磁致伸缩振动能量收集器的全耦合非线性等效电路模型

doi:10.19595/j.cnki.1000-6753.tces.220874

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2930 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Magnetostrictive vibration energy harvester (MVEH) uses the Villali effect of magnetostrictive rod or sheet to convert energy from mechanical vibrations to electrical energy. MVEH has obvious advantages in output stability, strain capacity and electromechanical coupling. In areas where power is not readily available, such as wildlife sanctuaries, MVEH can convert the abundant animal kinetic energy into electrical energy to power some sensing devices. However, multiple bidirectional coupling of mechanica-magnetic-electric and nonlinear characteristics occur in the process of energy conversion. In previous studies, the prediction models for the output characteristics of MVEH were mostly based on linear piezomagnetic equations, which do not allow for good prediction of the output voltage characteristics of the harvester due to the neglect of nonlinearities of materials.
In order to solve the problem of large errors in the prediction of the output voltage characteristics of the linear model. This paper constructs a mechanical-magnetic-electric three-port fully coupled nonlinear equivalent circuit model based on the Gibbs free energy. The model takes into account the effects of different compressive stresses, bias magnetic fields and leakage magnetism, et al. The core material chosen for the MVEH studied in this work is Fe_81.6Ga_18.4, which has excellent electromagnetic, mechanical and magnetostrictive properties. A magnetostrictive materials test platform has been built to analyse the main magnetic properties of Galfenol. Firstly, the M-H curves of the rod are tested in the compressive stress range of 0~70 MPa to obtain the trend of the magnetisation intensity of the Galfenol rod at different compressive stresses and bias magnetic fields. Secondly, based on the Gibbs free energy within the material and using a modified hyperbolic function to characterise the M-H curve clusters. A final machine-magnetic coupling model of the magnetostrictive Galfenol rod is constructed. To further simplify the analysis of the MVEH equivalent output model, the mechanical, magnetic and electrical aspects of the global system of MVEH are interlinked with their equivalent circuits using a specific electromechanical analogy to construct a three-port fully coupled nonlinear equivalent circuit model. In order to verify the accuracy of the predicted results of the equivalent circuit model, an experimental test system consisting of a pneumatic stamping press and an air compressor is built. It can provide MVEH with vibration forces varying in amplitude from 115 N to 1 310 N and in frequency from 0.5 Hz to 2 Hz to simulate the vibrations generated by animal movements in a practical application. In addition, a double-rods MVEH which can withstand large vibration force is designed. After several sets of experiments, the maximum actual output voltage of MVEH can reach 1 483 mV. Two groups of different vibration force input conditions and different external load resistance values are selected as comparison conditions. By comparing the peak-to-peak value of output voltage U_pp and output voltage RMS U_rms obtained from the actual test with the data predicted by the equivalent circuit model. The results show that when the vibration force amplitude F=350 N, frequency f=1 Hz, and external load R=10 kΩ, the relative errors are η_pp =3.58%, η_rms =2.47%. When the F=755 N, f=1 Hz and the external loads are R=10 kΩ, R=200 Ω, R=50 Ω and R=10 Ω respectively, η_pp are 3.79%, 3.00%, 3.82% and 3.07% respectively. η_rms are 1.10%, 3.71%, 2.49% and 3.52% respectively.
The relative errors η of U_pp and U_rms predicted by the model and experimentally tested are less than 4%, proving the effectiveness of the equivalent circuit model for predicting output voltage. In addition, the MVEH also ensures structural and output stability while withstanding large amplitude vibration forces. This study can provide some theoretical guidance for the construction of nonlinear fully coupled models of MVEH and the prediction of output voltage characteristics.

Key words： Vibration energy harvesters Galfenol fully coupled nonlinear models equivalent circuit output characteristic analysis

Received: 19 May 2022

PACS:

TM274

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Huang Wenmei
	Liu Zequn
	Guo Wanli
	Xue Tianxiang
	Weng Ling

Cite this article:

Huang Wenmei,Liu Zequn,Guo Wanli等. Fully Coupled Nonlinear Equivalent Circuit Model for Magnetostrictive Vibration Energy Harvester[J]. Transactions of China Electrotechnical Society, 2023, 38(15): 4076-4086.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.220874 OR https://dgjsxb.ces-transaction.com/EN/Y2023/V38/I15/4076

