|
|
|
| Research on Reliability Tolerance Design Technique for the Constant-Current Power Supply of LEDs Used on Street Lamp |
| Zhai Guofu, Hu Bo, Zhang Binrui, Wang Shujuan |
| Harbin Institute of Technology Harbin 150001 China |
|
|
|
|
Abstract The stability and consistency of the output current of the constant-current power supply (CCPS) of light emitting diodes (LEDs) used on street lamps directly affect the reliability of the lighting system. The components' parameters of the CCPS are influenced by internal and external disturbance factors, which cause the fluctuations of current output. This paper firstly introduces an improved method of reliability tolerance design. This method adopts a series of mathematical approaches in the procedure of tolerance design, such as orthogonal experiment, uniform experiment and regression analysis. Then, the model of constant-current power supply of LEDs used on street lamps is established and simulated using Orcad/Pspice and the method of reliability tolerance design is applied on the constant-current power supply of LEDs. Finally, the stability and consistency of the output current are ensured. This method can significantly alleviate the workload of tolerance design.
|
|
Received: 20 February 2010
Published: 07 March 2014
|
|
|
|
|
|
[1] Femia N, Spagnuolo G. Reliable Worst-case tolerance design of feedback regulated DC-DC converters by evolutionary algorithms and interval arithmetic[C]. IEEE Annual Power Electronics Specialists Conference, 2002: 1728-1732.
[2] 王淑娟, 翟国富, 陈博, 等. 电子线路可靠性容差分析方法及其应用的研究[J]. 电子器件, 2002, 25(3): 296-300.
[3] 王淑娟, 张辉, 高宏亮. 基于正交试验设计的电子镇流器参数优化设计方法的研究[J]. 电子器件, 2004, 27(3): 402-408.
[4] 张毅坤, 王海玲, 徐平, 等. 均匀设计在开关电源可靠性参数设计中的应用[J]. 电力电子技术, 2000, 34(3): 19-22.
[5] Wang Shujuan, Sha Youtao, Zhang Hui, et al. Method of reliability tolerance design based on EDA technology and its application on DC hybrid contactor[J]. Journal of Zhejiang University Science. A, 2007, 8(3): 426- 433.
[6] 沙友涛, 王淑娟, 翟国富. 电路容差设计方法及其在机车司机控制器灭弧装置中的应用[J]. 低压电器, 2008(11): 6-10.
[7] 石君友, 康锐. 基于EDA技术的电路容差分析方法研究[J]. 北京航空航天大学学报, 2001, 27(1): 121- 124.
[8] 凌燮亭. 电路参数的容差分析与设计[M]. 上海：复旦大学出版社, 1991. |
|
|
|
2011, Vol. 26 
