LCC-LCC/S自切换恒流-恒压复合型无线电能传输系统

doi:10.19595/j.cnki.1000-6753.tces.221236

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (7226 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The two-stage charging mode can solve CC overcharge and CV undercharge during battery charging. There are several ways to achieve CC/CV charging for WPT systems, such as working frequency adjustment, duty cycle adjustment, and adding a DC-DC chopper at the secondary side. Such methods can achieve CC/CV charging with high accuracy, but their control schemes need to be simplified. Moreover, the output current and voltage fluctuate greatly during the charging mode switching. The spike will impact the battery on the battery life. Therefore, this paper proposes a LCC-LCC/S self-switching CC and CV composite topology, only requiring two AC switches and a compensation capacitor on the secondary side. By simultaneously opening and closing the two AC switches, the proposed WPT system can achieve the segmented CC/CV charging and improve system safety under abnormal working conditions. Moreover, ZPA in both CC and CV charging modes can be realized, and the output voltage and current fluctuate very small during switching. At last, the performance evaluation is also given by comparing the LCC-LCC/S topology with SS/PS hybrid topology.
Firstly, the self-switching LCC-LCC/S-based composite topology is presented. The characteristics of CC/CV, ZPA, and the load optimal switching point are also analyzed. Secondly, several abnormal working conditions are analyzed, including the secondary side missing, load short-circuit, and load open-circuit. The corresponding solutions are presented. Thirdly, by comparing the system characteristics of the currently popular S/SP topology, the advantages of the LCC-LCC/S topology are highlighted. Finally, an experimental platform is built. The experimental results indicate that a highly efficient, reliable and safe WPT system is manufactured. The transmission efficiency is 86 %~92 % during the charging process, the maximum current is 5.03 A, and the maximum voltage is 48.92 V.
The simulated and experimental results show that the LCC-LCC and the LCC-S topology can achieve load-independent CC and CV output with ZPA characteristics, respectively. The output current changes only below 0.02 A, and the output voltage changes below 0.2 V during the charging mode switching. Therefore, they will not damage the battery. In order to improve charging safety and avoid WPT system damage under abnormal operating conditions, the proposed WPT system can achieve the two charging modes freely, switching the LCC-LCC topology to the LCC-S topology in the load open-circuit and the LCC-S topology to the LCC- LCC topology in the load short circuit. Moreover, the voltage peak across the switches can be effectively reduced by controlling the switching sequence for the duration of the charging mode switching. The proposed system has higher efficiency and better anti-misalignment capability than the S/PS composite system. The experimental WPT system can produce a maximum output voltage of 48.92 V, a maximum output current of 5.03 A, a maximum output power of 242.26 W, and an efficiency of 86 % to 92 %.
The following conclusions can be drawn from the simulation and the experiments: (1) The proposed LCC-LCC/S composite topology can realize a two-stage CC/CV charging output and effectively solve CC overcharge and CV undercharge problems. (2) The proposed system can effectively deal with abnormal working conditions such as secondary side missing, load short circuit, and load open circuit. In addition, the WPT system can automatically run a low-power standby state without any control after the charging completion and the load removal. (3) The voltage spike across the switches is effectively reduced through the optimal control of the switching timing. (4) The performance of the LCC-LCC/S topology on the anti-misalignment capability is better than that of the current popular S/PS composite topology.

Key words： Wireless power transfer self-switching constant current (CC) and constant voltage (CV) composite topology

Received: 28 June 2022

PACS:

TM724

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yang Yunhu
	Jia Weina
	Liang Dazhuang
	Xue Jianzhi
	Li Yu

Cite this article:

Yang Yunhu,Jia Weina,Liang Dazhuang等. A Self-Switching Wireless Power Transfer System Based on Hybrid Topology of LCC-LCC/S with Constant Current and Constant Voltage[J]. Transactions of China Electrotechnical Society, 2023, 38(18): 4823-4837.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.221236 OR https://dgjsxb.ces-transaction.com/EN/Y2023/V38/I18/4823