[1] 范兴明, 高琳琳, 莫小勇, 等. 无线电能传输技术的研究现状与应用综述(英文)[J]. 电工技术学报, 2019, 34(7): 1353-1380.
Fan Xingming, Gao Linlin, Mo Xiaoyong, et al.Overview of research status and application of wireless power transmission technology[J]. Transactions of China Electrotechnical Society, 2019, 34(7): 1353-1380.
[2] 王照, 刘浩. 配电设备生命周期管理研究[J]. 电气技术, 2020, 21(12): 119-123.
Wang Zhao, Liu Hao.Research on life-cycle management of distribution equipment[J]. Electrical Engineering, 2020, 21(12): 119-123.
[3] 薛明, 杨庆新, 章鹏程, 等. 无线电能传输技术应用研究现状与关键问题[J]. 电工技术学报, 2021, 36(8): 1547-1568.
Xue Ming, Yang Qingxin, Zhang Pengcheng, et al.Application status and key issues of wireless power transmission technology[J]. Transactions of China Electrotechnical Society, 2021, 36(8): 1547-1568.
[4] 朱逸凡. 碰撞式压电-电磁复合能量采集器研究[D]. 长春: 吉林大学, 2019.
[5] 黄文美, 夏志玉, 郭萍萍, 等. 变温条件下TbDyFe合金高频磁特性和损耗特性分析[J]. 电工技术学报, 2022, 37(1): 133-140.
Huang Wenmei, Xia Zhiyu, Guo Pingping, et al.Analysis of high frequency magnetic properties and loss characteristics of TbDyFe alloy under variable temperature[J]. Transactions of China Electrotechnical Society, 2022, 37(1): 133-140.
[6] 杨剑锋. 薄片式Galfenol能量收集器的设计与研究[D]. 杭州: 杭州电子科技大学, 2015.
[7] Deng Zhangxian, Dapino M J.Magnetic flux biasing of magnetostrictive sensors[J]. Smart Materials and Structures, 2017, 26(5): 055027.
[8] Viola A, Franzitta V, Cipriani G, et al.A magnetostrictive electric power generator for energy harvesting from traffic: design and experimental verification[J]. IEEE Transactions on Magnetics, 2015, 51(11): 1-4.
[9] Zucca M, Bottauscio O, Beatrice C, et al.A study on energy harvesting by amorphous strips[J]. IEEE Transactions on Magnetics, 2014, 50(11): 1-4.
[10] 孟爱华, 杨剑锋, 蒋孙权, 等. 柱棒式超磁致伸缩能量收集器的设计与实验[J]. 振动与冲击, 2017, 36(12): 175-180.
Meng Aihua, Yang Jianfeng, Jiang Sunquan, et al.Design and experiments of a column giant magnetostrictive energy harvester[J]. Journal of Vibration and Shock, 2017, 36(12): 175-180.
[11] 何忠波, 柏果, 郑佳伟, 等. 柱棒式超磁致伸缩振动能量收集装置建模与实验[J]. 农业机械学报, 2019, 50(8): 400-409.
He Zhongbo, Bai Guo, Zheng Jiawei, et al.Modeling and experiment of column-type giant magnetostrictive vibration energy harvesting device[J]. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(8): 400-409.
[12] Zhou Haomiao, Li Menghan, Li Xiaohong, et al.An analytical and explicit multi-field coupled nonlinear constitutive model for Terfenol-D giant magnetostrictive material[J]. Smart Materials and Structures, 2016, 25(8): 085036.
[13] Sathish Kumar R, Jayabal K.Micromechanically motivated constitutive model embedded in two-dimensional polygonal finite element framework for magnetostrictive actuators[J]. Journal of Applied Physics, 2019, 125(19): 194101.
[14] Ahmed U, Jeronen J, Zucca M, et al.Finite element analysis of magnetostrictive energy harvesting concept device utilizing thermodynamic magneto-mechanical model[J]. Journal of Magnetism and Magnetic Materials, 2019, 486: 165275.
[15] Pyo S, Roh Y.Structural design of an acoustic planar array transducer by using the equivalent circuit method[J]. Ultrasonics, 2020, 108: 106219.
[16] 李梦星, 张艳丽, 姜伟, 等. 机械应力下电工钢片磁滞与磁致伸缩回环滞后特性模拟[J]. 电工技术学报, 2022, 37(11): 2698-2706.
Li Mengxing, Zhang Yanli, Jiang Wei, et al.Simulation of hysteresis and magnetostrictive loop hysteretic characteristics of electrical steel sheets under mechanical stress[J]. Transactions of China Electrotechnical Society, 2022, 37(11): 2698-2706.
[17] 翁玲, 常振, 孙英, 等. 不同磁致伸缩材料的高频磁能损耗分析与实验研究[J]. 电工技术学报, 2020, 35(10): 2079-2087.
Weng Ling, Chang Zhen, Sun Ying, et al.Analysis and experimental study on high frequency magnetostrictive energy loss of different magnetostrictive materials[J]. Transactions of China Electrotechnical Society, 2020, 35(10): 2079-2087.
[18] Jin Ke, Kou Yong, Zheng Xiaojing.A nonlinear magneto-thermo-elastic coupled hysteretic constitutive model for magnetostrictive alloys[J]. Journal of Magnetism and Magnetic Materials, 2012, 324(12): 1954-1961.
[19] Clemente C S, Davino D.Modeling and characterization of a kinetic energy harvesting device based on galfenol[J]. Materials, 2019, 12(19): 3199.
[20] Meng Hao, Zhang Tianli, Jiang Chengbao.Cut-off frequency of magnetostrictive materials based on permeability spectra[J]. Journal of Magnetism and Magnetic Materials, 2012, 324(12): 1933-1937.
[21] 赵能桐, 高兵, 宁倩, 等. 考虑温度扰动的超磁致伸缩换能器电-磁-热-机耦合特性研究[J]. 中国电机工程学报, 2022, 42(16): 6116-6125, 6185.
Zhao Nengtong, Gao Bing, Ning Qian, et al.Electrical-magnetic-thermal-mechanical coupling characteristics of giant magnetostrictive transducer considering temperature disturbance[J]. Proceedings of the CSEE, 2022, 42(16): 6116-6125, 6185.
[22] Cai Wanchong, Feng Pingfa, Zhang Jianfu, et al.Effect of temperature on the performance of a giant magnetostrictive ultrasonic transducer[J]. Journal of Vibroengineering, 2016, 18(2): 1307-1318.