Parameter Identification and Output Characteristics Modelling of Photovoltaic Module Based on Effective Irradiance Correction
Li Guorong1, Zhang Yunpeng1, Zhou Hai2, Wu Ji2, Guan Yifei3
1. School of Electrical Engineering Shandong University Jinan 250061 China; 2. China Electric Power Research Institute Nanjing 210003 China; 3. State Grid Shandong Electric Power Co. Ltd Jinan 250003 China
Abstract Parameter identification and output characteristic modelling of photovoltaic (PV) module is a complex task with several significant challenges, including recording and contribution of large amounts of data, data privacy protection anduncertainty of physical parameters of PV modules under varying operating conditions. These poses significant challenges for the efficient implementation of traditional mathematical optimization methods. Recently, many researchers have turned their attention to intelligent optimization algorithm methods, which rely on data-driven principles and exhibit strong adaptability to solve the optimal solution. However, as the prediction accuracy of PV power generation improves, more stringent demands are placed on the accuracy of PV module modeling. The traditional analytical calculation approach alone struggles to meet the heightened requirements for power prediction accuracy, as it involves solving for five parameters under changing operating conditions. To tackle these challenges, this paper introduces a new method for parameter identification and modeling of PV module output characteristics that incorporates effective irradiance correction. First, the study analyzes environmental factors influencing the output characteristics of photovoltaic modules to establish a correction formula that converts measured irradiance to effective irradiance. This formula accounts for constant, angular, seasonal, and temperature adjustments. Second, the paper employs an analytical method to determine the single-diode model’s physical parameters under standard test conditions, fitting each parameter in the effective irradiance correction formula based on how the physical parameters vary with irradiance and temperature. The fitting process is guided by minimizing the root-mean-square error (RMSE) of the current-voltage (I-V) curve. Then, using the proposed correction method, the actual operating conditions of the PV modules are considered to adjust effective irradiance, which is then used to calculate the modules’ physical parameters and output characteristics. Finally, the method’s efficacy is confirmed using measured data: the corrected results enhance the accuracy of the I-V and power-voltage (P-V) output characteristic computations and maximum power estimation, out performing uncorrected outcomes under varied weather (sunny and cloudy), irradiance levels, and temperature ranges. The following conclusions can be drawn from the case studies: the results show that the correction value of effective irradiance is negative in low irradiance area, and the correction value changes from negative to positive and increases monotonically with the increase of irradiance. Compared with the irradiance obtained by fitting from the measured I-V data, the effective irradiance is more consistent with fitting irradiance than measured irradiance.In different weather conditions (sunny day, cloudy day), different irradiance, temperature and season intervals, the error RMSE of the proposed effective irradiance method is less than that of the measured irradiance calculation results. And the RMSE of high irradiance (greater than 800 W/m2) and temperature intervals (greater than 50℃) is significantly reduced by 21.6% and 18.6%. The mean RMSE is reduced by 9.78% for all outcomes. Compared with the measured irradiance calculation results, the effective irradiance calculation results is in better agreement with the measured maximum power. The proposed method in this study improves the modelling accuracy of PV modules and the accuracy of PV power prediction. Based on the work in this study, establishing more accurate correction equations for irradiance and temperature is the future work.
Li Guorong,Zhang Yunpeng,Zhou Hai等. Parameter Identification and Output Characteristics Modelling of Photovoltaic Module Based on Effective Irradiance Correction[J]. Transactions of China Electrotechnical Society, 2024, 39(23): 7331-7340.
[1] 李桐, 韩学山. 时变追踪并网光伏电站最大输出功率的无功优化方法[J]. 电工技术学报, 2023, 38(11): 2921-2931. Li Tong, Han Xueshan.Reactive power optimization for time-varying tracking of maximum output power of grid-connected photovoltaic power station[J]. Transactions of China Electrotechnical Society, 2023, 38(11): 2921-2931. [2] 田涵雷, 韩沛松, 唐嵩峰, 等. 计及轻量化设计的多电平光伏逆变器[J]. 电工技术学报, 2023, 38(16): 4301-4311. Tian Hanlei, Han Peisong, Tang Songfeng, et al.Multi-level photovoltaic inverter considering lightweight design[J]. Transactions of China Electrotechnical Society, 2023, 38(16): 4301-4311. [3] 叶林, 程文丁, 李卓, 等. 光伏集群有功功率分层预测控制策略[J]. 电力系统自动化, 2023, 47(2): 42-52. Ye Lin, Cheng Wending, Li Zhuo, et al.Hierarchical prediction control strategy of active power for photovoltaic cluster[J]. Automation of Electric Power Systems, 2023, 47(2): 42-52. [4] 杜磊, 赵涛, 冯之健, 等. 单相短路故障条件下级联模块中压光伏发电系统的有功功率回流抑制[J]. 