Abstract:The method of using feedforward controller to null audio susceptibility, which is the input-output transfer function, has been researched in this paper. A method for simplification of the converter when computing the feedforward controller is presented so that the related components of the circuit can be easily established. When the order of converter’s model is high, its feedforward controller form is complicated. In this paper, the proportional feedforward controller instead of the accurate form is used to realize zero audio susceptibility in certain frequency range. Besides, the accurate feedforward controllers of continuous current converters with two inductors and two capacitors have been analyzed and it shows that the proportional feedforward controller only depends on the DC gain of the converter. The conclusions have been verified by computation and experiment results.
贾鹏宇, 李艳, 王蓓蓓, 郑琼林. 高阶变换器拓扑的前馈控制研究[J]. 电工技术学报, 2013, 28(10): 195-205.
Jia Pengyu, Li Yan, Wang Beibei, Trillion Q Zheng. Research of Feedforward Control on High Order Converter Topologies. Transactions of China Electrotechnical Society, 2013, 28(10): 195-205.
[1] Calderoni L, Pinola L, Varoli V. Optimal feed-forward compensation for PWM DC/DC converters[C]. IEEE Power Electronics Specialists Conference, 1990: 235-241.
[2] Maranesi P G, Tavazzi V, Varoli V. Two-part characterization of PWM voltage regulators at low frequencies[J]. IEEE Transactions on Industrial Electronics, 1988, 35(3): 444-450.
[3] Otto D V. Reduction of switching regulator audio susceptibility to zero[J]. Electronics Letters, 1986, 22(8): 441-442.
[4] Kazimierczuk M K, Massarini A. Feedforward control of DC-DC PWM boost converter[J]. IEEE Transac- tions on Circuits and Systems I: Fundamental Theory and Applications, 44(2): 143-148.
[5] Karppanen M, Suntio T, Sippola M. Dynamical characteriza-tion of input-voltage-feedforward- controlled Buck c0onverter[J]. IEEE Transactions on Industrial Electronics, 2007, 54(2): 1005-1013.
[6] Grigore V, J Kyyra. A step-down converter with low ripple input current for power factor correction[C]. IEEE Applied Power Electronics Conference and Exposition, 2000.
[7] Weaver W W, P T Krein. Analysis and applications of a current-sourced Buck converter[C]. IEEE Applied Power Electronics Conference, 2007.
[8] Suntio T, J Leppaaho, J Huusari. Issues on solar- generator-inter-facing with voltage-fed converter[C]. IEEE Annual Conference of the Industrial Electronics Society, 2009: 595-600.
[9] Karppanen M, Arminen J, Suntio T. Dynamical modeling and characterization of peak-current- controlled superbuck converter[J]. IEEE Transactions on Power Electronics, 2008, 23(3): 1370-1380.
[10] Croci L, Marana C, Poli A. Artemis power subsystem design and performances[C]. Proceedings of Fourth European Space Power Conference, 1995: 175-180.
[11] Jensen H, Laursen J. Power conditioning unit for rosettamars express[C]. Proceedings of Sixth Euro- pean Space Power Conference, 2002.
[12] Spiazzi G, Mattavelli P. Design criteria for power factor preregulators based on sepic and cuk converters in continuous conduction mode[C]. IEEE Industry Applications Society Annual Meeting, 1994.
[13] Tymerski R, Vorperian V. Generation and classification of PWM DC-to-DC converters[J]. IEEE Transactions on Aerospace and Electronic Systems, 1988, 24(6): 743-754.
[14] Williams B W. DC-to-DC converters with continuous input and output power[J]. IEEE Transactions on Power Electronics, 2013, 28(5): 2307-2316.
[15] Mossoba J T. Null audio susceptibility of current- mode buck converters: small signal and large signal perspectives[C]. IEEE Power Electronics Specialist Conference, 2003, 4: 1605- 1611.
[16] Erickson R W, Maksimovic D. Fundamentals of power electro-nics[M]. 2nd ed. Norwell, MA: Kluwer(Academic), 2001.
[17] Tse C K. Linear circuit analysis[M]. Harlow, U.K.: Addison-Wesley-Longman Ltd, 1998: 229.
[18] Hankaniemi M, Karppanen M, Suntio T. Load-imposed instability and performance degradation in a regulated converter[J]. IEE Electric Power Applications, 2006, 153(6): 781-786.