基于机器视觉的高压断路器机械特性测量方法研究

doi:10.19595/j.cnki.1000-6753.tces.L10106

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1369 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

High voltage circuit breaker (HVCB) is the key control and protection equipment in the power system. Accurate measurement of HVCB mechanical characteristics is a prerequisite for fault diagnosis and life prediction. Currently, several measurement methods using contact sensors have been proposed to extract the mechanical characteristics of HVCB. Contact sensors are mounted on the kinematic structure of the circuit breaker to extract the mechanical characteristics. However, the mounting imposes additional mass on the kinematic mechanism to interfere with its normal operation, and some mounting methods can cause damage to the HVCB. In response to the above problem, an improved method for tracking target trajectories based on machine vision with the optical flow is proposed in the presented paper. A high-speed camera is used to photograph the high-voltage circuit breaker operating mechanism, and then relevant information is extracted from the high-frame-rate video samples using relevant image processing algorithms.
Firstly, the crank arm of the HVCB operating mechanism is photographed by using a high-speed camera (4kHz and 1080*1080). Because of the great advantage of tracking individual target points and can effectively reduce computational effort, Lucas-Kanade (LK) optical flow method is introduced to track and monitor the target points in the video. However, the following problems are prone to occur in the data extraction process: (1) Since optical flow tracking is based on image grayscale changes, the target points in the image with weak grayscale changes cannot be tracked accurately. (2) The analysis of multiple video samples requires excessive reliance on the manual positioning of target corner points at the same location, which is prone to errors and increases the workload of the experimenters. To solve the above problem, the Shi-Tomasi corner detection algorithm is applied to filter out the strong corner points in the image that can be easily tracked, and find an optimal corner point from them for later optical flow tracking. The selection of the optimal corner point requires that its motion trajectory be relatively long, because the longer the trajectory the more information it contains. Then the Hough transform algorithm with the adaptive thresholding technique in OpenCV is used to automatically locate the target corner points. In OpenCV, CV2.adaptiveThreshold() function is applied, the maximum value of the threshold is set to 255, and the threshold type is set to CV2.THRESH_BINARY. This method does not require manual participation in the process of mechanical feature extraction, which can effectively avoid the error brought by manually. Finally, the proposed method is compared with the displacement curves measured by acceleration and displacement sensors, and the results indicate that the proposed method is completely effective.
The following conclusions can be drawn from the mechanical characteristics of HVCB extracted by the proposed method. (1) To solve the problem that some target points cannot be tracked, the Shi-Tomasi algorithm is applied to first filter the strong corner points that can be tracked. The results show that all the corner points derived from this method can be tracked accurately. (2) The use of the Hough transform algorithm can replace the manual positioning of target points, which can effectively reduce error and increase efficiency.

Key words： High voltage circuit breaker Machine vision Hough transform Lucas-Kanade optical flow method

PACS:

TM51

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liu Yakui
	Li Hongyun
	Lin Tianran
	Wang Fengchao

Cite this article:

Liu Yakui,Li Hongyun,Lin Tianran等. Research on mechanical characteristic measurement method of high voltage circuit breaker based on machine vision[J]. Transactions of China Electrotechnical Society, 0, (): 20235432-20235432.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L10106 OR https://dgjsxb.ces-transaction.com/EN/Y0/V/I/20235432

