移相串联谐振高压电容器充电电源谐振参数设计方法及其电流控制策略

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (946 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper proposes a resonant parameter design method and fuzzy control strategy for the charging current of high-voltage capacitor charging power supply, based on the phase-shifted series resonant converter (PS-SRC). Phase-shifted modulation scheme is employed to run the series resonant high-voltage capacitor charging power supply under over-resonance and continuous current modes. The electric characteristics and boundary conditions of three PS-SRC operation modes are analyzed and derived. And then, the operation mode is analyzed in detail by the numerical method, which is suitable for capacitor charging application. To meet the application requirements of high-voltage capacitor charging power supply, the design method of resonant parameters is proposed. Moreover, because it is hard to derive the precise mathematical model of PS-SRC, fuzzy control strategy of charging current is proposed, and the design method of fuzzy controller is presented. Finally, the experimental results verify the validity and feasibility of the resonant parameter design method and the charging current control strategy.

Key words： Phase-shifted series resonant converter high-voltage capacitor charging power supply resonant parameters fuzzy control

Received: 02 July 2014 Published: 01 September 2016

PACS:

TM910.6

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liao Yongfu
	Lin Lei
	Li Ao
	Zhong Heqing
	Deng Yu
	Wang Jun

Cite this article:

Liao Yongfu,Lin Lei,Li Ao等. Resonant Parameters Design Method and Current Control Strategy of Phase-Shifted Series Resonant High-Voltage Capacitor Charging Power Supply[J]. Transactions of China Electrotechnical Society, 2016, 31(16): 83-92.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2016/V31/I16/83

