Abstract:For the position servo system of permanent magnet synchronous motor(PMSM), a back-stepping based adaptive sliding mode control(ASMC) strategy is proposed in this paper to meet the requirements of strong robustness, high control accuracy, fast and non-overshoot response. The combination of back-stepping and sliding mode control solves the problems of low-accuracy, poor system performance, and weak robustness in the conventional PID design. Meanwhile, the introduction of adaptive mechanism releases the priori knowledge of upper bounds on disturbance and parametric uncertainty. Lyapunov stability theorem is employed to provide the stability analysis of the closed-loop system. Finally, the proposed method is verified on DSP based experimental platform. The experimental results show that the proposed design performs better than conventional PID control with respect to the tracking accuracy, robustness and response speed.
付培华, 陈振, 丛炳龙, 赵静. 基于反步自适应滑模控制的永磁同步电机位置伺服系统[J]. 电工技术学报, 2013, 28(9): 288-293.
Fu Peihua, Chen Zhen, Cong Binglong, Zhao Jing. A Position Servo System of Permanent Magnet Synchronous Motor Based on Back-Stepping Adaptive Sliding Mode Control. Transactions of China Electrotechnical Society, 2013, 28(9): 288-293.
[1] 刘贤兴, 卜言柱, 胡育文, 等. 基于精确线性化解耦的永磁同步电机空间矢量调制系统[J]. 中国电机工程学报, 2007, 27(30): 55-59. Liu Xianxing, Bu Yanzhu, Hu Yuwen, et al. Space vector modulation system for permanent magnet synchronous motor based on precision linearization decoupling[J]. Proceedings of the CSEE, 2007, 27(30): 55-59. [2] 陈振, 耿洁, 刘向东. 基于积分时变滑模控制的永磁同步电机调速系统[J]. 电工技术学报, 2011, 26(6): 56-61. Chen Zhen, Geng Jie, Liu Xiangdong. An integral and exponential time-varying sliding mode control of permanent magnet synchronous motors[J]. Transactions of China Electrotechnical Society, 2011, 26(6): 56-61. [3] 丛炳龙, 刘向东, 陈振. 一种改进的自适应滑模控制及其在航天器姿态控制中的应用[J]. 控制与决策, 2012, 在线出版. Cong Binglong, Liu Xiangdong, Chen Zhen. An improved adaptive sliding mode control for spacecraft attitude control[J]. Control and Decision, 2012, published online. [4] Jing Jiang, Ye Yingying. Design of sliding mode controller for the position servo system[C]. 2011 Chinese Control and Decision Conference (CCDC), 2011: 1016-1020. [5] Boban Veselic, Branislava Perunicic Drazenovic, Cedomir Milosavljevic. High-performance position control of induction motor using discrete-time sliding-mode control[J]. IEEE Transactions on Industrial Electronics, 2008, 55(11): 3809-3817. [6] 辛平, 弭洪涛, 白晶. PMSM 伺服系统参数自适应全局滑模变结构位置控制器设计[J]. 冶金自动化, 2012, 36(4): 69-72. Xin Ping, Mi Hongtao, Bai Jing. Parameters adaptive global SMC position controller for PMSM servo system[J]. Metallurgical Industry Automation, 2012, 36(4): 69-72. [7] Barabones O, Alkorta P, Garrido A J. An adaptive sliding mode control scheme for induction motor drives[J]. International Journal of Circuits, Systems and Signal Processing, 2007, 1(1): 73-78. [8] Kanellakopoulos I, Krein P T, Disilvestro F. Nonlinear flux-observer-based control of induction motors[C]. Proceeding of the 1992 American Control Conference, Chicago, 1992, 1700-1704. [9] Rasmussne H, Vadstrup P, Borsting H. Full adaptive backstepping design of speed sensorless field oriented controller for an induction motor[C]. Conference Record IEEE Industry Applications Society), 2001, 4: 2601- 2606. [10] 于金鹏, 陈兵, 于海生, 等. 基于自适应模糊反步法的永磁同步电机位置跟踪控制[J]. 控制与决策, 2010, 25(10): 1547-1551. Yu Jinpeng, Chen Bing, Yu Haisheng, et al. Adaptive fuzzy backstepping position tracking control for permanentmagnet synchronous motor[J]. Control and Decision, 2010, 25(10): 1547-1551. [11] Chia Hua Lu, Yean Ren Hwang. A study on tracking position control of an pneumatic system by backstepping design[J]. 11th Int. Conf. Control on Automation, Robotics and Vision, Singapore, 2010: 721-726. [12] Faa Jeng Lin, Po Huang Shieh, Po Huan Chou. Robust adaptive backstepping motion control of linear ultrasonic motors using fuzzy neural network[J]. IEEE Transactions on Fuzzy System, 2008, l6(3): 134-145. [13] 张兴华. 永磁同步电机的模型参考自适应反步控制[J]. 控制与决策, 2008, 23(3): 341-345. Zhang Xinghua. Model reference adaptive control for permanent magnet synchronous motors[J]. Control and Decision, 2008, 23(3): 341-345.