2020, 50(8): 33-38.
Li Youxin, Wu Peng, Liu Jianbin, et al.An improved control strategy of four switch Buck-Boost converter[J]. Electric Drive, 2020, 50(8): 33-38.
[5] Zhou Zongjie, Li Haiyan, Wu Xinke.A constant frequency ZVS control system for the four-switch Buck-Boost DC-DC converter with reduced inductor current[J]. IEEE Transactions on Power Electronics, 2019, 34(7): 5996-6003.
[6] Wu K C, Wu H H, Wei C L.Analysis and design of mixed-mode operation for non-inverting Buck-Boost DC-DC converters[J]. IEEE Transactions on Circuits & Systems II Express Briefs, 2015, 62(12): 1194-1198.
[7] Jia Leilei, Sun Xiaofeng, Zheng Zhiwen, et al.Multimode smooth switching strategy for eliminating the operational dead zone in noninverting Buck-Boost converter[J]. IEEE Transactions on Power Electronics, 2020, 35(3): 3106-3113.
[8] 颜湘武, 王杨, 葛小凤, 等. 双管Buck-Boost变换器的带输入电压前馈双闭环控制策略[J]. 电力自动化设备, 2016, 36(10): 65-70, 77.
Yan Xiangwu, Wang Yang, Ge Xiaofeng, et al.Dual- loop control with input voltage feedforward for dual-switch Buck-Boost converter[J]. Electric Power Automation Equipment, 2016, 36(10): 65-70, 77.
[9] 任小永, 阮新波, 李明秋, 等. 双沿调制的四开关Buck-Boost变换器[J]. 中国电机工程学报, 2009, 29(12): 16-23.
Ren Xiaoyong, Ruan Xinbo, Li Mingqiu, et al.Dual edge modulated four-switch Buck-Boost converter[J]. Proceedings of the CSEE, 2009, 29(12): 16-23.
[10] Zhang Guidong, Yuan Jun, Yu S S, et al.Advanced four-mode-modulation-based four-switch non-inverting Buck-Boost converter with extra operation zone[J]. IET Power Electronics, 2020, 13(10): 2049-2059.
[11] Tsai Y Y, Tsai Y S, Tsai C W, et al.Digital noninverting- Buck-Boost converter with enhanced duty-cycle- overlap control[J]. IEEE Transactions on Circuits and Systems II: Express Briefs, 2017, 64(1): 41-45.
[12] 李山, 宋立风, 章治国. 四开关Buck-Boost变换器的三模式控制方法研究[J]. 电源学报, 2019, 17(3): 111-119.
Li Shan, Song Lifeng, Zhang Zhiguo.Study on three- mode control method for four-switch Buck-Boost converter[J]. Journal of Power Supply, 2019, 17(3): 111-119.
[13] 程盛. 直流微网柔性互联开关控制策略研究[D]. 北京: 北京交通大学, 2017.
[14] Wang Yuan, Lan Jianyu, Huang Xin, et al.An improved single-mode control strategy based on four-switch Buck-Boost converter[C]//2020 IEEE Applied Power Electronics Conference and Expo- sition, New Orleans, LA, USA, 2020: 1-6.
[15] Tsai C H, Tsai Y S, Liu H C.A stable mode-transition technique for a digitally controlled non-inverting Buck-Boost DC-DC converter[J]. IEEE Transactions on Industrial Electronics, 2015, 62(1): 475-483.
[16] Yu Zhe, Kapels H, Hoffmann K F.A novel control concept for high-efficiency power conversion with the bidirectional non-inverting Buck-Boost converter[C]// 2016 18th European Conference on Power Electronics and Applications, Karlsruhe, Germany, 2016: 1-10.
[17] 杨惠, 晁凯悦, 孙向东, 等. 基于矢量作用时间的双向DC-DC变换器预测电流控制方法[J]. 电工技术学报, 2020, 35(增刊1): 70-80.
Yang Hui, Chao Kaiyue, Sun Xiangdong, et al.Predictive current control method for bidirectional DC-DC converter based on optimal operating time of vector[J]. Transactions of China Electrotechnical Society, 2020, 35(S1): 70-80.
[18] Li Yu, Zhang Zhenbin, Li Kejun, et al.Predictive current control for voltage source inverters con- sidering dead-time effect[J]. CES Transactions on Electrical Machines and Systems, 2020, 4(1): 35-42.
[19] 丁雄, 林国庆. 三相并网逆变器的改进模型预测控制研究[J]. 电气技术, 2020, 21(3): 16-21.
Ding Xiong, Lin Guoqing.Research on three-phase grid-connected inverter based on discrete space vector model predictive control[J]. Electrical Engineering, 2020, 21(3): 16-21.
[20] 耿强, 王亮, 周湛清, 等. 五桥臂逆变器双永磁电机三矢量预测控制[J]. 电工技术学报, 2021, 36(1): 87-95.
Geng Qiang, Wang Liang, Zhou Zhanqing, et al.Three-vector-based predictive control for dual permanent magnet synchronous motors fed by the five-leg inverter[J]. Transactions of China Electro- technical Society, 2021, 36(1): 87-95.
[21] 王祯, 尹项根, 陈玉, 等. 基于连续控制集模型预测控制的MMC桥臂电流控制策略[J]. 电力系统自动化, 2020, 44(10): 85-91.
Wang Zhen, Yin Xianggen, Chen Yu, et al.Arm current control strategy of modular multilevel con- verter based on continuous control set model predictive control[J]. Automation of Electric Power System, 2020, 44(10): 85-91.
[22] 梅杨, 陈丽莎, 黄伟超, 等. 级联式双向DC-DC变换器的优化控制方法[J]. 电工技术学报, 2017, 32(19): 153-159.
Mei Yang, Chen Lisha, Huang Weichao, et al.Optimized control method of cascaded bi-directional DC-DC converters[J]. Transactions of China Electro- technical Society, 2017, 32(19): 153-159.
[23] 贾志东, 姜久春, 程龙, 等. 适用于Boost变换器的自适应模型预测控制算法[J]. 中国电机工程学报, 2018, 38(19): 5838-5845, 5941.
Jia Zhidong, Jiang Jiuchun, Cheng Long, et al.An adaptive model predictive control for DC-DC Boost converters[J]. Proceedings of the CSEE, 2018, 38(19): 5838-5845, 5941.
[24] 陈燕东, 罗安, 周乐明, 等. 一种功率前馈的鲁棒预测无差拍并网控制方法[J]. 中国电机工程学报, 2013, 33(36): 62-70, 10.
Chen Yandong, Luo An, Zhou Leming, et al.A robust predictive deadbeat grid-connected control method based on power feed-forward control[J]. Proceedings of the CSEE, 2013, 33(36): 62-70, 10.