异步电机参数离线辨识改进算法

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (762 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to implement self-commissioning of the frequency-variable speed-adjustable system, an improved off-line parameter identification algorithm for induction motors (IMs) is proposed in this paper. Most of motor parameters which directly related to speed sensorless stator-flux-oriented vector control are estimated using the improved algorithm. Stator resistance is estimated by modified DC test. The equivalent control circuit of the DC test is obtained by analyzing switch states of the inverter. Rotor resistance and total leakage inductance are estimated by single-phase locked-rotor test. The stable operating condition of the single-phase test is also deduced by the phasor graph of the induction motor. Stator self-inductance is estimated by constant V/f no-load test. Stator frequency is compensated to eliminate possible oscillation of stator currents in V/f no load test. The stator voltages are constructed by DC voltage and PWM signal’s duty ratios. The voltage errors due to inverter’s dead time are also compensated according to motor current polarity. The experiments of parameter identification and speed sensorless vector control are performed on two induction motors with different rated power. All results indicate that the identification results are insensitive to DC voltage and furthermore the exactness of the estimated parameters can meet the requirements for the speed sensorless vector control.

Key words： Off-line parameter identification induction motor speed sensorless vector control stator-flux-oriented control

Received: 02 November 2010 Published: 07 March 2014

PACS:	TM343
	TM921

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2011/V26/I6/73

[1] Zeraoulia M, Benbouzid M El H, Diallo D. Electric motor drive selection issues for HEV propulsion systems: a comparative study[J]. IEEE Transactions on Vehicular Technology, 2006, 55(6): 1756-1764.
[2] 李珂, 张承慧, 崔纳新. 电动汽车电驱动系统高速区快响应控制策略[J]. 电工技术学报, 2007, 22(6): 41-47.
[3] Nayeem Hasan S M, Husain I. A Luenberger-sliding mode observer for online parameter estimation and adaptation in high-performance induction motor drives[J]. IEEE Transaction on Industry Applications, 2009, 45 (2): 772-781.
[4] Suman M, Chandan C, Yoichi H, Minh C Ta, Model reference adaptive controller-based rotor resistance and speed estimation techniques for vector controlled induction motor drive utilizing reactive power[J]. IEEE Transactions on Industrial Electronics, 2008, 55(2): 594-601.
[5] 金海, 黄进. 基于模型参考方法的感应电机磁链的自适应观测及参数辨识[J]. 电工技术学报, 2006, 21(1): 65-69.
[6] 余功军, 钟彦儒, 杨耕. 无速度传感器矢量控制系统中的电机参数辨识[J]. 电气传动, 1999, 29(1): 7-10.
[7] Lin Y N, Chen C L. Automatic IM parameter measurement under sensorless field-oriented control[J]. IEEE Transactions on Industry Electronics, 1999, 46(1): 111-118.
[8] 刘洋, 赵金, 王庆义. 间接矢量控制系统中的异步电动机参数辨识[J]. 电工技术学报, 2008, 23(7): 21-26.
[9] 罗慧, 刘军锋, 万淑芸. 感应电机参数的离线辨识[J]. 电气传动, 2006, 36(11): 14-19.
[10] Xu X, Novotny D W. Implementation of direct stator flux orientation control on a versatile DSP based system[J]. IEEE Transactions on Industry Applications, 1991, 27(4): 694-700.
[11] Chen W, Yang R F, Yu Y, et al. A novel stability improvement method for V/F controlled induction motor drive systems[C]. International Conference on Electrical Machines and Systems, 2008: 1073-1076.
[12] 陈硕, 薛昭武. 电压型PWM逆变器输出误差分析及其补偿[J]. 电工技术学报, 2001, 16(2): 51-55.
[13] Ohtani T, Takada N, Tanaka K. Vector control of induction motor without shaft encoder[J]. IEEE Transactions on Industry Applications, 1992, 28(1): 157-164.