逆变器输出电压模型及新型死区补偿方法

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (366 KB)
输出: BibTeX | EndNote (RIS)

摘要针对电压源型逆变器, 建立了逆变器输出电压的数学模型, 该模型描述了死区时间、功率器件管压降、开通时间、关断时间和相电流对逆变器输出电压的影响。基于该数学模型提出了一种新型的死区补偿方法。在该补偿方法的实现过程中, 需要对电流方向进行精确判断, 为此基于空间矢量角的概念, 提出了一种新型的利用功率因数角实现的电流方向间接检测方法, 该方法能够有效地抑制各种扰动引起的电流方向误判断。最后, 利用TMS320F2812DSP控制器对这种死区补偿方法的性能进行了检验, 实验结果证明了该方法的有效性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	杨立永
	陈智刚
	陈为奇
	李正熙

关键词 ：死区补偿, 异步电动机, 交流调速, 逆变器模型

Abstract：The influence of dead-time on three-phase voltage source inverter output voltage using SVPWM modulation is analyzed in the paper. In order to reduce the voltage distortion, current harmonics and torque ripple caused by the dead time effects, dead-time compensation is needed. This paper presents the method of estimating current vector angle indirectly by power-factor angle, and gives the relationship between the position of output current vector and the direction of three-phase current. On this basis, the compensated voltage value is calculated. At last, in order to test the performances of this method, experiments are carried out using TMS320F2812 controller. The experimental results proved the validity of the proposed method.

Key words： Dead-time compensation induction motor AC drive inverter model

收稿日期: 2009-08-03 出版日期: 2014-03-19

PACS:

TM464

作者简介: 杨立永男, 1974年生, 博士, 副教授, 硕士生导师, 主要从事大功率矢量控制变频器的开发以及风力发电等并网技术的研究。陈智刚男, 1982年生, 硕士, 助教, 主要从事大功率双PWM变频器关键技术以及矢量控制技术的研究。

引用本文:

杨立永, 陈智刚, 陈为奇, 李正熙. 逆变器输出电压模型及新型死区补偿方法[J]. 电工技术学报, 2012, 27(1): 182-187. Yang Liyong, Chen Zhigang, Chen Weiqi, Li Zhengxi. Output Voltage Model of VSI-Inverter and a Novel Dead-Time Compensation Method. Transactions of China Electrotechnical Society, 2012, 27(1): 182-187.

链接本文:

http://dgjsxb.ces-transaction.com/CN/Y2012/V27/I1/182

[1] 陈伯时. 电力拖动自动控制系统[M]. 3版. 北京: 机械工业出版社, 2003. 7.
[2] 王高林, 于泳, 杨荣峰, 等. 感应电机空间矢量PWM控制逆变器死区效应补偿[J]. 中国电机工程学报, 2008, 28(4): 79-83.
Wang Gaolin, Yu Yong, Yang Rongfeng, et al. Dead-time compensation of space vector PWM inverter for induction motor [J]. Proceedings of the CSEE, 2008, 28(4):79-83
[3] 程小猛, 陆海峰, 瞿文龙, 等. 用于逆变器死区补偿的空间矢量脉宽调制策略[J]. 清华大学学报, 2008, 48(7): 1077-1080.
Cheng Xiaomeng, Lu Haifeng, Qu Wenlong, et al. SVPWM strategy for inverter dead-time compensation [J]. Journal of Tsinghua University (Science and Technology), 2008, 22(7): 1077-1080.
[4] 刘军锋, 李叶松. 死区对电压型逆变器输出误差的影响及其补偿[J]. 电工技术学报, 2007, 22(5): 117-122.
Liu Junfeng, Li Yesong. Dead-time influence on output error of voltage source inverter and compensation [J]. Transactions of China Electrote- chnical Society, 2007, 22(5): 117-122.
[5] Kim HyunSoo, Kim KyeongHwa, Youn MyungJoong. On-line dead-time compensation method based on time delay control[J]. IEEE Transaction on Control system Thchnology, 2003, 11(2): 279-285．
[6] 陈小佳, 黄苏融, 洪文成, 等. 基于空间电压矢量的电压前馈死区补偿方法研究与实现[J]. 电机控制与应用, 2009, 36(4): 6-9.
Chen Xiaojia, Huang Surong, Hong Wencheng, et al. Study and implementation of voltage feed-forward dead time compensation method based on SVPWM [J]. Electric Machines and Control Application, 2009, 36(4): 6-9.
[7] 王庆义, 邓歆, 罗慧, 等. 一种新的基于 SVPWM 策略的死区补偿方法[J]. 电气传动, 2008, 38(2): 19-22.
Wang Qingyi, Deng Xin, Luo Hui, et al. New method of dead time compensation based on SVPWM Strategy [J]. Electric Drive, 2008, 38(2): 19-22.
[8] 胡庆波, 吕征宇. 一种新颖的基于空间矢量 PWM 的死区补偿方法[J]. 中国电机工程学报, 2005, 25(3): 13-17.
Hu Qingbo, Lü Zhengyu. A novel method for dead time compensation based on SVPWM [J]. Proceedings of the CSEE, 2005, 25(3): 13-17.
[9] Sukeqawa T, Kamiyama K, Mizuno K, et al. Fully digital vector controlled PWM VSI-fed AC drives with an inverter dead-time compensator strategy[J]. IEEE Transactions on Industry Applications, 1991, 27(3): 552-559．
[10] Mu nozGarcia, Lipo T A. On-line dead-time compensation technique for open-loop PWM-VSI drives[J]. IEEE Transactions on Power Electronics, 1999, 14 (4): 683-689.