低定子频率下消除电流测量误差的磁链观测器

Abstract
Figure/Table
References
Related Citation (1)

Download: PDF (426 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract As higher performance of control system is required, current measurement error seriously affected the control performance of electrically excited synchronous motor. The errors generated from the current measurement path are inevitable, such as offset currents and gain deviations, which causes the periodic rotor speed ripples. This paper presents a simple resonant type observer to compensate current measurement errors for the pure-integration-based flux estimation at a low stator frequency. The technique further contains a residual error compensator to eliminate miscellaneous residual error of the integrator. Finally, this paper uses the Matlab/Simulink to simulate excited synchronous motor with two phase current sensors. The simulation results show the effectiveness of the proposed scheme.

Key words： Current measurement error resonant type observer (RTO) pure integration based flux acquisition electrically excited synchronous motor (ESM)

Received: 01 November 2010 Published: 07 March 2014

PACS:

TM341

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhou Erlei
	Fu Xiao
	Wu Xiaojie
	Dai Peng

Cite this article:

Zhou Erlei,Fu Xiao,Wu Xiaojie等. Flux Observer for Elimination of Current Measurement Error at Low Stator Frequency[J]. Transactions of China Electrotechnical Society, 2011, 26(6): 67-72.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2011/V26/I6/67

[1] 李崇坚. 交流同步电动机调速系统[M]. 北京: 科学出版社, 2006.
[2] Holtz J, Quan J. Drift and parameter-compensated flux estimator for persistent zero-stator-frequency operation of sensorless controlled induction motors[J]. IEEE Transactions on Industry Applications, 2003, 39(4): 1052-1060.
[3] Joachim Holtz, Juntao Quan. Sensorless vector control of induction motors at very low speed using nonlinear inverter model and parameter identification[J]. IEEE Transactions on Industry Applications, 2002, 38(4): 1087-1095.
[4] 李永东. 交流电机数字控制系统[M]. 北京: 机械工业出版社, 2002.
[5] Hu Jun, Wu Bin. New integration algorithms for estimating motor flux over a wide speed range[J]. IEEE Transactions on Power Electronics, 1998, 13(5): 969-977.
[6] Guidi G, Umida H. A novel stator resistance estimation method for speed sensorless induction motor drives[J]. IEEE Transactions on Industry Applications, 2000, 36(2): 1619-1627.
[7] Chung D W, Sul S K. Analysis and compensation of current measurement error in vector controlled AC motor drives[J]. IEEE Transactions on Industry Applications, 1998, 34(2): 340-345.
[8] Cho K R, Seok J K. Correction on current measurement errors for accurate flux estimation of AC drives at low stator frequency[J]. IEEE Transactions on Industry Applications, 2007, 44(2): 845-851.
[9] Cho K R, Seok J K. Correction on current measurement errors for accurate flux estimation of AC drives at low stator frequency[J]. IEEE Transactions on Industry Applications, 2008, 44(2): 594-603.
[10] Cho K R, Seok J K. Pure integration based flux acquisition with drift and residual error compensation at a low stator frequency[J]. IEEE Transactions on Industry Applications, 2009, 45(4): 1276-1285.
[11] Jung H S, Hwang S H. Diminution of current measurement error for vector-controlled ac motor drives[J]. IEEE Transactions on Industry Applications, 2006, 42(5): 1249-1256.
[12] Joachim Holtz. Sensorless control of induction motor drives[J]. Proceedings of the IEEE, 2002, 90(8): 1359-1394.
[13] Joachim Holtz. Sensorless control of induction machines—with or without signal injection[J]. IEEE Transactions on Industrial Electronics, 2006, 53(1): 07-30.
[14] 马小亮. 高性能变频调速及其典型控制系统[M]. 北京: 机械工业出版社, 2010.