[1] 李冬黎, 曹丰文, 张晋, 等. 脉冲功率技术在环境工程领域的应用[J]. 高电压技术, 2002, 28(10): 35-38.
Li Dongli, Cao Fengwen, Zhang Jin, et al. The appli- cations of pulsed power in environment engineering[J]. High Voltage Engineering, 2002, 28(10): 35-38.
[2] 苑希超, 雷彬, 李治源, 等. 被动电磁装甲对金属射流的电流作用特性[J]. 电工技术学报, 2014, 29(7): 38-44.
Yuan Xichao, Lei Bin, Li Zhiyuan, et al. Current effect characteristics on shaped charge jet in passive electromagnetic armor[J]. Transactions of China Electrotechnical Society, 2014, 29(7): 38-44.
[3] 钟和清, 邹云屏, 徐至新, 等. 一种基于三电平逆变器拓扑的串联谐振软开关CCPS[J]. 电工技术学报, 2004, 19(10): 18-22.
Zhong Heqing, Zou Yunping, Xu Zhixin, et al. A series resonant soft switching CCPS based on three- level inverter topology[J]. Transactions of China Electrotechnical Society, 2004, 19(10): 18-22.
[4] 钟和清, 徐至新, 邹云屏, 等. 寄生电容对串联谐振电容器充电电源特性的影响[J]. 中国电机工程学报, 2005, 25(10): 40-44.
Zhong Heqing, Xu Zhixin, Zou Yunping, et al. Effects of parasitical capacitors on charging characte- ristic of series resonant CCPS[J]. Proceedings of the CSEE, 2005, 25(10): 40-44.
[5] 张献, 杨庆新, 张欣, 等. 新型电磁耦合谐振式无线电能传输系统建模与实验验证[J]. 电工技术学报, 2014, 29(2): 185-196.
Zhang Xian, Yang Qingxin, Zhang Xin, et al. Modeling and experimental verification for a novel wireless power transmission system via electro- magnetic resonant coupling[J]. Transactions of China Electrotechnical Society, 2014, 29(2): 185-196.
[6] Ryoo H J, Ahh S H, Gong J W, et al. Design and comparison of capacitor chargers for solid-state pulsed power modulator[J]. IEEE Transactions on Plasma Science, 2013, 41(10): 2675-2683.
[7] 唐雄民, 刘铮, 彭永进, 等. 移相控制串联谐振式臭氧发生器电源分析[J]. 中国电机工程学报, 2007, 27(24): 17-23.
Tang Xiongmin, Liu Zheng, Peng Yongjin, et al. Research on DBD-type ozonier powered by series resonant inverter with phase shifting control[J]. Proceedings of the CSEE, 2007, 27(24): 17-23.
[8] Nathan B S, Ramanarayanan V. Analysis, simulation and design of series resonant converter for high voltage applications[C]//Proceedings of IEEE Inter- national Conference on Industrial Technology, 2000: 688-693.
[9] Aboushady A A, Ahmed K H, Finney S J, et al. Steady-state analysis of full-bridge series resonant converter with phase-shift and frequency control[C]// IET Conference on Power Electronics, Machines and Drives, Brighton, OK, 2010: 1-6.
[10] Lee C Q, Siri K. Analysis and design of series resonant converter by state-plane diagram[J]. IEEE Transactions on Aerospace and Electronic Systems, 1986, 22(6): 757-763.
[11] Lin J L, Lew J S. Analysis, modeling and robust controller design for a series resonant converter[C]// IEEE Proceedings of 22nd International Conference on Industrial Electronics, Control and Instrument- ation, Taipei, 1996: 665-670.
[12] Feng Weiyi, Lee F C. Optimal trajectory control of LLC resonant converters for soft start-up[J]. IEEE Transactions on Power Electronics, 2014, 29(3): 1461- 1468.
[13] Chen Qichao, Wang Jianze, Ji Yanchao, et al. Soft starting strategy of bidirectional LLC resonant DC-DC transformer based on phase-shift control[C]// 9th IEEE Conference on Industrial Electronics and Applications, Hangzhou, 2014: 318-322.
[14] 张东辉, 严萍. 高压电容器充电电源的研究[J]. 高电压技术, 2008, 34(7): 1450-1455.
Zhang Donghui, Yan Ping. Development in high voltage capacitor charging power supply[J]. High Voltage Engineering, 2008, 34(7): 1450-1455.
[15] 程志远, 朱春波, 魏国, 等. 串-并补偿结构大功率感应充电系统谐振变换器[J]. 电工技术学报, 2014, 29(9): 44-48.
Cheng Zhiyuan, Zhu Chunbo, Wei Guo, et al. Resonant converter for high power ICPT system with series-parallel compensation[J]. Transactions of China Electrotechnical Society, 2014, 29(9): 44-48.
[16] 夏冰, 阮新波, 陈武. 高压大功率场合LCC谐振变换器的分析与设计[J]. 电工技术学报, 2009, 24(5): 60-66.
Xia Bing, Ruan Xinbo, Chen Wu. Analysis and design of LCC resonant converter for high voltage and high power applications[J]. Transactions of China Electrotechnical Society, 2009, 24(5): 60-66.
[17] Bose B K. Expert system, fuzzy logic, and neural network applications in power electronics and motion control[J]. Proceedings of the IEEE, 1994, 82(8): 1303-1323.
[18] 刘栋良, 武瑞斌, 张铁军. 基于模糊控制零电流箝位逆变器死区补偿[J]. 电工技术学报, 2011, 26(8): 119-124.
Liu Dongliang, Wu Ruibin, Zhang Tiejun. Inverter dead rime compensation of zero current clamping based on fuzzy control[J]. Transactions of China Electrotechnical Society, 2011, 26(8): 119-124.
[19] 毕天姝, 倪以信, 吴复立, 等. 基于径向基函数神经网络和模糊控制系统的电网故障诊断新方法[J]. 中国电机工程学报, 2005, 25(14): 12-18.
Bi Tianshu, Ni Yixin, Wu Fuli, et al. Hybrid fault section estimation system with radial basis function neural network and fuzzy system[J]. Proceedings of the CSEE, 2005, 25(14): 12-18.
[20] Viswanathan K, Srinivasan D, Oruganti R. A universal fuzzy controller for a non-linear power electronic converter[C]//Proceedings of the IEEE International Conference on Fuzzy System, Honolulu HI, 2002, 1: 46-51.
[21] So W C, Tse C K, Lee Y S. Development of a fuzzy logic controller for DC/DC converters: design, computer simulation, and experimental evaluation[J]. IEEE Transactions on Power Electronics, 2006, 11(1): 24-32.