|
|
|
| Intelligent Optimization Test Model of Armature Turn-To-Turn Insulation Parameter and Its Application |
| Zhao Yanming1, E Jiaqiang2 |
| 1. Hunan University of Science and Technology Xiangtan 411201 Chin 2. Hunan University Changsha 410082 China |
|
|
|
|
Abstract In order to reduce the error brought by traditional test method, a test model of armature turn-to-turn insulation parameter is established based on its measurement mechanism in the paper, and its parameters adjustment by using function link neural network and chaos optimization algorithm are introduced. The application results reveal that the relative error of the intelligent optimization test model is less than 1%, and is of high accuracy.
|
|
Received: 03 August 2007
Published: 14 February 2014
|
|
|
|
|
|
[1] 温凤香, 吴广宁, 佟来生. 高速机车牵引电机定子绕组匝间电压分布特性的仿真研究[J]. 电工技术学报, 2005, 20(3): 30-35.
[2] 姜风国, 张志新, 童水光．电机匝间绝缘的计算机辅助测试系统[J]. 机电工程, 2005, 22(1): 9-12.
[3] 罗冰洋, 莫易敏, 王旺平. 电机电枢参数智能检测仪的研制[J]. 武汉理工大学学报 (信息与管理工程版), 2005, 27(1): 61-64.
[4] 周洪亮. 智能电枢参数综合测量仪的研制[J]. 仪器仪表学报, 2004, 25(4): 599-660.
[5] 刘孟祥, 钟志华, 龚金科. 基于函数链神经网络的车用发动机气缸压力数据采集系统[J]. 湖南大学学报 (自然科学版), 2007, 34(4): 29-32.
[6] 鄂加强. 铜精炼过程优化建模与智能控制[M]. 长沙: 湖南大学出版社, 2006.
[7] 崔畅, 赵强. 改进的混沌优化算法研究[J]. 科学技术与工程, 2007, 7(3): 307-309.
[8] 梁杰申, 程志珊, 伍云璀．正确使用电机检测中匝间绝缘测试项目[J]. 微特电机, 1999(6): 39-41.
[9] 孙东凯. 匝间耐压测试仪的波形形成机制和工作原理[J]. 中国仪器仪表, 2003, (3): 18-21．
Sun Dongkai. Mechanism of producing wave and working theory for winding dielectric test instrument [J]. Chinese Journal of Scientific Instrument, 2003, (3): 18-21.
[10] 鄂加强, 张华美, 龚金科, 等. 基于函数链神经网络的管道煤气流量计量系统[J]. 中南大学学报 (自然科学版), 2006, 37(5): 976-980. |
|
|
|
2009, Vol. 24 
