双并列转子永磁直驱电机转子不平衡力分析与优化

doi:10.19595/j.cnki.1000-6753.tces.230427

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (3142 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Most parallel synchronous drive equipment, such as the two-roll mill and twin-screw pump, are driven by an induction motor with synchronous mechanical gear. Such drive systems have large volumes, poor synchronization of master and slave shafts, requiring regular maintenance. A dual-parallel rotor permanent magnet direct-driven motor has gradually come into view.
Due to the distance limitation between rotating shafts, part of the stator core and windings are cut off in the design of a dual-parallel rotor permanent magnet direct-driven motor, resulting in unbalanced rotor electromagnetic force. Therefore, this paper analyzes the inductance parameter asymmetry of the motor windings. Inductance parameters of the motor with windings pitch of 4 and 3 are calculated. On this basis, a mathematical model for the total electromagnetic force on the rotor is constructed, and the influence of each component force on the rotor’s total electromagnetic force is studied. Five optimization methods are proposed to optimize the electromagnetic force on the rotor: optimizing the duty angle, optimizing the coupling distance, adopting the asymmetric stator end structure, adopting the eccentric rotor structure, and eliminating part of the unit motors. Finally, the optimization effects of different methods on torque ripple are discussed. The advantages and disadvantages of different optimization methods are summarized, laying a foundation for studying dual-parallel rotor permanent magnet direct-driven motors.
The following conclusions can be drawn: (1) The long-pitch coil of the modular structure may cause asymmetric three-phase inductance parameters. Three-phase inductance can be effectively balanced by reasonably selecting the winding pitch and the head end of the A-phase winding. (2) The electromagnetic force F_totalon the rotor includes the electromagnetic force F₁ between the stator with windings and the corresponding rotor, the magnetic force F_mag between two permanent magnet rotors in the coupling area, the force F_end between the core end and the rotor outside the duty area in the coupling area, and the magnetic resistance force F_end,cogof the rotor against the core end in the coupling area and additional electromagnetic force F_ad. The X direction force of F_total is related to the above forces, while the Y direction force of F_total is only relevant to F₁. F₁, F_mag, and F_endare the most important components of F_total. (3) According to the analysis of the F_total, five methods are proposed to weaken the F_total. The influence of the five optimization methods on the electromagnetic force is given, and the advantages and disadvantages of the five optimization methods are discussed. The method with a rotor eccentric structure has the best optimization effect but requires higher processing technology. The method of eliminating partial unit motors is the most practical. (4) The motor can output rated electromagnetic torque using five optimization methods. In practical application, the combination of various optimization methods can be considered.

Key words： Dual-parallel rotor permanent magnet direct-driven motor electromagnetic force optimization method

Received: 06 April 2023 Published: 07 June 2024

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Tao Dajun
	Chen Yang
	Li Zheng
	Ge Baojun

Cite this article:

Tao Dajun,Chen Yang,Li Zheng等. Analysis and Optimization of Unbalanced Electromagnetic Force on the Rotor of Dual-Parallel Rotor Permanent Magnet Direct-Driven Motor[J]. Transactions of China Electrotechnical Society, 2024, 39(10): 2961-2973.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.230427 OR https://dgjsxb.ces-transaction.com/EN/Y2024/V39/I10/2961

