Abstract：This paper presents a magneto-thermal model of a high-speed claw pole motor. Core loss is much greater than other losses and is the main source of heat due to the high operating frequency. Therefore it is of crucial importance to be able to calculate the core loss accurately . Three-dimensional finite element analysis is used for core loss calculation and temperature distribution because flux path in claw pole motor is pure three-dimension. The total core loss is computed by separating the alternating and rotational hysteresis, eddy current and anomalous losses in each element. The element's core loss is coupled into elements in thermal analysis by keeping the same mesh structure between magnetic and thermal analysis. Other losses such as air friction loss, rotor loss are included in the model due to high speed. This model is applied to a 2kW, 20kr/min three stack claw pole motor with soft magnetic composite core, and the results are compared and discussed finally.
黄允凯, 胡虔生, 朱建国. 顾及旋转铁耗的高速爪极电机三维磁热耦合分析[J]. 电工技术学报, 2010, 25(5): 54-60.
Huang Yunkai, Hu Qiansheng, Zhu Jianguo. Magneto-Thermal Analysis of a High-Speed Claw Pole Motor Considering Rotational Core Loss. Transactions of China Electrotechnical Society, 2010, 25(5): 54-60.
[1] Zhu J G, Ramsden V S. Improved formulations for rotational core losses in rotating electrical machines[J]. IEEE Transactions on Magnetics, 1998, 34(7): 2234-2242. [2] Aglen O, Andersson A. Thermal analysis of a high-speed generator[C]. Proc. IEEE Int. Electric Machines and Drives Conf., 2003: 547-554. [3] Lamghari Jamal M I, Fouladgar J, Zaim E H, et al. A magneto-thermal study of a high-speed synchronous reluctance machine[J]. IEEE Transactions on Magnetics, 2006, 42(3): 1271-1274. [4] Chun Y, Wei K Y, Wang X N. Coupled-field thermal analysis of high-speed permanent magnetic generator applied in micro-turbine generator[C]. The Eighth International Conference on Electrical Machines and Systems, 2005: 2458-2461. [5] 黄允凯, 朱建国, 胡虔生.软磁复合材料在电机中的应用[J]. 微特电机, 2006, 34(11): 1-3. [6] Huang Y K, Zhu J G, Guo Y G. Design and analysis of a high-speed claw pole motor with soft magnetic composite core[J]. IEEE Transactions on Magnetics, 2007, 43(6): 2492-2494. [7] Bertotti G. General properties of power losses in soft ferromagnetic materials[J]. IEEE Transactions on Magnetics, 1988, 24(1): 621-630. [8] 黄允凯, 胡虔生, 朱建国. 永磁无刷直流电机铁耗计算方法[J]. 电机与控制应用, 2007, 34(4): 6-9. [9] Zhu J G, Zhong J J, Ramsden V S, et al. Power losses of composite soft magnetic materials under two dimensional excitations[J]. Journal of Applied Physics, 1999, 85(4): 4403-4405. [10] Saari J. Thermal analysis of high-speed induction machines[D]. Finland: Helsinki University of Tech- nology, 1998. [11] Zhu Z Q, Ng K, Schofield N, et al. Improved analytical modelling of rotor eddy current loss in brushless machines equipped with surface-mounted permanent magnets[J]. IEE Electrical Power Application, 2004, 151(6): 641-650. [12] Atallah K, Howe D, Mellor P H, et al. Rotor loss in permanent-magnet brushless AC machines[J]. IEEE Trans. on Industry Applications, 2000, 36(6): 1612-1618. [13] Sharkh S M A, Harris M R, Irenji N T. Calculation of rotor eddy current loss in high-speed PM alternators[J]. IEE Electrical Machine Drives, 1997(9): 170-174. [14] SKF. SKF轴承综合型录[R]. 2004. [15] Guo Y G, Zhu J G, Wu W. Thermal analysis of soft magnetic composite motors using a hybrid model with distributed heat sources[J]. IEEE Transactions on Magnetics, 2005, 41(11): 2124-2128. [16] 魏永田, 孟大伟, 温嘉斌. 电机内热交换[M]. 北京: 机械工业出版社, 1998.
2010, Vol. 25 
