镀锌线夹大气腐蚀温升特性及表征特征量研究

doi:10.19595/j.cnki.1000-6753.tces.231464

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1373 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

With the rapid development of the power system, the long-term safe and stable operation of overhead lines is of great importance. The galvanized clamps are the key connection component. Prolonged exposure to the natural environment causes them to suffer from varying degrees of atmospheric corrosion, resulting in localized failures and shortened operating life. However, there is no uniform standard for identifying the corrosion status of galvanized clamps. In current research, manual identification is somewhat subjective, and machine learning requires a large amount of data support. Other methods, such as ultrasonic reflection, are not suitable for overhead lines. To address these issues, this paper investigates the corrosion temperature rise characteristics of galvanized clamps and proposes a feature quantity to characterize the degree of atmospheric corrosion of galvanized clamps. Based on the measurement of the abnormal temperature rise, the corrosion state of the galvanized clamps can be effectively identified.
Firstly, the galvanized parallel clamps were considered as the object of research. An accelerated corrosion and thermal cycling test circuit was set up in the laboratory. The homemade electromagnetic induction coils were used as a stabilized AC power supply. The alternating wet and dry corrosion method was employed to simulate acidic, alkaline, and neutral corrosive environments in the atmosphere. The test current ranged from 240 A to 420 A with a step of 60 A according to IEEE and Chinese standards. Secondly, the surface states of galvanized clamps in various corrosive environments were observed with an electron microscope. The corrosion products and development processes were analyzed. The surface temperatures were measured and recorded by an infrared camera to characterize the temperature rise of the clamps in various corrosive environments. Finally, based on the test results, a feature quantity was defined and extracted, and the corrosion grading method and the fitting equation were proposed.
The acid corrosion process includes the formation of the white corrosion layer, the accumulation of the layer, and the exfoliation of the corrosion products. The products are mainly Al₂O₃, zinc sulfate salts, and SO₂, which aggravate corrosion. The alkaline corrosion process is similar to the acidic one, but most of the products are insoluble substances and have a protective effect on the inner aluminum layer. The neutral corrosion can be interpreted as the process of "dissolution - deposition - dissolution". The clamps have maximum temperature rise in an acidic environment. At the low conductivities of the solutions, the temperature rise curves are approximately linear for all of the environments. As the conductivities increase, the temperature rise gradually saturates. The corrosion rate also shows an upward trend as the current increases.
The following conclusions can be drawn from the tests and analysis: (1) The acidic environments have the greatest corrosive effect on galvanized clamps, followed by the alkaline and saline environments. (2) Under the same conditions, the temperature rise gradually decreases in acidic, alkaline, and saline environments. The conductivity and current are positively correlated with the temperature rise. (3) The corrosion feature quantity k can objectively characterize the corrosion state of galvanized conductive clamps, and realize accurate identification and grading of corrosion.

Key words： Galvanized conductive clamp accelerated corrosion test temperature rise infrared imaging corrosion identification

Received: 05 September 2023

PACS:

TM75

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liao Yi
	Jiang Xingliang
	Zhao Jiacheng
	Zhang Zhijin
	Huang Wuhong

Cite this article:

Liao Yi,Jiang Xingliang,Zhao Jiacheng等. Study on Temperature Rise Characteristics and Feature Quantity of Galvanized Clamps for Atmospheric Corrosion[J]. Transactions of China Electrotechnical Society, 0, (): 231464-231464.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.231464 OR https://dgjsxb.ces-transaction.com/EN/Y0/V/I/231464

