考虑材料非线性覆铜实心转子感应电机转子阻抗参数的二维解析计算

doi:10.19595/j.cnki.1000-6753.tces.231569

Abstract
Figure/Table
References
Related Citation (1)

Download: PDF (1447 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper aims to establish the impedance calculation model of nonlinear copper-coated solid rotor induction motors. This model takes into account the magnetic field distortion caused by the non-linearity of the rotor core material. A method of impedance calculation based on an effective magnetization curve is proposed, which can calculate the permeability of the nonlinear rotor core at different slips and reduce the impedance calculation error caused by the non-linearity of the rotor material. Based on the effective magnetization curve, a simplified calculation method of rotor impedance considering temperature change is proposed to estimate the performance of the motor quickly.
First, assuming that the magnetic permeability of the rotor core is a fixed value, the vector magnetic potential in the rotor surface domain is solved using the two-dimensional subdomain method of electromagnetic field on the copper-coated solid rotor model. Then, the analytical expression of the rotor core and the total impedance of the rotor is obtained. A method considering the nonlinearity of the rotor core material is proposed to calculate the magnetic permeability of the rotor core by equivalent magnetic field energy conservation from the original magnetization curve of nonlinear materials. The effective magnetization curve is obtained, and the permeability is calculated under different slips.
The rotor core, rotor total impedance, electromagnetic torque, and power factor are calculated using the two-dimensional time-harmonic finite element method, effective magnetization curve analysis method, and original magnetization curve analysis method. The results show that the effective magnetization curve analysis method is more accurate than the original magnetization curve analysis method, especially at the stable operating point with a small slip.
The resistivity and effective magnetization curve of the rotor copper layer and core at 200℃ are applied to the analytical method. A simplified calculation method is presented, which only changes the resistivity of the rotor copper layer and core. Therefore, the performance of the rotor can be calculated quickly when the temperature changes. However, because the change of the rotor core permeability is ignored, errors still exist in the calculated torque and power factor.
The following conclusions can be drawn. (1) The analytical method calculates the permeability of the rotor core under saturation conditions, and the relative permeability of the rotor core surface decreases first and then increases with the slip increase. (2) The equivalent B-H curve analytical method is more accurate in calculating rotor impedance, electromagnetic torque, and power factor than the original B-H curve analytical method. (3) A simplified calculation method that only changes the material resistivity is presented, which can quickly calculate the steady-state performance of the motor when temperature changes. However, when the rotor temperature varies widely, it is necessary to evaluate the performance error at the maximum temperature to determine the applicability of this method.

Key words： Copper-coated solid rotor induction motors the rotor impedance effective magnetization curve nonlinear rotor material

Received: 22 September 2023

PACS:

TM346

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhu Liwei
	Deng Zhiquan

Cite this article:

Zhu Liwei,Deng Zhiquan. 2D Analytic Calculation of Rotor-Impedance Parameters in Copper-Coated Solid Rotor Induction Motors Considering the Nonlinear Material[J]. Transactions of China Electrotechnical Society, 2024, 39(24): 7688-7699.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.231569 OR https://dgjsxb.ces-transaction.com/EN/Y2024/V39/I24/7688

