功率器件集总参数热路模型及其参数提取研究

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2524 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper,a lumped parameter thermal circuit model is proposed considering the thermal equilibrium principle and the thermal-electrical analogy theory to calculate the operation temperature of power devices with high accuracy.In order to extract equivalent thermal parameters of the proposed model,an experimental platform is designed for measuring the temperature of power devices and the genetic algorithm is employed for thermal circuit model identification.The result shows that the thermal parameters in the lumped thermal circuit model can be identified effectively with the proposed method and the variation law of the thermal parameters with current level and heat sink area can be clearly revealed.Under the condition of known variation law of the parameters,the proposed model can reflect the thermal dynamic process of power devices with high accuracy without obtaining relevant temperature rise profile from experiments.As a consequence,the proposed model is particularly suitable for applying in the occasion where the temperature sensor is difficult to fix and the precision of sensor is prone to drift.

Key words： Lumped parameter thermal circuit model thermal equilibrium principle thermal-electrical analogy genetic algorithm parameter identification

Received: 03 December 2014 Published: 12 November 2015

PACS:

TM315

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wan Meng
	Ying Zhanfeng
	Zhang Xudong
	Wu Junji
	Yang Zhonghao

Cite this article:

Wan Meng,Ying Zhanfeng,Zhang Xudong等. Research on the Lumped Parameter Thermal Circuit Model and the Parameter Extraction Method of Power Devices[J]. Transactions of China Electrotechnical Society, 2015, 30(21): 31-38.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2015/V30/I21/31

