B探针测速及基于激光方法的精度研究

doi:10.19595/j.cnki.1000-6753.tces.191747

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2772 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, the electromagnetic induction principle of B-probe is analyzed, and it is pointed out that there is a certain error in measuring the time when armature passes through its position using B-probe. The principle of measuring the velocity of armature in the bore of electromagnetic railgun by B-probe and laser is introduced respectively. The system of laser measuring armature position with fast response and high precision is built. A comparative experiment of measuring armature velocity by B-probe and laser is designed. Some experimental data are obtained. The signal waveform of laser measuring armature passing through is analyzed. The uncertainty error of armature velocity measured by laser is analyzed and calculated. Based on the armature velocity measured by laser, the precision of armature velocity measured by B-probe is calculated, and the precision of armature velocity measured by B-probe is obtained. Through the experimental research and analysis, it has a certain reference value in engineering application.

Key words： Electromagnetic railgun B-probe laser velocity precision

Received: 12 December 2019

PACS:

TM153

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Li Juxiang
	Cao Bin
	Fan Zhiguo
	Guo Wei
	Chen Yanhui

Cite this article:

Li Juxiang,Cao Bin,Fan Zhiguo等. Research on Speed Measurement by B-Probe and Precision Based on Laser Method[J]. Transactions of China Electrotechnical Society, 2020, 35(zk2): 327-332.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.191747 OR https://dgjsxb.ces-transaction.com/EN/Y2020/V35/Izk2/327

[1] 张祎, 李贞晓, 杨春霞, 等. 基于MGM(1,N)模型的C型固体电枢初速研究[J]. 火炮发射与控制学报, 2012(4): 5-8.
Zhang Yi, Li Zhenxiao, Yang Chunxia, et al.The research on the muzzle velocity of C-type solid armature based on MGM(1,N) model[J]. Journal of Gun Launch & Control, 2012(4): 5-8.
[2] 马伟明, 肖飞, 聂世雄. 电磁发射系统中电力电子技术的应用与发展[J]. 电工技术学报, 2016, 31(19): 1-10.
Ma Weiming, Xiao Fei, Nie Shixiong.Applications and development of power electronics in electromagnetic launch system[J]. Transactions of China Electrotechnical Society, 2016, 31(19): 1-10.
[3] Parker J V.Magnetic-probe diagnostics for railgun plasma armatures[J]. IEEE Transactions on Plasma Science, 1989, 17(3): 487-500.
[4] Dreizin Y A, Barber J P.On the origins of muzzle voltage[J]. IEEE Transactions on Magnetics, 1995, 31(1): 582-586.
[5] Parker J V.Experimental observation of the rail resistance contribution to muzzle voltage[J]. IEEE Transactions on Magnetics, 1999, 35(1): 437-441.
[6] Zielinski A, Watt T, Motes D.Disrupting armature ejecta and its effects on rail damage in solid-armature railguns[J]. IEEE Transactions on Plasma Science, 2011, 39(3): 941-946.
[7] Satapathy S, Watt T, Persad C.Effect of geometry change on armature behavior[J]. IEEE Transactions on Magnetics, 2007, 43(1): 408-412.
[8] 刘旭堃, 于歆杰, 刘秀成, 等. 电磁轨道炮运行阶段系统发射效率和电枢出膛动能研究[J]. 电工技术学报, 2017, 32(3): 210-217.
Liu Xukun, Yu Xinjie, Liu Xiucheng, et al.Researches on the system launch efficiency and the armature muzzle kinetic energy of a constructed electromagnetic railgun[J]. Transactions of China Electrotechnical Society, 2017, 32(3): 210-217.
[9] 周蠡, 鲁铁成, 张博, 等. 基于三维分形接触电阻模型的粗糙表面多物理场耦合分析[J]. 电工技术学报, 2015, 30(14): 226-232.
Zhou Li, Lu Tiecheng, Zhang Bo, et al.Multi-physics coupling analysis of rough surfaces using 3D fractal model[J]. Transactions of China Electrotechnical Society, 2015, 30(14): 226-232.
[10] 刘旭堃, 于歆杰, 刘秀成. 电容储能型脉冲电源分时分段触发策略自动计算方法[J]. 电工技术学报, 2016, 31(11): 186-193.
Liu Xukun, Yu Xinjie, Liu Xiucheng.An automatic calculation method for the triggering strategy of the capacitive pulsed-power supply[J]. Transactions of China Electrotechnical Society, 2016, 31(11): 186-193.
[11] 常馨月, 于歆杰, 刘旭堃. 一种实现电枢出膛速度控制的电磁轨道炮脉冲电源触发策略[J]. 电工技术学报, 2018, 33(10): 2261-2267.
Chang Xinyue, Yu Xinjie, Liu Xukun.A velocity-controlling triggering strategy of capacitive pulsed power supply electromagnetic railgun system[J]. Transactions of China Electrotechnical Society, 2018, 33(10): 2261-2267.
[12] 徐伟东, 袁伟群, 谢克瑜, 等. 电枢膛内位置及速度的直接接触式测量方法[J]. 高电压技术, 2014, 40(4): 1110-1115.
Xu Weidong, Yuan Weiqun, Xie Keyu, et al.Direct measurement of position and velocity of armature inside electromagnetic launcher[J]. High Voltage Engineering, 2014, 40(4): 1110-1115.
[13] 丁伟杰, 赵辉, 徐伟东, 等. 基于光纤传输的膛内测试技术研究[J]. 光通信技术, 2014, 38(5): 9-11.
Ding Weijie, Zhao Hui, Xu Weidong, et al.Research of measure the armature position in a railgun by using option fiber transmission technology[J]. Optical Communication Technology, 2014, 38(5): 9-11.
[14] 高昆山, 周克栋, 赫雷. 激光测速靶前端电路设计[J]. 兵工自动化, 2012, 31(7): 82-84.
Gao Kunshan, Zhou Kedong, He Lei.Front-end circuit design of laser velocity target[J]. Ordnance Industry Automation, 2012, 31(7): 82-84.