Abstract：For the existing problems that system lag, friction, and uncertainty factors in linear permanent magnet synchronous motor drive XY table, a combinative control method of generalized predictive controller(GPC) and disturbance observer(DOB) is put forward. Firstly, through GPC the parameters of system are identified, controlled autoregressive integral moving average model(CARIMA) is established, and then rolling optimization, local optimum of system is sought. Finally feedback is corrected, and system can be calibrated continued. The control lag problem of XY table system is solved. The tracking ability of system is improved. System parameter uncertainty and various nonlinear disturbances are eliminated or weaken by DOB. Robustness of the system is improved. The simulation and experimental results show that the proposed scheme is effective. The tracking performance and robustness of system are improved obviously. So the machining precision of the system is improved.
赵希梅,赵久威,李洪谊. 基于GPC和DOB的直驱XY平台鲁棒跟踪控制[J]. 电工技术学报, 2015, 30(6): 150-154.
Zhao Ximei,Zhao Jiuwei,Li Hongyi. Robust Tracking Control for Direct Drive XY Table Based on GPC and DOB. Transactions of China Electrotechnical Society, 2015, 30(6): 150-154.
[1] 王先逵, 陈定积, 吴丹. 机床进给系统用直线电动机综述[J]. 制造技术与机床, 2001(8): 18-21. Wang Xiankui, Chen Dingji, Wu Dan. Overview of linear motor used in machine tool feeding system[J]. Manufacturing Technology & Machine Tool, 2001(8): 18-21. [2] 赵希梅, 郭庆鼎. 基于ZPETC和CCC的直驱XY平台高精度控制[J]. 组合机床与自动化加工技术, 2011, 2(2): 83-85. Zhao Ximei, Guo Qingding. High precision control based on zero phase error tracking controller and cross-coupled controller for direct drive XY table[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2011, 2(2): 83-85. [3] Kou Baoquan, Wu Hongxing, Li Liyi. Thrust character- ristics investigation of double-side plate permanent magnet linear synchronous motor for EML[J]. IEEE Transactions on Magnetics, 2009(1): 501-505. [4] Chen S L, Hsieh T H. Repetitive control design and implementation for linear motor machine tool[J]. International Journal of Machine Tools and Manufacture, 2007, 47(12): 1807-1816. [5] Jose Vincente Salcedo, Miranzo Martinez. GPC robust design using linear and/or bilinear matrix inequalities [J]. European Journal of Control, 2007, 13(5): 451-467. [6] Jianjun Shi, Atul G Kelkar. Feedback linearization based generalized predictive control of jupiter icy moons orbiter[J]. Journal of Dynamic Systems, Measurement and Control, 2009, 131(1): 1-10. [7] Egiguren P A, Caramazana O B, Etxeberria J A C. Linear generalized predictive position control of induc- tion motor drives[J]. IEEE Industrial Electronics Society, 2011: 1922-1927. [8] Ales Hace, Karel Jezernik, Asif Sabanovic. SMC with disturbance observer for a linear belt drive[J]. IEEE Transactions on Industrial Electronics, 2007, 54(6): 3402-3412. [9] Hideyuki Kobayashi, Seiichiro Katsura, Kouhei Ohnishi. An analysis of parameter variations of disturbance observer for motion control[J]. IEEE Transactions on Industrial Electronics, 2007, 54(6): 3413-3421.
2015, Vol. 30 
