|
|
|
| Principle of Integrating Electromagnetically Induced Acoustic Emission with Electromagnetic Ultrasonic Testing and Design of Exciting Coil |
| Cai Zhichao1,Liu Suzhen1,Jin Liang2,Zhang Chuang1,Yang Qingxin1,2 |
1. Province-Ministry Joint Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability Hebei University of Technology Tianjin 300130 China
2.Key Laboratory of Advanced Electrical Engineering and Energy Technology Tianjin Polytechnic University Tianjin 300387 China |
|
|
|
|
Abstract The brittle and fatigue fracture caused by micro-crack and fatigue damage often happen suddenly in the aluminum alloy plate surface,and even results in a catastrophic accident. A composite nondestructive testing (NDT) method is presented which integrates electromagnetically induced acoustic emission (EMAE) with electromagnetic acoustic transducer (EMAT). The surface and sub-surface defects can be detected by this nondestructive method without adding the special exciting circuits and coils. This method makes up for the inadequate and unreliable detection in the key position by a single detection. The exciting coil of the composite nondestructive testing method is designed which suits to EMAE and EMAT. The finite element method (FEM) is used for the simulation. The simulation results show that the proposed coil model is valid for application.
|
|
Received: 20 September 2012
Published: 11 December 2013
|
|
|
|
|
|
[1] Ogi H. Field dependence of coupling efficiency between electromagnetic field and ultrasonic bulk waves[J]. J. App1. Phys. 1997, 82(8): 3940-3949.
[2] Hensman J, Pullin R, Meaton, et al, Detecting and identifying artificial acoustic emission signals in an in industrial fatigue environment [J]. Measurement Science and Technology, 2009, 20(4): 251-260.
[3] Finkel P, Godinez V, Miller R. Electromagnetically induced acoustic emission#x02014;novel NDT technique for damage evaluation[J]. American Institute of Physics Conf. Proc. 2001, 557: 1747-1754.
[4] Finkel P, Godinez V. Numerical simulations of an electromagnetic of the ultrasonic signal for nondestructive detection of ferromagnetic inclusions and flaws [J]. IEEE Transactions on Magnetics, 2004, 40(4): 2179-2181.
[5] 刘素贞, 杨庆新, 金亮, 等. 电磁声发射技术在无损检测中的应用研究[J]. 电工技术学报, 2009, 24(1): 23-27.
[6] Jin Liang, Yang Qingxin, Liu Suzhen. Electroma- gnetic stimulation of the acoustic emission for fatigue crack detection of the sheet metal[J]. IEEE Transac- tions on Applied Superconductivity, 2010, 20(3): 1848-1854.
[7] 张闯, 刘素贞, 杨庆新, 等. 基于FFT和小波包变换的电磁声发射信号处理[J]. 电工技术学报, 2010, 25(4): 24-28.
[8] 康宜华, 宋凯, 杨建桂, 等. 几种电磁无损检测方法的工作特征[J]. 无损检测, 2008, 30(12): 928-930.
[9] 康磊. 用于铝板检测的电磁超声导波换能器优化设计技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2010.
[10] 任晓可, 李健. 电磁超声无损检测技术的ANSYS仿真研究[J]. 电子测量技术, 2008, 31(8): 44-45.
[11] 金亮. 涡流激励声发射在金属板裂纹检测中的应用研究[D]. 天津: 河北工业大学, 2011. |
|
|
|
2013, Vol. 28 