电工技术学报, 2022, 37(20): 5201-5213. Du Lei, Zhao Tao, Feng Zhijian, et al.Active power backflow suppression of cascaded module medium-voltage PV power generation system during single-phase short-circuit fault[J]. Transactions of China Electrotechnical Society, 2022, 37(20): 5201-5213. [5] 李勇, 刘珮瑶, 胡斯佳, 等. 基于感应滤波的光伏电站谐波谐振抑制方法[J]. 电工技术学报, 2022, 37(15): 3781-3793. Li Yong, Liu Peiyao, Hu Sijia, et al.Harmonic resonance damping method of photovoltaic power station based on inductive filtering[J]. Transactions of China Electrotechnical Society, 2022, 37(15): 3781-3793. [6] 王再闯, 陈来军, 李笑竹, 等. 基于合作博弈的产销者社区分布式光伏与共享储能容量优化[J]. 电工技术学报, 2022, 37(23): 5922-5932. Wang Zaichuang, Chen Laijun, Li Xiaozhu, et al.Capacity optimization of distributed PV and shared energy storage of prosumer community based on cooperative game[J]. Transactions of China Electro-technical Society, 2022, 37(23): 5922-5932. [7] 程礼临, 臧海祥, 卫志农, 等. 考虑多光谱卫星遥感的区域级超短期光伏功率预测[J]. 中国电机工程学报, 2022, 42(20): 7451-7464. Cheng Lilin, Zang Haixiang, Wei Zhinong, et al.Ultra-short-term forecasting of regional photovoltaic power generation considering multispectral satellite remote sensing data[J]. Proceedings of the CSEE, 2022, 42(20): 7451-7464. [8] 任晓琳, 杨奕, 高龙, 等. 基于IBA-KELM模型的TCT光伏阵列故障诊断研究[J]. 电源学报, 2023, 21(5): 67-74. Ren Xiaolin, Yang Yi, Gao Long, et al.Research on fault diagnosis of tct photovoltaic array based on IBA-KELM Model[J]. Journal of Power Supply, 2023, 21(5): 67-74. [9] 许杨, 吕雪松, 张科乾, 等. 柔性光伏电池阵列物理参数特性建模[J]. 电气技术, 2023, 24(9): 49-54. Xu Yang, Lü Xuesong, Zhang Keqian, et al.Modeling of physical parameter characteristics of flexible photovoltaic cell arrays. Electrical Engineering, 2023, 24(9): 49-54. [10] Younis A, Bakhit A, Onsa M, et al.A comprehensive and critical review of bio-inspired metaheuristic frameworks for extracting parameters of solar cell single and double diode models[J]. Energy Reports, 2022, 8: 7085-7106. [11] 林泽源, 王宗尧, 张凡, 等. 考虑氢能应用的光伏直流微电网中储能容量配置寻优方法研究[J]. 高压电器, 2024, 60(7): 78-87. Lin Zeyuan, Wang Zongyao, Zhang Fan, et al.Research on optimization method for energy storage capacity configuration in photovoltaic dc micro grid considering hydrogen energy application[J]. High Voltage Apparatus, 2024, 60(7): 78-87. [12] 韦明杰, 王聪博, 余越, 等. 适用高比例分布式光伏接入的配电网多级保护优化配置方案[J]. 电力系统自动化, 2023, 47(22): 55-65. Wei Mingjie, Wang Congbo, Yu Yue, et al.Optimal configuration scheme of multi-staged protection in distribution network for integration of high proportion of distributed photovoltaic[J]. Automation of Electric Power Systems, 2023, 47(22): 55-65. [13] Hao Peng, Zhang Yunpeng, Lu Hao, et al.A novel method for parameter identification and performance estimation of PV module under varying operating conditions[J]. Energy Conversion and Management, 2021, 247: 114689. [14] Zhang Yunpeng, Hao Peng, Lu Hao, et al.A novel method for performance estimation of photovoltaic module without setting reference condition[J]. International Journal of Electrical Power & Energy Systems, 2022, 134: 107439. [15] Zhang Yunpeng, Gao Shuning, Gu Tingkun.Prediction of I-V characteristics for a PV panel by combining single diode model and explicit analytical model[J]. Solar Energy, 2017, 144: 349-355. [16] Zhang Yunpeng, Hao Peng, Lu Hao, et al.Modelling and estimating performance for PV module under varying operating conditions independent of reference condition[J]. Applied Energy, 2022, 310: 118527. [17] 简献忠, 翁志远, 王如志. CIJAYA算法在光伏组件参数辨识中的应用[J]. 太阳能学报, 2021, 42(11): 19-26. Jian Xianzhong, Weng Zhiyuan, Wang Ruzhi.CIJAYA algorithm for parameters identification of photovoltaic module model[J]. Acta Energiae Solaris Sinica, 2021, 42(11): 19-26. [18] Laudani A, Riganti Fulginei F, Salvini A.High performing extraction procedure for the one-diode model of a photovoltaic panel from experimental I-V curves by using reduced forms[J]. Solar Energy, 2014, 103: 316-326. [19] Lang Zhe, Zhang Yunpeng.Parameter identification and performance estimation for PV modules based on reduced forms model[J]. Journal of Renewable and Sustainable Energy, 2020, 12(5): 3703. [20] Mubarak R, Schilke H, Seckmeyer G.Improving the irradiance data measured by silicon-based sensors[J]. Energies, 2021, 14(10): 2766. [21] Perraki V, Kounavis P.Effect of temperature and radiation on the parameters of photovoltaic modules[J]. Journal of Renewable and Sustainable Energy, 2016, 8(1): 3102. [22] Nunes H G G, Pombo J A N, Mariano S J P S, et al. A new high performance method for determining the parameters of PV cells and modules based on guaranteed convergence particle swarm optimization[J]. Applied Energy, 2018, 211: 774-791. [23] Laudani A, Riganti Fulginei F, Salvini A.Identification of the one-diode model for photovoltaic modules from datasheet values[J]. Solar Energy, 2014, 108: 432-446. [24] He Yubo, Yang Qingzhen, Gao Xiang.Comprehensive optimization design of aerodynamic and electromagnetic scattering characteristics of serpentine nozzle[J]. Chinese Journal of Aeronautics, 2021, 34(3): 118-128. [25] Marion B, Anderberg A, Deline C, et al.New data set for validating PV module performance models[C]//2014 IEEE 40th Photovoltaic Specialist Conference (PVSC), Denver, CO, USA, 2014: 1362-1366. [26] Dang D N, Le Viet T, Takano H, et al.Estimating parameters of photovoltaic modules based on current-voltage characteristics at operating conditions[J]. Energy Reports, 2023, 9: 18-26.
2024, Vol. 39 
