模块化输入串联输出串联高压直流组合系统分布式均压控制策略

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1011 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Input-series and output-series(ISOS) system is very suitable for high input-voltage and high output-voltage applications. Input voltage sharing and output voltage sharing of the constituent modules among the ISOS system must be ensured. This paper proposes a novel distributed voltage sharing control strategy featuring high modularity. In order to ensure proper sharing of input and output voltages, the input voltage sensing signal is added to reference voltage V_ref for each module, resulting in the positive output voltage gradient regulation characteristic of ISOS system, which can be improved by introducing an output voltage correction link. The proposed control strategy can effectively improve the modularity and reliability of ISOS system. An ISOS system prototype consisting of three two-transistor forward converter modules is tested in the lab and the experimental results verify the effectiveness of the proposed control strategy.

Key words： Input-series output-series(ISOS) input voltage sharing modularity distributed control

Received: 18 June 2013 Published: 13 April 2015

PACS:

TM721.1

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Chen Wu
	Cao Yuanzhi
	Cui Hongfen
	Wang Guangjiang
	He Xiaokun

Cite this article:

Chen Wu,Cao Yuanzhi,Cui Hongfen等. Modular Input-Series Output-Series DC High Voltage System with Distributed Voltage Sharing Control Strategy[J]. Transactions of China Electrotechnical Society, 2015, 30(3): 187-195.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2015/V30/I3/187

[1] 陈武, 阮新波, 颜红. DC/DC 多模块串并联组合系统控制策略[J]. 电工技术学报, 2009, 24(7): 93-102. Chen Wu, Ruan Xinbo, Yan Hong. Control strategy for DC/DC multiple modules series-parallel combined systems[J]. Transactions of China Electrotechnical Society, 2009, 24(7): 93-102.
[2] 李锐, 蔡涛, 段善旭, 等. 模块化直流电源系统CAN 网络的设计与实现[J]. 电工技术学报, 2011, 26(1): 182-187. Li Rui, Cai Tao, Duan Shanxu, et al. Design and implementation of CAN-bus in modular DC-DC power system[J]. Transactions of China Electrotech- nical Society, 2011, 26(1): 182-187.
[3] 陈杰, 刁利军, 林文立, 等. 输入串联输出并联全桥变换器的无电流传感器均压均流控制策略[J]. 电工技术学报, 2012, 27(6): 126-130. Chen Jie, Diao Lijun, Lin Wenli, et al. Voltage sharing and sensor-less current sharing control strategy of ISOP full-bridge converter[J]. Transactions of China Electrotechnical Society, 2012, 27(6): 126-130.
[4] Inoue S, Akagi H. A bidirectional isolated DC-DC converter as a core circuit of the next-generation medium-voltage power conversion system[J]. IEEE Transactions on Power Electronics, 2007, 22(2): 535- 542.
[5] 陆治国, 刘捷丰, 郑路遥, 等. 输入串联输出串联高增益Boost变换器[J]. 中国电机工程学报, 2010, 30(30): 27-31. Lu Zhiguo, Liu Jiefeng, Zheng Luyao, et al. Input- series output-series high gain boost converter[J]. Proceedings of the CSEE, 2010, 30(30): 27-31.
[6] Giri R, Ayyanar R, Ledezma E. Input-series and output- series connected modular DC-DC converters with active input voltage and output voltage sharing[C]. IEEE Applied Power Electronics Conference and Exposi- tion, 2004: 1751-1754.
[7] Merwe J, Mouton H. An investigation of the natural balancing mechanisms of modular input-series-output- series DC-DC converters[C]. Proceedings of IEEE Energy Conversion Congress and Exposition, 2010: 817-822.
[8] Lu Q, Yang Z, Lin S, et al. Research on voltage sharing for input-series-output-series phase-shift full- bridge converters with common-duty-ratio[C]. Procee- dings of IEEE Industrial Electronics Society, 2011: 1548-1553.
[9] Sha D, Deng K, Liao X. Duty cycle exchanging control for input-series-output-series connected two PS-FB DC-DC converters[J] IEEE Transactions on Power Electronics, 2012, 27(3): 1490-1501.