[1] Nikola T. System of transmission of electrical energy: US0645576[P].1900-03-20.
[2] Li Zhenjie, Zhu Chunbo, Jiang Jinhai, et al.A 3kW wireless power transfer system for sightseeing car supercapacitor charge[J]. IEEE Transactions on Power Electronics, 2017, 32(5): 3301-3316.
[3] 赵军, 赵毅航, 武志军, 等. 电动汽车无线充电系统对心脏起搏器的电磁兼容与热效应影响[J]. 电工技术学报, 2022, 37(增刊1): 1-10.
Zhao Jun, Zhao Yihang, Wu Zhijun, et al.The influence of electric vehicle wireless charging system on electromagnetic compatibility and thermal effect of cardiac pacemaker[J]. Transactions of China Electrotechnical Society, 2022, 37(S1): 1-10.
[4] 吴丽君, 李冠西, 张朱浩伯, 等. 一种具有恒流恒压输出自切换特性的电动汽车无线电能传输系统拓扑[J]. 电工技术学报, 2020, 35(18): 3781-3790.
Wu Lijun, Li Guanxi, Zhang Zhuhaobo, et al.A wireless power transfer system topology with automatic switching characteristics of constant current and constant voltage output for electric vehicle charging[J]. Transactions of China Elect-rotechnical Society, 2020, 35(18): 3781-3790.
[5] 程志远, 陈坤, 李东东, 等. 旋转式无线充电系统偏移特性研究[J]. 电工技术学报, 2021, 36(22): 4648-4657.
Cheng Zhiyuan, Chen Kun, Li Dongdong, et al.Research on offset characteristics of rotary wireless charging system[J]. Transactions of China Electro-technical Society, 2021, 36(22): 4648-4657.
[6] Obayashi S, Kanekiyo Y, Nishizawa K, et al.85-kHz band 450-W inductive power transfer for unmanned aerial vehicle wireless charging port[C]//Proceedings of IEEE Wireless Power Transfer Conference (WPTC), London, UK, 2020: 80-84.
[7] Yang Lei, Zhang Yuanqi, Li Xiaojie, et al.Analysis and design of four-plate capacitive wireless power transfer system for undersea applications[J]. CES Transactions on Electrical Machines and Systems, 2021, 5(3): 202-211.
[8] 薛明, 杨庆新, 章鹏程, 等. 无线电能传输技术应用研究现状与关键问题[J]. 电工技术学报, 2021, 36(8): 1547-1568.
Xue Ming, Yang Qingxin, Zhang Pengcheng, et al.Application status and key issues of wireless power transmission technology[J]. Transactions of China Electrotechnical Society, 2021, 36(8): 1547-1568.
[9] Han Wei, Chau K T, Jiang Chaoqiang, et al.Design and analysis of quasi-omnidirectional dynamic wireless power transfer for fly-and-charge[J]. IEEE Transactions on Magnetics, 2019, 55(7): 1-9.
[10] 姚若玉, 曲小慧, 郁继栋, 等. 自适应电池充电曲线的三线圈电池无线充电器[J]. 电力系统自动化, 2022, 46(7): 170-177.
Yao Ruoyu, Qu Xiaohui, Yu Jidong, et al.Three-coil wireless battery charger with self-adaptation to battery charging curve[J]. Automation of Electric Power Systems, 2022, 46(7): 170-177.
[11] 郁继栋, 曲小慧, 王国雨, 等. 基于极简三电容补偿的单级式无线电池充电器[J]. 电力系统自动化, 2021, 45(14): 165-172.
Yu Jidong, Qu Xiaohui, Wang Guoyu, et al.Single-stage inductive power transferred battery charger based on minimal three-capacitor com-pensation[J]. Automation of Electric Power Systems, 2021, 45(14): 165-172.
[12] 王春芳, 岳睿, 李厚基, 等. 基于单管电路的恒流恒压无线充电系统研究[J]. 电工技术学报, 2021, 36(22): 4637-4647, 4657.
Wang Chunfang, Yue Rui, Li Houji, et al.Research on constant-current and constant-voltage wireless charging system based on single-switch circuit[J]. Transactions of China Electrotechnical Society, 2021, 36(22): 4637-4647, 4657.
