用于电动汽车无线充电线圈互操作性评价的量规设备研究

doi:10.19595/j.cnki.1000-6753.tces.L90467

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2440 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract With the development of wireless charging technology for electric vehicles, more and more types of charging coils emerge. However, due to the different magnetic flux distribution, it is difficult to ensure the interoperability between the transmitter and receiver of different products, which hinders the interconnection between products. To accurately evaluate the interoperability between different coils, the fundamental mutual inductance (FMI) is selected as the indicator, and the relationship between the FMI and the coil interoperability is analyzed. Then, the open-loop voltage of the gauge device is used to calculate the FMI, which makes the FMI be measured easily. Aiming at the problem that the parameter design method of gauge device in the standard SAE j2954 is not clear, this paper analyzes the influence of different parameters on the evaluation results and proposes an optimization method for the gauge device. Finally, a prototype of the gauge device is designed. The evaluation results prove the effectiveness of the proposed design method of the gauge device.

Key words： Wireless charging interoperability gauge device fundamental mutual inductance electric vehicle

Received: 03 July 2020

PACS:

TM724

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yang Guang
	Song Kai
	Huang Xiaohua
	Li Jin
	Zhu Chunbo

Cite this article:

Yang Guang,Song Kai,Huang Xiaohua等. Research on the Gauge Device for Coil Interoperability Evaluation of Wireless Electric Vehicle Charging[J]. Transactions of China Electrotechnical Society, 2020, 35(zk2): 363-370.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L90467 OR https://dgjsxb.ces-transaction.com/EN/Y2020/V35/Izk2/363

[1] 吴理豪, 张波. 电动汽车静态无线充电技术研究综述(上篇)[J]. 电工技术学报, 2020, 35(6): 1153-1165.
Wu Lihao, Zhang Bo.Overview of static wireless charging technology for electric vehicles: part I[J]. Transactions of China Electrotechnical Society, 2020, 35(6): 1153-1165.
[2] 范兴明, 高琳琳, 莫小勇, 等. 无线电能传输技术的研究现状与应用综述(英文)[J]. 电工技术学报, 2019, 34(7): 1353-1380.
Fan Xingming, Gao Linlin, Mo Xiaoyong, et al.Overview of research status and application of wireless power transmission technology[J]. Transac-tions of China Electrotechnical Society, 2019, 34(7): 1353-1380.
[3] 张波, 疏许健, 吴理豪, 等. 无线电能传输技术亟待解决的问题及对策[J]. 电力系统自动化, 2019, 43(18): 1-20.
Zhang Bo, Shu Xujian, Wu Lihao, et al.Problems of wireless power transmission technology urgent to be solved and corresponding countermeasures[J]. Automation of Electric Power Systems, 2019, 43(18): 1-20.
[4] 吴丽君, 李冠西, 张朱浩伯, 等. 一种具有恒流恒压输出自切换特性的电动汽车无线电能传输系统拓扑[J]. 电工技术学报, 2020, 35(18): 3781-3790.
Wu Lijun, Li Guanxi, Zhang Zhuhaobo, et al.A wireless power transfer system topology with automatic switching characteristics of constant current and constant voltage output for electric vehicle charging[J]. Transactions of China Electrotechnical Society, 2020, 35(18): 3781-3790.
[5] 耿宇宇, 杨中平, 林飞, 等. 用于混合储能系统供电的无线电能传输技术效率优化策略研究[J].电工技术学报, 2019, 34(增刊1): 424-432.
Geng Yuyu, Yang Zhongping, Lin Fei, et al.Efficiency optimization strategy for wireless power transfer used in hybrid energy storage system[J]. Transactions of China Electrotechnical Society, 2019, 34(S1): 424-432.
[6] 吝伶艳, 方成刚, 宋建成, 等. 磁谐振无线输电系统不同补偿方式的传输特性[J]. 电机与控制学报, 2019, 23(12): 59-67.
Lin Lingyan, Fang Chenggang, Song Jiancheng, et al.Transmission characteristics of different compensation methods in wireless power transfer system based on magnetic coupling resonance[J]. Electric Machines and Control, 2019, 23(12): 59-67.
[7] Budhia M, Covic G, Boys J.Design and optimization of circular magnetic structures for lumped inductive power transfer systems[J]. IEEE Transactions on Power Electronics, 2011, 26(11): 3096-3108.
[8] Budhia M, Boys J, Covic G, et al.Development of a single-sided flux magnetic coupler for electric vehicle IPT charging systems[J]. IEEE Transactions on Industrial Electronics, 2013, 60(1): 318-328.
[9] Ke Guangjie, Chen Qianhong, Xu Ligang, et al.A model for coupling under coil misalignment for DD pads and circular pads of WPT system[C]// 2016 IEEE Energy Conversion Congress and Exposition, Milwaukee, 2016: 1-6.
[10] Song Kai, Yang Guang, Guo Yu, et al.Design of DD coil with high misalignment tolerance and low emf emissions for wireless electric vehicle charging systems[J]. IEEE Transactions on Power Electronics, 2020, 35(9): 9034-9045.
[11] Zhao L, Ruddell S, Thrimawithana D, et al.A hybrid wireless charging system with DDQ pads for dynamic charging of EVs[C]// 2017 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer, Chongqing, 2017: 1-6.
[12] Rasekh N, Kavianpour J, Mirsalim M.A novel integration method for a bipolar receiver pad using LCC compensation topology for wireless power transfer[J]. IEEE Transactions on Vehicular Technology, 2018, 67(8): 7419-7428.
[13] Rasekh N, Mojtaba M.Evaluation study on an integration method for a DDQP using LCC and series compensation topologies for inductive power transfer[J]. IET Electric Power Applications, 2018, 12(9): 1320-1327.
[14] Liu Chunhua, Jiang Chaoqiang, Qiu Chun.Overview of coil designs for wireless charging of electric vehicle[C]// 2017 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer, Chongqing, 2017: 1-6.
[15] Song Kai, Guo Yu, Yang Guang, et al.Interoperability analysis and improvement for rectangular coil and dd coil of wireless EV charging[C]// 22nd International Conference on Electrical Machines and Systems, Harbin, 2019: 1-5.
[16] 张献, 白雪宁, 沙琳, 等. 电动汽车无线充电系统不同结构线圈间互操作性评价方法研究[J]. 电工技术学报, 2020, 35(19): 4150-4160.
Zhang Xian, Bai Xuening, Sha Lin, et al.Research on interoperability evaluation method of different coils in wireless charging system of electric vehicles[J]. Transactions of China Electrotechnical Society, 2020, 35(19): 4150-4160.
[17] SAE J2954 Wireless power transfer for light-duty plug-in/electric vehicles and alignment methodology[S]. USA: SAE, 2016.
[18] Ibrahim M, Bernard L, Pichon L, et al.Inductive charger for electric vehicle: advanced modeling and interoperability analysis[J]. IEEE Transactions on Power Electronics, 2016, 31(12): 8096-8114.
[19] RamRakhyani A, Mirabbasi S, Chiao M. Design and optimization of resonance-based efficient wireless power delivery systems for biomedical implants[J]. IEEE Transactions on Biomedical Circuits & Systems, 2011, 5(1): 48-63.
[20] Hassler M, Niedermeier F, Krammer J, et al.A method for interoperable interface description of inductive power transfer systems[C]//2018 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer, Montréal, 2018: 1-5.