[1] 孙立国. 二辊带钢轧机机座刚度计算[J]. 机械设计, 2021, 38(增刊1): 225-227.
Sun Liguo.Calculation of stand stiffness of 2H strip mill[J]. Journal of Machine Design, 2021, 38(S1): 225-227.
[2] 周兴杰, 李峰. 热轧板带立辊轧机主传动型式分析比较[J]. 轧钢, 2021, 38(4): 75-79.
Zhou Xingjie, Li Feng.Analysis and comparison of main drive types of the edge mill for the hot rolled plate and strip[J]. Steel Rolling, 2021, 38(4): 75-79.
[3] Valavi M, Le Besnerais J, Nysveen A.An investi- gation of zeroth-order radial magnetic forces in low- speed surface-mounted permanent magnet machines[J]. IEEE Transactions on Magnetics, 2016, 52(8): 1-6.
[4] Crider J M, Sudhoff S D.An inner rotor flux- modulated permanent magnet synchronous machine for low-speed high-torque applications[J]. IEEE Transactions on Energy Conversion, 2015, 30(3): 1247-1254.
[5] 张炳义, 贾宇琪, 冯桂宏. 新型模块组合式定子永磁电机[J]. 电工技术学报, 2015, 30(12): 243-252.
Zhang Bingyi, Jia Yuqi, Feng Guihong.Novel permanent magnet synchronous machines with modules combination stator[J]. Transactions of China Electrotechnical Society, 2015, 30(12): 243-252.
[6] Tan Qiang, Huang Xuzhen, Li Liyi, et al.Research on inductance unbalance and thrust ripple suppression of slot-less tubular permanent magnet synchronous linear motor[J]. IEEE Access, 2018, 6: 51011-51020.
[7] Chang Jiujian, Ma Wenli, Fan Yongkun, et al.New methods for arc permanent magnet linear synchronous motor to decrease torque ripple[J]. IEEE Transactions on Magnetics, 2012, 48(10): 2659-2663.
[8] Liu Fei, Hu Jianhui, Li Yong.Torque and radial force optimization of arc flux switching permanent magnet linear motor used for large scanning equipment[J]. IEEE Transactions on Energy Conversion, 2022, 37(1): 304-315.
[9] 蒋钱, 卢琴芬, 李焱鑫. 双三相永磁直线同步电机的推力波动及抑制[J]. 电工技术学报, 2021, 36(5): 883-892.
Jiang Qian, Lu Qinfen, Li Yanxin.Thrust ripple and depression method of dual three-phase permanent magnet linear synchronous motors[J]. Transactions of China Electrotechnical Society, 2021, 36(5): 883-892.
[10] 郭科宇, 李耀华, 史黎明. 分段供电双三相永磁同步直线电机电流解耦与扰动抑制[J]. 电工技术学报, 2022, 37(24): 6332-6344.
Guo Keyu, Li Yaohua, Shi Liming.Current decoupling and force disturbance suppression of dual three-phase permanent magnet linear synchronous motors with section power supply[J]. Transactions of China Electrotechnical Society, 2022, 37(24): 6332-6344.
[11] Zhang Jiaxu, Zhang Bingyi, Feng Guihong.Influence of pole and slot combination on torque characteristics and radial force of fractional slot permanent magnet machines[J]. IEEJ Transactions on Electrical and Electronic Engineering, 2021, 16(8): 1055-1066.
[12] Yang Haodong, Chen Yangsheng.Influence of radial force harmonics with low mode number on elec- tromagnetic vibration of PMSM[J]. IEEE Transa- ctions on Energy Conversion, 2014, 29(1): 38-45.
[13] 刘蓉晖, 刘锦坤, 章君达, 等. 基于双曲余切变换的Halbach阵列表贴式永磁电机转子偏心气隙磁场解析模型[J]. 电工技术学报, 2023, 38(6): 1433-1446.
Liu Ronghui, Liu Jinkun, Zhang Junda, et al.Analytical model for air-gap magnetic field in Halbach arrays surface-mounted permanent magnet motor with rotor eccentricity based on hyperbolic cotangent transformation[J]. Transactions of China Electrotechnical Society, 2023, 38(6): 1433-1446.
[14] 李泽星, 夏加宽, 刘铁法, 等. 基于分段交错梯形磁极的分数槽集中绕组永磁电机局部切向力的削弱[J]. 电工技术学报, 2023, 38(6): 1447-1459, 1485.
Li Zexing, Xia Jiakuan, Liu Tiefa, et al.Reduction of local tangential force of fractional-slot concentrated winding permanent magnet synchronous machines with piecewise stagger trapezoidal poles[J]. Transa- ctions of China Electrotechnical Society, 2023, 38(6): 1447-1459, 1485.
[15] 黄守道, 成双银, 罗德荣, 等. 盘式对转双转子永磁同步电机的设计和特性分析[J]. 电工技术学报, 2017, 32(23): 72-80.
Huang Shoudao, Cheng Shuangyin, Luo Derong, et al.Design and characteristic analysis of an axial-flux permanent magnet synchronous motor with contra- rotating rotors[J]. Transactions of China Electro- technical Society, 2017, 32(23): 72-80.
[16] 巫川, 李冠醇, 王东. 永磁电动悬浮系统三维解析建模与电磁力优化分析[J]. 电工技术学报, 2021, 36(5): 924-934.
Wu Chuan, Li Guanchun, Wang Dong.3-D analytical modeling and electromagnetic force optimization of permanent magnet electrodynamic suspension system[J]. Transactions of China Electrotechnical Society, 2021, 36(5): 924-934.
[17] Zhu Sa, Lu Jianbo, Zeng Feng.Fast calculation of electromagnetic forces in IPMSMs under PWM VSI supply based on small-signal time-harmonic finite element method[J]. CES Transactions on Electrical Machines and Systems, 2022, 6(1): 67-76.
[18] 历建刚. 永磁体间的磁力和磁力矩研究[D]. 长春: 吉林大学, 2015.
Li Jiangang.Research on the force and torque between permanent magnets[D]. Changchun: Jilin University, 2015.
[19] 瞿川. 钕铁硼永磁体磁力和磁刚度理论及应用研究[D]. 长春: 吉林大学, 2022.
Qu Chuan.Study on the theory and application of magnetic force and magnetic stiffness of NdFeB permanent magnets[D]. Changchun: Jilin University, 2022.