[1] 周念成, 兰雪珂, 莫复雪, 等. 计及线路接头温升约束的受端电网转供优化模型[J]. 电工技术学报, 2021, 36(15): 3237-3249.
Zhou Niancheng, Lan Xueke, Mo Fuxue, et al.A power transfer optimization model of receiving-end power systems considering line joint temperature rise constraints[J]. Transactions of China Electrotechnical Society, 2021, 36(15): 3237-3249.
[2] 黄杨, 张广斌, 王潜, 等. 基于图像特征的输电线路故障行波存续性判别[J]. 电工技术学报, 2023, 38(5): 1339-1352.
Huang Yang, Zhang Guangbin, Wang Qian, et al.Identification of the existence and persistence of faulted traveling waves for transmission lines based on image features[J]. Transactions of China Electrotechnical Society, 2023, 38(5): 1339-1352.
[3] Lequien F, Auzoux Q, Moine G, et al.Characterization of an aluminum conductor steel reinforced (ACSR) after 60 years of operation[J]. Engineering Failure Analysis, 2021, 120: 105039.
[4] Li Ming, Yao Lingbo, Zhang Shuoshuo, et al.Study on bolt head corrosion influence on the clamping force loss of high strength bolt[J]. Engineering Failure Analysis, 2021, 129: 105660.
[5] Panossian Z, Mariaca L, Morcillo M, et al.Steel cathodic protection afforded by zinc, aluminium and zinc/aluminium alloy coatings in the atmosphere[J]. Surface and Coatings Technology, 2005, 190(2/3): 244-248.
[6] 刘敏, 王红旭, 周国亮, 等. 基于深度学习的输电线路耐张线夹倾斜缺陷定量检测[J]. 沈阳工业大学学报, 2023, 45(4): 442-446.
Liu Min, Wang Hongxu, Zhou Guoliang, et al.Quantitative detection based on deep learning technology for inclination defects of strain clamps[J]. Journal of Shenyang University of Technology, 2023, 45(4): 442-446.
[7] Odnevall Wallinder I, Leygraf C.A critical review on corrosion and runoff from zinc and zinc-based alloys in atmospheric environments[J]. Corrosion, 2017, 73(9): 1060-1077.
[8] Zhao Qiyue, Guo Chuang, Niu Keke, et al.Long-term corrosion behavior of the 7A85 aluminum alloy in an industrial-marine atmospheric environment[J]. Journal of Materials Research and Technology, 2021, 12: 1350-1359.
[9] Wu Yan, Zhu Zhaohua, Shen Dong, et al.Electrolyte engineering enables stable Zn-Ion deposition for long-cycling life aqueous Zn-ion batteries[J]. Energy Storage Materials, 2022, 45: 1084-1091.
[10] Tao Bo, Cheng Li, Wang Jiuyi, et al.A review on mechanism and application of functional coatings for overhead transmission lines[J]. Frontiers in Materials, 2022, 9: 995290.
[11] Cai Yikun, Xu Yuanming, Zhao Yu, et al.Atmospheric corrosion prediction: a review[J]. Corrosion Reviews, 2020, 38(4): 299-321.
[12] 国家市场监督管理总局, 中国国家标准化管理委员会. 金属和合金的腐蚀大气腐蚀性第2部分:腐蚀等级的指导值: GB/T 19292.2—2018[S]. 北京: 中国标准出版社, 2018.
[13] 苟军年, 杜愫愫, 刘力. 基于改进掩膜区域卷积神经网络的输电线路绝缘子自爆检测[J]. 电工技术学报, 2023, 38(1): 47-59.
Gou Junnian, Du Susu, Liu Li.Transmission line insulator self-explosion detection based on improved mask region-convolutional neural network[J]. Transactions of China Electrotechnical Society, 2023, 38(1): 47-59.
[14] Song Zhiwei, Huang Xinbo, Ji Chao, et al.Deformable YOLOX: detection and rust warning method of transmission line connection fittings based on image processing technology[J]. IEEE Transactions on Instrumentation Measurement, 2023, 72: 3238742.
[15] Zhai Yongjie, Wang Qianming, Guo Congbin, et al.CGRM: a context-based graph reasoning model for fitting detection[J]. IEEE Transactions on Instrumentation Measurement, 2022, 71: 3205006.
[16] 杜文娇, 叶齐政, 袁哲, 等. 基于可见光图像和机器学习的金具温升识别方法[J]. 高压电器, 2022, 58(10): 221-229.
Du Wenjiao, Ye Qizheng, Yuan Zhe, et al.Temperature rise identification method on fitting based on visible image and machine learning[J]. High Voltage Apparatus, 2022, 58(10): 221-229.
[17] Zhang Shunquan, Jia Zijian, Xiong Yuanliang, et al.Wave amplitude of embedded ultrasonic transducer-based damage monitoring of concrete due to steel bar corrosion[J]. Structural Health Monitoring, 2022, 21(4): 1694-1709.
[18] 杨帆, 王梦珺, 谭天, 等. 基于目标像素宽度识别的电力设备红外成像单目测距改进算法[J]. 电工技术学报, 2023, 38(8): 2244-2254.
