对称跨接电容型LED均流电路

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (780 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper proposes a simple symmetrical crossing capacitors current sharing circuit for multi-string LEDs to solve the current imbalance problem caused by voltage drop tolerance and the negative temperature coefficient of LED, which employs staggered turn-on switches and multi- capacitor charge conservation. The operating principle and parameter design of the topology are analyzed in detail and make a comparison with the unsymmetrical crossing capacitors current sharing circuit. On this basis, three-string current sharing topology was validated by experiments and relative experimental waveforms are presented, which show that the proposed circuit has good effect on current sharing while the effect isn’t affected by the output voltage of each branch, and has the advantages of low voltage stress, non-magnetic components, ease of integration and simple control.

Key words： High brightness light-emitting diode(LED) current sharing crossing capacitor lighting backlight

Received: 01 April 2012 Published: 05 November 2014

PACS:

TN27

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yu Yijie
	Zhang Fanghua
	Ni Jianjun

Cite this article:

Yu Yijie,Zhang Fanghua,Ni Jianjun. Symmetrical Crossing Capacitor Current Sharing Circuit for Multi-string LEDs[J]. Transactions of China Electrotechnical Society, 2014, 29(8): 196-203.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2014/V29/I8/196

[1] Lamar D G, Zuniga J S, Alonso A R, et al. A very simple control strategy for power factor correctors driving high-brightness LEDs[J]. IEEE Transactions on Power Electronics, 2009, 24(8): 2032-2042.
[2] Ye Z, Greenfeld F, Liang Z. Design considerations of a high power factor SEPIC converter for high brightness white LED lighting applications[C]. Power Electronics Specialists Conference, Rodes, Greece, 2008: 2657-2663.
[3] Zhou K, Zhang J G, Yuvarajan S, et al. Quasiactive power factor correction circuit for HB LED driver[J]. IEEE Transactions on Power Electronics, 2008, 23(3): 1410-1415.
[4] Datasheets of Cree’s LED Components [EB/OL]. Available at: http://www.cree.com/products/ledlamps. asp.
[5] Chiu C L, Chen K H. A high accuracy current- balanced control technique for LED backlight[C]. Power Electronics Specialists Conference, Rodes, Greece, 2008: 4202-4206.
[6] Hu Y, Jovanovic M M. LED driver with self-adaptive drive voltage[J]. IEEE Transactions on Power Electronics, 2008, 23(6) : 3116-3125.
[7] Chiu H J, Lo Y K, Chen J T, et al. A high-efficiency dimmable LED driver for low-power lighting applications[J]. IEEE Transactions on Industrial Electronics, 2010, 57(2): 735-743.
[8] Doshi M, Zane R. Control of solid-state lamps using a multiphase pulsewidth modulation technique[J]. IEEE Transactions on Power Electronics, 2010, 25(7): 1894-1904.
[9] Chen C C, Wu C Y, Wu T F. Fast transition current- type burst mode dimming control for the LED backlight driving system of LCD TV[C]. Power Electronics Specialists Conference, Jeju, South Korea, 2006: 1-7.
[10] Jacobs J, Shen J, Hente D. A simple digital current controller for solid-state lighting[C]. Power Electronics Specialists Conference, Rodes, Greece, 2008: 2417- 2422.
[11] Hu Q, Zane R. LED driver circuit with series- input- connected converter cells operating in continuous conductionmode[J]. IEEE Transactions on Power Electronics , 2010, 25(3): 574-582.
[12] Thomas W, Pforr J. A novel low-cost current-sharing method for automotive LED-lighting systems[C]. European Conference on Power Electronics and Applications, Barcelona, Spain, 2009: 1-10.
[13] Hwu K I, Yau Y T. Applying one-comparator counter-based sampling to current sharing control of multi-channel LED strings[C]. 2010 IEEE 25th Annual Applied Power Electronics Conference and Exposition, Palm Springs, California, 2010: 737-742.
[14] Lin Changhua, Hung Tsungyou, Wang Chienming, et al. A balancing strategy and implementation of current equalizer for high power LED backlighting[C]. The Seventh International Conference on Power Electronics and Drive Systems, Bangkok, Thailand, 2007: 1613- 1617.
[15] Chiu Huangjen, Cheng Shihjen. LED backlight driving system for large-scale LCD panels[J]. IEEE Transactions on Industrial Electronics, 2007, 54(5): 2751-2760.
[16] Chen Chienchih, Wu Changyu, Chen Yaowming, et al. Sequential color LED backlight driving system for LCD panels[J]. IEEE Transactions on Power Electronics, 2007, 22(3): 919-925.
[17] Shiniki Sawada, Takayuki Shimizu. LED drive circuit, LED lighting device, and backlight: US Pat, 2010/ 7408308 B2[P]. Aug. 2008.
[18] Huang C T, Yan S J, Cheng C C, et al. Power supply circuit with current sharing for driving multiple sets of dc loads: US Pat, 2009/0195169[P]. Aug. 2010.
[19] Hu Yuequan, Jovanović M M. A new current- balancing method for paralleled LED strings[C]. Applied Power Electronics Conference and Exposition, Fort Worth, Texas, 2011: 705-712.
[20] Sungjin Choi, Taehoon Kim. Symmetric current- balancing circuit for led backlight with dimming[J]. IEEE Transactions on Power Electronics, 2012, 59(4): 1698-1707.
[21] 张军明, 汪剑峰, 吴新科, 等. 电流自平衡的多路输出谐振变流器: 中国, 201010287918.0[P]. 2011- 01-19.
[22] 葛良安, 姚晓莉, 华桂潮, 等. 一种适用于多路LED恒流驱动的电路: 中国, 2009202733 52.9[P]. 2010-09-15.
[23] 杨恒. LED照明驱动器设计步骤详解[M]. 北京: 中国电力出版社, 2009.