无线电能传输系统中组合串绕六边形线圈的互感建模及参数优化

doi:10.19595/j.cnki.1000-6753.tces.212041

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (9082 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The coupler is the core component realizing the efficient and reliable operation of the wireless power transfer (WPT) system, and its high anti-misalignment performance is a key issue to be solved urgently to promote the application and development of WPT technology. Due to the uncertainty of the position of the receiving coil, the misalignment problem will inevitably exist between the transmitter and the receiver in actual operation, causing the mutual inductance of the traditional coupler to decrease, resulting in a significant decrease in the transmission efficiency and power of the WPT system. The traditional coupler adopts a monotonic winding method to meet various application scenarios, and the analysis of coupling characteristics mainly relies on magnetic circuit models and finite element analysis methods, which are cumbersome, inefficient, and not universal. In order to improve the misalignment tolerance and robustness of WPT system, it is necessary to study the high anti-misalignment coupler, establish its mutual inductance model and multi-parameter optimization method.
Firstly, taking hexagonal coil as an example, the spatial distribution of magnetic flux density of tightly wound, loosely wound and combined series wound coil is compared and analyzed. A design idea of a combined series wound hexagonal coil coupler is provided, which derive from the distribution characteristics of the magnetic flux density and their respective advantages of tightly wound coils and loosely wound coils. On this basis, the mutual inductance and self-inductance models of the proposed coupler are established using electromagnetic theory. The influence mechanism of transmission distance and lateral misalignment on the coupling coefficient are also analyzed, and the correctness of the models is verified by Maxwell software simulation. In order to further optimize the parameters of the coupler, the maximum coupling coefficient is taken as the optimization objective, and taking the coil self-inductance and the inner and outer diameter, the number of turns, and the turn spacing as the constraints. The genetic algorithm is used to realize the adaptive optimization of the multiple coil parameters. In addition, considering the cost and transmission efficiency, different core layout schemes are compared and analyzed. Finally, a 100 W experimental prototype is built using GaN power switch GS66508B to verify the effectiveness of the proposed coupling mechanism and its parameter optimization method.
The results showed that the magnetic flux density of the combined series wound coupler is still dense on both sides, and can made up for the weak magnetic flux density in the central region. The spatial distribution is more uniform than tightly wound and loosely wound, which is beneficial to improve the coupling coefficient and anti-misalignment ability of the coupler. Genetic algorithm can realize the adaptive optimization of multiple parameters of coupler quickly and has strong universality. After optimization, the transmission efficiency of WPT system is increased by 4.2%. In addition, adding ferrite core can further improve the transmission efficiency of the combined series wound hexagonal coil WPT system. On the basis of the above research, the influence of magnetic core and shielding material on mutual inductance between coils can be comprehensively considered in the future, so as to further improve the structure and analysis model of the coupler.

Key words： Wireless power transfer hexagonal coil mutual inductance model genetic algorithm parameter optimization

Received: 15 December 2021

PACS:

TM724

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Tan Ping'an
	Xu Wenhao
	Shangguan Xu
	Wu Yanming
	Liu Huadong

Cite this article:

Tan Ping'an,Xu Wenhao,Shangguan Xu等. Mutual Inductance Modeling and Parameter Optimization of Wireless Power Transfer System with Combined Series-Wound Hexagonal Coils[J]. Transactions of China Electrotechnical Society, 2023, 38(9): 2299-2309.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.212041 OR https://dgjsxb.ces-transaction.com/EN/Y2023/V38/I9/2299

