Engineering Research Center of Aerospace Power Technology Ministry of Education Nanjing University of Aeronautics and Astronautics Nanjing 210016 China
Abstract：Based on the three-bridge circuit, several control methods of BLDC are introduced. Six PWM chopped wave methods of three-phase six-beat control are analyzed and compared. Then the Direct Torque Control method of the BLDC is also presented, and the feature and principle of this method are analyzed. According to this traditional DTC method, this paper gives out a revised DTC method without the flux linkage observation. MATLAB is used to simulate this control method. An experiment research is also conducted based on an 850W BLDC control system, and the results are presented to validate the theory.
赵耀, 王慧贞, 陈康, 姚磊. 永磁无刷直流电机的控制方法研究[J]. 电工技术学报, 2013, 28(1增): 321-325.
Zhao Yao, Wang Huizhen, Chen Kang, Yao Lei. A Study About the Control System of BLDCM. Transactions of China Electrotechnical Society, 2013, 28(1增): 321-325.
[1] 黄夫阳. 基于DSP的永磁无刷直流电机的控制[D]. 合肥: 合肥工业大学, 2006. [2] 韦鲲. 永磁无刷直流电机电磁转矩脉动抑制技术的研究[D]. 杭州: 浙江大学, 2006. [3] Rodriguez, Fernando. Advanced digital control techniques for brush-less DC(BLDC) motor drives [D]. Chicago: Illinois Institute of Technology, 2006. [4] Lee Byoung Kuk. Advanced low cost and high performance brushless DC motor drives for mass production[D]. Texas A &M University, 2007. [5] Bolton H R, Liu Y D, Mallison N M. Investigation into a class of brushless DC motor with quasisquare voltages and currents, electric power applications[J]. IEE Proceedings B [see also IEE Proceedings-Electric Power Applications], 2006, 133(2): 103-111. [6] 薛定宇, 陈阳泉. 基于Matlab/Simulink的系统仿真技术与应用[M]. 北京: 清华大学出版社, 2006. [7] Hemati N, Leu M C. A complete model character- rization of brushless DC motors[J]. IEEE Transaction on Industry Applications, 2007, 28(1): 172-180. [8] 郭鹏. 基于DSP的全数字无刷直流电机控制器的设计与研究[D]. 西安: 西北工业大学, 2009. [9] Yoshida M, Murai Y, Takada M. Noise reduction by torque ripple suppression in brushless DC motor[C]. IEEE PESC, 2010, 2: 1397-1401.
2013, Vol. 28 