[1] Ciappa M.Selected failure mechanisms of modern power modules[J].Microelectronics Reliability,2002,42(4-5):653-667.
[2] 唐勇,汪波,陈明,等.高温下的IGBT可靠性与在线评估[J].电工技术学报,2014,29(6):17-23.
Tang Yong,Wang Bo,Chen Ming,et al.Reliability and on-line evaluation of IGBT modules under high temperature[J].Transactions of China Electrotechnical Society,2014,29(6):17-23.
[3] Murdock D A,Torres J E R,Connors J J,et al.Active thermal control of power electronic modules[J].IEEE Transactions on Industry Applications,2006,42(2):552-558.
[4] Andresen M,Liserre M.Impact of active thermal management on power electronics design[J].Microelectronics Reliability,2014,54(9-10):1935-1939.
[5] Blasko V,Lukaszewski R,Sladky R.On line thermal model and thermal management strategy of a three phase voltage source inverter[C].Conference Record of the 1999 IEEE Industry Applications Conference,Phoenix,AZ,1999,2:1423-1431.
[6] Szabo P,Steffens O,Lenz M,et al.Transient junction-to-case thermal resistance measurement methodology of high accuracy and high repeatability[J].IEEE Transactions on Components and Packaging Technologies,2005,28(4):630-636.
[7] Ammous A,Ghedira S,Allard B,et al.Choosing a thermal model for electrothermal simulation of power semiconductor devices[J].IEEE Transactions on Power Electronics,1999,14(2):300-307.
[8] Ciappa M,Fichtner W,Kojima T,et al.Extraction of accurate thermal compact models for fast electro-thermal simulation of IGBT modules in hybrid electric vehicles[J].Microelectronics Reliability,2005,45(9-11):1694-1699.
[9] 陈明,胡安,唐勇,等.绝缘栅双极型晶体管传热模型建模分析[J].高电压技术,2011,37(2):453-459.
Chen Ming,Hu An,Tang Yong,et al.Modeling analysis of IGBT thermal model[J].High Voltage Engineering,2011,37(2):453-459.
[10]Pandya K I,McDaniel W.A simplified method of generating thermal models for power MOSFETs[C].Eighteenth Annual IEEE Symposium Semiconductor Thermal Measurement and Management,San Jose,USA,2002:83-87.
[11]Chen M C,Yu Feixia,Jun Lin,et al.Steady-state and dynamic thermal models for heat flow analysis of silicon-on-insulator MOSFETs[J].Microelectronics Reliability,2004,44(3):381-396.
[12]晏敏,彭楚武,颜永红,等.红外测温原理及误差分析[J].湖南大学学报(自然科学版),2004,31(5):110-112.
Yan Min,Peng Chuwu,Yan Yonghong,et al.Principle and error analysis of infra-red temperature measurement[J].Journal of Hunan University(Natural Sciences),2004,31(5):110-112.
[13]李洪才,陈非凡,董永贵.功率器件散热特性的非稳态测量方法[J].电工技术学报,2012,27(2):114-120.
Li Hongcai,Chen Feifan,Dong Yonggui.An unsteady-state measurement method for charactering heat dissipation properties of power electronic devices[J].Transactions of China Electrotechnical Society,2012,27(2):114-120.
[14]金雍,羊彦,毕强.功率半导体器件温度状态的实时预测技术[J].电工技术学报,2001,16(5):68-72.
Jin Yong,Yang Yan,Bi Qiang.The technique of predicating the running state of power semiconductor units in real time[J].Transactions of China Electrotechnical Society,2001,16(5):68-72.
[15]魏克新,杜明星.基于集总参数法的IGBT模块温度预测模型[J].电工技术学报,2011,26(12):79-84.
Wei Kexin,Du Mingxing.Temperature prediction model of IGBT modules based on lumped parameters method[J].Transactions of China Electrotechnical Society,2011,26(12):79-84.
[16]Kraus R,Mattausch H J.Status and trends of power semiconductor device models for circuit simulation[J].IEEE Transactions on Power Electronic,1998,13(3):452-465.
[17]刘海霞,蒋鹞飞,宋凝芳,等.基于热电类比法的光纤陀螺环模块热分析[J].北京航空航天大学学报,2014,40(5):596-601.
Liu Haixia,Jiang Yaofei,Song Ningfang,et al.FOG ring modules thermal analysis based on thermoelectric analogy[J].Journal of Beijing University of Aeronautics and Astronautics,2014,40(5):596-601.
[18]Swift G,Molinski T S,Lehn W.A fundamental approach to transformer thermal modeling partⅠ:theory and equivalent circuit[J].IEEE Transactions on Power Delivery,2001,16(2):171-175.
[19]刘刚,阮班义,林杰,等.架空导线动态增容的热路法稳态模型[J].高电压技术,2013,39(5):1107-1113.
Liu Gang,Ruan Banyi,Lin Jie,et al.Steady-state model of thermal circuit method for dynamic overhead lines rating[J].High Voltage Engineering,2013,39(5):1107-1113.
[20]胡建辉,李锦庚,邹继斌,等.变频器中的IGBT模块损耗计算及散热系统设计[J].电工技术学报,2009,24(3):159-163.
Hu Jianhui,Li Jingeng,Zou Jibin,et al.Losses calculation of IGBT module and heat dissipation system design of inverters[J].Transactions of China Electrotechnical Society,2009,24(3):159-163.
[21]刘长良,于希宁,姚万业,等.基于遗传算法的火电厂热工程模型辨识[J].中国电机工程学报,2003,23(3):170-174.
Liu Changliang,Yu Xining,Yao Wanye,et al.Model identification of power plant thermal process based on genetic algorithm[J].Proceedings of the CSEE,2003,23(3):170-174.
[22]Leite J V,Avila S L,Batistela N J,et al.Real coded genetic algorithm for Jiles-Atherton model parameters identification[J].IEEE Transactions on Magnetics,2004,40(2):888-891.
[23]张尧,周鑫,牛海清,等.单芯电缆热时间常数的理论计算与试验研究[J].高电压技术,2009,35(11):2801-2806.
Zhang Yao,Zhou Xin,Niu Haiqing,et al.Theoretical calculation and experimental research on thermal time constant of single-core cables[J].High Voltage Engineering,2009,35(11):2801-2806.