[1] 张波, 疏许健, 黄润鸿. 感应和谐振无线电能传输技术的发展[J]. 电工技术学报, 2017, 32(18): 3-17.
Zhang Bo, Shu Xujian, Huang Runhong.The development of inductive and resonant wireless power transfer technology[J]. Transactions of China Electrotechnical Society, 2017, 32(18): 3-17.
[2] 李阳, 石少博, 刘雪莉, 等. 磁场耦合式无线电能传输耦合机构综述[J]. 电工技术学报, 2021, 36(增刊2): 389-403.
Li Yang, Shi Shaobo, Liu Xueli, et al.Overview of magnetic coupling mechanism for wireless power transfer[J]. Transactions of China Electrotechnical Society, 2021, 36(S2): 389-403.
[3] 卿晓东, 苏玉刚. 电场耦合无线电能传输技术综述[J]. 电工技术学报, 2021, 36(17): 3649-3663.
Qing Xiaodong, Su Yugang.An overview of electric-filed coupling wireless power transfer technology[J]. Transactions of China Electrotechnical Society, 2021, 36(17): 3649-3663.
[4] Patil D, McDonough M K, Miller J M, et al. Wireless power transfer for vehicular applications: overview and challenges[J]. IEEE Transactions on Transportation Electrification, 2018, 4(1): 3-37.
[5] 李中启, 李上游, 李晶, 等. 动态无线电能传输系统多接收线圈正反串联结构的互感计算与优化[J]. 电工技术学报, 2021, 36(24): 5153-5164.
Li Zhongqi, Li Shangyou, Li Jing, et al.Mutual inductance calculation and optimization of multi-receiver positive and negative series coil structure in dynamic wireless power transfer systems[J]. Transactions of China Electrotechnical Society, 2021, 36(24): 5153-5164.
[6] Li Hongchang, Wang Kangping, Huang Lang, et al.Coil structure optimization method for improving coupling coefficient of wireless power transfer[C]//2015 IEEE Applied Power Electronics Conference and Exposition, Charlotte, NC, USA, 2015: 2518-2521.
[7] Moon S C, Moon G W.Wireless power transfer system with an asymmetric four-coil resonator for electric vehicle battery chargers[J]. IEEE Transactions on Power Electronics, 2016, 31(10): 6844-6854.
[8] Tran D H, Vu V B, Choi W.Design of a high-efficiency wireless power transfer system with intermediate coils for the on-board chargers of electric vehicles[J]. IEEE Transactions on Power Electronics, 2018, 33(1): 175-187.
[9] 陈飞彬, 麦瑞坤, 李勇, 等. 基于中继线圈切换的三线圈结构WPT系统效率优化研究[J]. 中国电机工程学报, 2019, 39(21): 6373-6383.
Chen Feibin, Mai Ruikun, Li Yong, et al.Efficiency optimization of three-coil structure WPT systems based on relay coil switching[J]. Proceedings of the CSEE, 2019, 39(21): 6373-6383.
[10] 张巍, 陈乾宏, Wong S C, 等. 新型非接触变压器的磁路模型及其优化[J]. 中国电机工程学报, 2010(27): 108-116.
Zhang Wei, Chen Qianhong, Wong S C, et al.Reluctance circuit and optimization of a novel contactless transformer[J]. Proceedings of the CSEE, 2010(27): 108-116.
[11] Luo Zhichao, Wei Xuezhe.Analysis of square and circular planar spiral coils in wireless power transfer system for electric vehicles[J]. IEEE Transactions on Industrial Electronics, 2018, 65(1): 331-341.
[12] Budhia M, Covic G A, Boys J T.Design and optimization of circular magnetic structures for lumped inductive power transfer systems[J]. IEEE Transactions on Power Electronics, 2011, 26(11): 3096-3108.
[13] Zaheer A, Covic G A, Kacprzak D.A bipolar pad in a 10-kHz 300-W distributed IPT system for AGV applications[J]. IEEE Transactions on Industrial Electronics, 2014, 61(7): 3288-3301.
[14] 关就. 多维旋转式无线输电装置的研究与设计[D]. 广州: 华南理工大学, 2014.
[15] Tan Pingan, Peng Tao, Gao Xieping, et al.Flexible combination and switching control for robust wireless power transfer system with hexagonal array coil[J]. IEEE Transactions on Power Electronics, 2021, 36(4): 3868-3882.
[16] 戴欣, 李璐, 余细雨, 等. 基于正四面体的无线电能传输系统多自由度电能拾取机构[J]. 中国电机工程学报, 2016, 36(23): 6460-6467, 6612.
Dai Xin, Li Lu, Yu Xiyu, et al.Multi-degree-of-freedom pick-up mechanism of wireless power transfer systems based on the regular tetrahedron[J]. Proceedings of the CSEE, 2016, 36(23): 6460-6467, 6612.
[17] 谭平安, 刘春霞, 叶良伟, 等. 多发射切换式无线电能传输系统耦合特性机理分析[J]. 电工技术学报, 2018, 33(22): 5244-5253.
Tan Ping'an, Liu Chunxia, Ye Liangwei, et al.Coupling mechanism analysis for multi-transmitter switching wireless power transfer system[J]. Transactions of China Electrotechnical Society, 2018, 33(22): 5244-5253.
[18] 吴德会, 何天府, 王晓红, 等. 感应电能传输中矩形螺线线圈互感耦合的解析建模与分析[J]. 电工技术学报, 2018, 33(3): 680-688.
Wu Dehui, He Tianfu, Wang Xiaohong, et al.Analytical modeling and analysis of mutual inductance coupling of rectangular spiral coils in inductive power transfer[J]. Transactions of China Electrotechnical Society, 2018, 33(3): 680-688.
[19] Bosshard R, Kolar J W, Mühlethaler J, et al.Modeling and η-α-Pareto optimization of inductive power transfer coils for electric vehicles[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2015, 3(1): 50-64.
[20] Xu Qi, Hu Quankun, Wang Hao, et al.Optimal design of planar spiral coil for uniform magnetic field to wirelessly power position-free targets[J]. IEEE Transactions on Magnetics, 2021, 57(2): 1-9.
[21] Mohan S S, del Mar Hershenson M, Boyd S P, et al. Simple accurate expressions for planar spiral inductances[J]. IEEE Journal of Solid-State Circuits, 1999, 34(10): 1419-1424.