[13] Kim M, Byeon J, Lee B K, et al.Performance analysis of magnetic power pads for inductive power transfer systems with ferrite structure variation[C]//Pro-ceedings of Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 2017: 1-6.
[14] Wang Meng, Feng Jing, Shi Yanyan, et al.Demag-netization weakening and magnetic field con-centration with ferrite core characterization for efficient wireless power transfer[J]. IEEE Transa-ctions on Industrial Electronics, 2019, 66(3): 1842-1851.
[15] Wang C S, Stielau O H, Covic G A.Design considerations for a contactless electric vehicle battery charger[J]. IEEE Transactions on Industrial Electronics, 2005, 52(5): 1308-1314.
[16] Wu H H, Gilchrist A, Sealy K D, et al.A high efficiency 5kW inductive charger for EVs using dual side control[J]. IEEE Transactions on Industrial Informatics, 2012, 8(3): 585-595.
[17] Huang Mo, Lu Yan, Martins R P.A reconfigurable bidirectional wireless power transceiver for battery-to-battery wireless charging[J]. IEEE Transactions on Power Electronics, 2019, 34(8): 7745-7753.
[18] Buja G, Bertoluzzo M, Mude K N.Design and experimentation of WPT charger for electric city car[J]. IEEE Transactions on Industrial Electronics, 2015, 62(12): 7436-7447.
[19] Li Hongchang, Li Jie, Wang Kangping, et al.A maximum efficiency point tracking control scheme for wireless power transfer systems using magnetic resonant coupling[J]. IEEE Transactions on Power Electronics, 2015, 30(7): 3998-4008.
[20] Boys J T, Covic G A, Xu Yongxiang.DC analysis technique for inductive power transfer pick-ups[J]. IEEE Power Electronics Letters, 2003, 1(2): 51-53.
[21] 廖志娟, 周磊, 吴镇, 等. 变结构LC-CLCL拓扑恒压恒流型电场耦合电能传输系统[J]. 中国电机工程学报, 2021, 41(17): 6039-6050.
Liao Zhijuan, Zhou Lei, Wu Zhen, et al.An electric-field coupled power transfer system with constant voltage and constant current output based on changeable LC-CLCL resonant circuit[J]. Pro-ceedings of the CSEE, 2021, 41(17): 6039-6050.
[22] 张辉, 王换民, 李宁, 等. 电动汽车无线充电混合补偿拓扑电路分析[J]. 电力系统自动化, 2016, 40(16): 71-75.
Zhang Hui, Wang Huanmin, Li Ning, et al.Analysis on hybrid compensation topology circuit for wireless charging of electric vehicles[J]. Automation of Electric Power Systems, 2016, 40(16): 71-75.
[23] 苏玉刚, 谢诗云, 王智慧, 等. 基于F-F/T变结构谐振网络的恒压-恒流型电场耦合电能传输系统[J]. 电工技术学报, 2019, 34(6): 1127-1136.
Su Yugang, Xie Shiyun, Wang Zhihui, et al.An electric-field coupled power transfer system with constant voltage and constant current output based on F-F/T changeable resonant circuit[J]. Transactions of China Electrotechnical Society, 2019, 34(6): 1127-1136.
[24] 孙跃, 张欢, 陶维, 等. 基于变结构模式的宽负载恒压感应耦合电能传输系统[J]. 电力系统自动化, 2016, 40(5): 109-114, 126.
Sun Yue, Zhang Huan, Tao Wei, et al.Constant-voltage inductively coupled power transfer system with wide load range based on variable structure mode[J]. Automation of Electric Power Systems, 2016, 40(5): 109-114, 126.