[1] 张凤阁, 杜光辉, 王天煜, 等. 高速电机发展与设计综述[J]. 电工技术学报, 2016, 31(7): 1-18.
Zhang Fengge, Du Guanghui, Wang Tianyu, et al.Review on development and design of high speed machines[J]. Transactions of China Electrotechnical Society, 2016, 31(7): 1-18.
[2] 董剑宁, 黄允凯, 金龙, 等. 高速永磁电机设计与分析技术综述[J]. 中国电机工程学报, 2014, 34(27): 4640-4653.
Dong Jianning, Huang Yunkai, Jin Long, et al.Review on high speed permanent magnet machines including design and analysis technologies[J]. Proceedings of the CSEE, 2014, 34(27): 4640-4653.
[3] Gieras J F, Saari J.Performance calculation for a high-speed solid-rotor induction motor[J]. IEEE Transactions on Industrial Electronics, 2012, 59(6): 2689-2700.
[4] 燕婧文, 狄冲, 鲍晓华, 等. 基于二维有限元法的感应电机T型等效电路参数的分析与计算[J]. 中国电机工程学报, 2021, 41(增刊1): 294-302.
Yan Jingwen, Di Chong, Bao Xiaohua, et al.Analysis and calculation of T-type equivalent circuit para-meters of induction machines based on two dimensional finite element method[J]. Proceedings of the CSEE, 2021, 41(S1): 294-302.
[5] 凌在汛, 周理兵, 张毅, 等. 笼型实心转子屏蔽感应电机电磁场及参数研究(二): 二维多层电磁场模型及其解析计算[J]. 电工技术学报, 2018, 33(17): 4016-4028.
Ling Zaixun, Zhou Libing, Zhang Yi, et al.Parameters determination and electromagnetic field analysis of canned solid-rotor induction motor(2): 2D-multilayer electromagnetic model and its analytical calculation[J]. Transactions of China Electrotechnical Society, 2018, 33(17): 4016-4028.
[6] 黄子果, 王善铭, 孙宇光, 等. 开槽实心转子电机转子端部系数的计算与比较[J]. 电工技术学报, 2017, 32(15): 59-65.
Huang Ziguo, Wang Shanming, Sun Yuguang, et al.Calculation and comparison of rotor end factors of solid rotor induction machines with axial slits[J]. Transactions of China Electrotechnical Society, 2017, 32(15): 59-65.
[7] 张明玉. 复合转子异步电机的电磁理论及实用计算方法研究[D]. 武汉: 华中理工大学, 1993.
Zhang Mingyu.Research on electromagnetic theory and practical calculation method of compound rotor asynchronous motor[D]. Wuhan: Huazhong University of Science and Technology, 1993.
[8] 唐孝镐, 宁玉泉, 傅丰礼. 实心转子异步电机及其应用[M]. 北京: 机械工业出版社, 1991.
[9] 冯尔健. 铁磁体实心转子异步电机理论与计算[M]. 北京: 科学出版社, 1980.
[10] Boughrara K, Dubas F, Ibtiouen R.2-D analytical prediction of eddy currents, circuit model parameters, and steady-state performances in solid rotor induction motors[J]. IEEE Transactions on Magnetics, 2014, 50(12): 7028214.
[11] 张守首, 郭思源. 基于子域分析模型的实心转子感应电机磁场解析[J]. 电工技术学报, 2021, 36(20): 4285-4296.
Zhang Shoushou, Guo Siyuan.Analytical solution of magnetic field in solid rotor induction machine based on subdomain model[J]. Transactions of China Electrotechnical Society, 2021, 36(20): 4285-4296.
[12] Mellak C, Deuringer J, Muetze A.Impact of aspect ratios of solid rotor, large air gap induction motors on Run-up time and energy input[J]. IEEE Transactions on Industry Applications, 2022, 58(5): 6045-6056.
[13] Feng Haichao, Cui Xu, Si Jikai, et al.Equivalent circuit model of novel solid rotor induction motor with toroidal winding applying composite multilayer theory[J]. Applied Sciences, 2019, 9(16): 3288.
[14] Pyrhonen J.Calculating the effects of solid-rotor material on high-speed induction motor characteri-stics[J]. European Transactions on Electrical Power, 1991, 1(6): 301-310.
[15] Gieras J F, Eastham A R, Dawson G E.Performance calculation for single-sided linear induction motors with a solid steel reaction plate under constant current excitation[J]. IEE Proceedings B Electric Power Applications, 1985, 132(4): 185.
[16] Toliyat H A, Kliman G B.Handbook of electric motors[M]. New York: Marcel Dekker, 2004.
[17] 李锦彪, 谢德馨. 三维稳态涡流场有限元分析的后验误差估计[J]. 电工技术学报, 2010, 25(4): 10-14.
Li Jinbiao, Xie Dexin.A posteriori error estimation of finite element analysis for three dimensional steady state eddy current fields[J]. Transactions of China Electrotechnical Society, 2010, 25(4): 10-14.
[18] 谢德馨. 三维涡流场的有限元分析[M]. 北京: 机械工业出版社, 2001.
[19] Paoli G, Biro O, Buchgraber G.Complex repre-sentation in nonlinear time harmonic eddy current problems[J]. IEEE Transactions on Magnetics, 1998, 34(5): 2625-2628.
[20] Stermecki A, Bíró O, Preis K, et al.Numerical analysis of steady-state operation of three-phase induction machines by an approximate frequency domain technique1[J]. Elektrotechnik und Infor-mationstechnik, 2011, 128(3): 81-85.
[21] 黄子果, 王善铭, 倪守辉. 光滑实心转子异步电机等效电路参数的二维计算方法[J]. 中国电机工程学报, 2016, 36(9): 2505-2512.
Huang Ziguo, Wang Shanming, Ni Shouhui.2D calculation methods of equivalent-circuit parameters in smooth solid rotor induction machines[J]. Proceedings of the CSEE, 2016, 36(9): 2505-2512.
[22] Fahrner W, Vogelsberger M A, Wolbank T.Identi-fication of induction machine rotor parameters at any operating point considering temperature dependent permeability[C]//45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, 2019: 1101-1106.
[23] Krings A, Ali Mousavi S, Wallmark O, et al.Temperature influence of NiFe steel laminations on the characteristics of small slotless permanent magnet machines[J]. IEEE Transactions on Magnetics, 2013, 49(7): 4064-4067.