Yang Fan, Wang Mengjun, Tan Tian, et al.An improved monocular ranging method for infrared image of power equipment based on the pixel width recognition of objects[J]. Transactions of China Electrotechnical Society, 2023, 38(8): 2244-2254.
[19] Han Sheng, Yang Fan, Jiang Hui, et al.A smart thermography camera and application in the diagnosis of electrical equipment[J]. IEEE Transactions on Instrumentation Measurement, 2021, 70: 3094235.
[20] Fu Xuguo, Lin Guosong, Yang Xiaobin.Parameter identification for current-temperature relationship of contact wire under natural convection[J]. International Journal of Electrical Power & Energy Systems, 2022, 135: 107554.
[21] Bin Yousuf W, Khan T M R, Tariq S T, et al. Remaining useful life prediction of aerial bundled cables in coastal areas using thermal and corrosion degradation models[J]. IEEE Transactions on Power Delivery, 2022, 37(4): 2543-2550.
[22] Liao Yi, Jiang Xingliang, Zhang Zhijin, et al.The influence of wind speed on the thermal imaging clarity based inspection for transmission line conductors[J]. IEEE Transactions on Power Delivery, 2023, 38(3): 2101-2109.
[23] 仲林林, 胡霞, 刘柯妤. 基于改进生成对抗网络的无人机电力杆塔巡检图像异常检测[J]. 电工技术学报, 2022, 37(9): 2230-2240, 2262.
Zhong Linlin, Hu Xia, Liu Keyu.Power tower anomaly detection from unmanned aerial vehicles inspection images based on improved generative adversarial network[J]. Transactions of China Electrotechnical Society, 2022, 37(9): 2230-2240, 2262.
[24] 夏文新, 杨小冈, 席建祥, 等. 基于红外探测的无人机群结构特性感知方法[J/OL]. 红外与激光工程, 2023: 1-14. http://kns.cnki.net/kcms/detail/12.1261.TN.20230829.1747.010.html.
Xia Wenxin, Yang Xiaogang, Xi Jianxiang, et al. Structure characteristics sensing method of unmanned aerial vehicle group based on infrared detection[J/OL]. Infrared and Laser Engineering, 2023: 1-14. http://kns.cnki.net/kcms/detail/12.1261.TN.20230829.1747.010.html.
[25] Fu Chuanqing, Huang Jin, Dong Zheng, et al.Shear behavior of reinforced concrete beams subjected to accelerated non-uniform corrosion[J]. Engineering Structures, 2023, 286: 116081.
[26] Jiao Jinchao, Lian Yong, Liu Zhao, et al.Correlation between laboratory-accelerated corrosion and field exposure test for high-strength stainless steels[J]. Materials, 2022, 15(24): 9075.
[27] 罗凌, 张福增, 王黎明, 等. 高压直流瓷和玻璃绝缘子金属附件电解腐蚀试验方法[J]. 电工技术学报, 2015, 30(9): 103-111.
Luo Ling, Zhang Fuzeng, Wang Liming, et al.Test methods for hardware electrolytic corrosion of porcelain and glass insulators on HVDC transmission lines[J]. Transactions of China Electrotechnical Society, 2015, 30(9): 103-111.
[28] Chen Xiufang, Zhang Zhenyu, Zhang Hanping, et al.Influence of air pollution factors on corrosion of metal equipment in transmission and transformation power stations[J]. Atmosphere, 2022, 13(7): 1041.
[29] IEEE Power and Energy Society. IEEE standard for calculating the current-temperature relationship of bare overhead conductors: IEEE Std 738—2023[S]. IEEE, 2023.
[30] 国家能源局. 导体和电器选择设计规程: DL/T 5222—2021[S]. 北京: 中国计划出版社, 2022.
[31] 国家能源局. 带电设备红外诊断应用规范: DL/T 664—2016[S]. 北京: 中国电力出版社, 2017.
[32] 刘争春. 沿海大气环境下典型金属材料初期腐蚀行为研究[D]. 广州: 华南理工大学, 2016.
Liu Zhengchun.Research on initial corrosion behavior of typical metal materials in costal atmospheric environment[D]. Guangzhou: South China University of Technology, 2016.
[33] International Electrotechnical Commission.Overhead lines - requirements and tests for fittings: IEC 61284:1997[S]. IEC, 1997.
[34] Versaci M, Morabito F C.Image edge detection: a new approach based on fuzzy entropy and fuzzy divergence[J]. International Journal of Fuzzy Systems, 2021, 23(4): 918-936.
[35] Dollar P, Zitnick C L.Fast edge detection using structured forests[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2015, 37(8): 1558-1570.
[36] 国家能源局. 输电线路铁塔防腐蚀保护涂装: DL/T 1453—2015[S]. 北京: 中国电力出版社, 2015.
[37] Zhang Fuzeng, Luo Bing, Wang Guoli, et al.Study of test method for accelerated electrolytic corrosion of iron caps of DC disc porcelain insulators[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2015, 22(5): 2937-2943.