径向换能型超声波电机定子振动模型

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2514 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract A radial energy conversion ultrasonic motor with elastic blades is proposed in this paper.The structure and the operational principle of the motor are presented.The analytical model for the free and the forced radial vibration of the stator is investigated.Meanwhile,in order to carry out the contrast verification,the finite element model of the stator is developed as well as the modal and the harmonic analysis are conducted.The first order resonant frequency of the stator vibration in radial direction and the forced radial vibration amplitude stimulated by the applied voltage are obtained based on the two proposed models,and good agreements between the results obtained from the two models are observed.The first order resonant frequency of the stator radial vibration is measured with impedance analyzer,and the forced radial vibration amplitudes of the stator surface points stimulated by the applied voltage are measured with laser Doppler velocimeter.The experimental results are compared with the theoretical results and good agreements are obtained,which verifies the proposed analytical model and the finite element model for the stator vibration.Finally,a prototype machine is manufactured to verify the operational principle of the proposed radial energy conversion ultrasonic motor.

Key words： Ultrasonic motor radial energy conversion stator vibration analytical model finite element model

Received: 18 February 2016 Published: 12 May 2017

PACS:

TM35

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Jiang Chunrong
	Dong Xiaoxiao
	Zhang Jinyang
	Jin Long

Cite this article:

Jiang Chunrong,Dong Xiaoxiao,Zhang Jinyang等. Stator Vibration Model of a Radial Energy Conversion Ultrasonic Motor[J]. Transactions of China Electrotechnical Society, 2017, 32(9): 48-55.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I9/48

[1] Peng Taijiang,Shi Hongyan,Liang Xiong,et al.Experimental investigation on sandwich structure ring-type ultrasonic motor[J].Ultrasonics,2015,56:303-307.
[2] 陆旦宏,胡敏强,金龙,等.基于空间调相的环形行波超声波电机的幅相控制[J].电工技术学报,2014,29(3):132-142.
Lu Danhong,Hu Minqiang,Jin Long,et al.Amplitude-phase control of ring-type travelling-wave ultrasonic motors based on space phase modulation[J].Transactions of China Electrotechnical Society,2014,29(3):132-142.
[3] 沈润杰,王波,郭吉丰,等.微型斜齿超声波电机的研究[J].振动工程学报,2007,20(5):543-548.
Shen Runjie,Wang Bo,Guo Jifeng.Study on skew teeth micro ultrasonic motor[J].Journal of Vibration Engineering,2007,20(5):543-548.
[4] 王光庆,岳玉秋,展永政.纵-弯复合旋转式超声波电动机的优化设计与性能分析[J].电工技术学报,2015,30(22):33-41.
Wang Guangqing,Yue Yuqiu,Zhan Yongzheng. Optimum design and performances analysis of the longitudinal-bending hybrid rotating type ultrasonic motor[J].Transactions of China Electrotechnical Society,2015,30(22):33-41.
[5] 王剑,郭吉丰.一种中空短柱径向-扭转振动复合型超声波电动机[J].电工技术学报,2009,24(10):6-11.
Wang Jian,Guo Jifeng.A radial-torsional vibration hybrid type ultrasonic motor with hollow and short cylindrical structure[J].Transactions of China Electrotechnical Society,2009,24(10):6-11.
[6] Sheng Mingwei,Chen Weishan,Liu Junkao,et al.Study and test of a double-rotor ultrasonic motor with symmetrical longitudinal-torsional converter[C]//18 th IEEE International Symposium on the Applications of Ferroelectrics,Xian,China,2009.
[7] Shi Jingzhuo,You Dongmei.Characteristic model of travelling wave ultrasonic motor[J].Ultrasonics,2014,54(2):725-730.
[8] Hagedorn P,Wallashek J,Konrad W.Travelling wave ultrasonic motors,part II:a numerical method for the flexural vibrations of the stator[J].Journal of Sound and Vibration,1993,168(1):115-122.
[9] Pons J L,Rodriguez H,Ceres R,et al.Novel modeling technique for the stator of traveling wave ultrasonic motors[J].IEEE Transactions on Ultrasonics,Ferroelectrics,and Frequency Control,2003,50(11):1429-1435.
[10] Nakagawa Y,Saito A,Maeno T.Nonlinear dynamic analysis of traveling wave-type ultrasonic motors[J].IEEE Transactions on Ultrasonics,Ferroelectrics,and Frequency Control,2008,55(3):717-725.
[11] Sun Dong,Liu Jinbo,Ai Xing.Modeling and performance evaluation of traveling wave piezoelectric ultrasonic motors with analytical method[J].Sensors and Actuators A:Physical,2002,100(1):84-93.
[12] Yao Zhiyuan,Zhao Chunsheng,Zeng Jinsong,et al.Analytical solution on the non-linear vibration of a traveling wave ultrasonic motor[J].Journal of Electroceramics,2008,20(3-4):251-258.
[13] 王光庆,陆国丽,郭吉丰.基于能量等效的行波型超声波电动机解析模型[J].机械工程学报,2008,44(2):74-81.
Wang Guangqing,Lu Guoli,Guo Jifeng.Analytical model of traveling-wave type ultrasonic motor based on the energy equivalent method[J].Journal of Mechanical Engineering,2008,44(2):74-81.
[14] Liu Yingxiang,Liu Junkao,Chen Weishan.A cylindrical traveling wave ultrasonic motor using a circumferential composite transducer[J].IEEE Transactions on Ultrasonics,Ferroelectrics,and Frequency Control,2011,58(11):2397-2404.
[15] 夏长亮,郑尧,史婷娜,等.行波接触型超声波电机定子振动有限元分析[J].中国电机工程学报,2001,21(2):25-28,32.
Xia Changliang,Zheng Yao,Shi Tingna,et al.FEM analysis on stator vibration of traveling wave type contact ultrasonic motor[J].Proceedings of the CSEE,2001,21(2):25-28,32.
[16] 莫岳平,胡敏强,徐志科,等.超声波电机振动模态有限元分析[J].中国电机工程学报,2002,22(11):92-96.
Mo Yueping,Hu Minqiang,Xu Zhike,et al. The finite element analysis on the vibration mode of ultrasonic motor[J].Proceedings of the CSEE,2002,22(11):92-96.
[17] Morega A M,Robello G,Morega M,et al.Numerical study of the stator motion in a piezoelectric ultrasonic motor[C]//9th International Symposium on Advanced Topics in Electrical Engineering,Bucharest,Romania,2015:609-613.
[18] Lin Shuyu.Study on the radial composite piezoelectric ceramic transducer in radial vibration[J].Ultrasonics,2007,46(1):51-59.
[19] Lin Shuyu.Study on the radial vibration of a new type of composite piezoelectric transducer[J].Journal of Sound and Vibration,2007,306(1-2):192-202.
[20] 王矜奉,苏文斌,王春明,等.压电振动理论与应用[M].北京:科学出版社,2011:81-122.