[1] Sun S, Wen Z, Du T, et al.Remaining Life Prediction of Conventional Low-Voltage Circuit Breaker Contact System Based on Effective Vibration Signal Segment Detection and MCCAE-LSTM[J]. IEEE Sensors Journal, 2021, 21(19): 21862-21871.
[2] Razi-Kazemi A A, Niayesh K. Condition monitoring of high voltage circuit breakers: Past to future[J]. IEEE Transactions on Power Delivery, 2021, 36(2): 740-750.
[3] 陈龙龙,魏晓光,焦重庆等.混合式高压直流断路器分断过程电磁瞬态建模和测试[J].电工技术学报,2021,36(24):5261-5271.
Chen L, Wei X, Jiao C, et al.Electromagnetic Transient Modeling and Test of Hybrid DC Circuit Breaker[J]. Transactions of China Electrotechnical Society, 2021,36(24):5261-5271.
[4] Lv Y, Cao X, Zhou Q, et al. Safety and security study for shore power system: State-of-the-art[C]. IEEE International Conference on Industrial Engineering and Engineering Management, 2020, 2020-December: 1306-1310.
[5] Yan J, Wang Y.High-voltage Circuit Breaker Intelligent Diagnosis Technology for Mechanical Faults under Power Internet of Things Con[C]. 7th IEEE International Conference on High Voltage Engineering and Application, ICHVE 2020 - Proceedings, 2020.
[6] Cao C, Liu M, Li B, et al.Mechanical fault diagnosis of high voltage circuit breakers utilizing VMD based on improved time segment energy entropy and a new hybrid classifier[J]. IEEE Access, 2020, 8: 177767-177781.
[7] 关永刚,杨元威,钟建英, 等.高压断路器机械故障诊断方法综述[J].高压电器,2018,54(07):10-19.
Guan Y, Yang Y, Zhong J, et al.Review on Mechanical Fault Diagnosis Methods for High-voltage Circuit Breakers[J]. High Voltage Apparatus, 2018, 54(7): 10-19.
[8] Zhang J, Wu Y, Xu Z, et al.Fault diagnosis of high voltage circuit breaker based on multi-sensor information fusion with training weights[J]. Measurement: Journal of the International Measurement Confederation, 2022, 192.
[9] Wan S, Chen L.Fault Diagnosis of High-Voltage Circuit Breakers Using Mechanism Action Time and Hybrid Classifier[J]. IEEE Access, 2019, 7: 85146-85157.
[10] Lin L, Wang B, Qi J, et al.A novel mechanical fault feature selection and diagnosis approach for high-voltage circuit breakers using features extracted without signal processing[J]. Sensors (Switzerland), 2019, 19(2).
[11] 杨秋玉, 王栋, 阮江军等. 基于振动信号的断路器机械零部件故障程度识别[J]. 电工技术学报, 2021, 36(13): 2880-2892.
Yang Q, Wang D, Ruan J, et al.Fault Severity Estimation Method for Mechanical Parts in Circuit Breakers Based on Vibration Analysis[J]. Transactions of China Electrotechnical Society, 2021, 36(13): 2880-2892.
[12] 马速良, 武建文, 袁洋等. 多振动信息下的高压断路器机械故障随机森林融合诊断方法[J]. 电工技术学报, 2020, 35(S2): 421-431.
Ma S, Wu J, Yuan Y, et al.Mechanical Fault Fusion Diagnosis of High Voltage Circuit Breaker Using Multi-Vibration Information Based on Random Forest[J]. Transactions of China Electrotechnical Society, 2020, 35(S2): 421-431.
[13] 豆龙江, 何玉灵, 万书亭等. 基于振动信号的高压断路器弹簧疲劳程度检测方法[J]. 电工技术学报, 2022, 37(24): 6420-6430.
Dou L, He Y, Wan S, et al.Detecting Method of High Voltage Circuit Breaker Spring Fatigue Based on Vibration Signal[J]. Transactions of China Electrotechnical Society, 2022, 37(24): 6420-6430.
[14] 赵书涛, 许文杰, 刘会兰等. 基于振动信号谱形状熵特征的高压断路器操动状态辨识方法[J]. 电工技术学报, 2022, 37(09): 2170-2178.
Zhao S, Xu W, Liu H, et al.Identification Method for Operation State of High Voltage Circuit Breakers Based on Spectral Shape Entropy Characteristics of Vibration Signals[J]. Transactions of China Electrotechnical Society, 2022, 37(09): 2170-2178.
[15] 刘会兰, 许文杰, 赵书涛等. 面向高压断路器故障分类的电流-振动信号类聚几何敏感特征优选方法[J]. 电工技术学报, 2023, 38(01): 26-36.
Liu H, Xu W, Zhao S, et al.Current-vibration for high-voltage circuit breaker fault classification Signal class clustering geometry sensitive feature preference method[J]. Transactions of China Electrotechnical Society, 2023, 38(01): 26-36.
[16] 杨秋玉, 阮江军, 张灿等. 基于定量递归分析的高压断路器机械缺陷辨识及应用[J]. 电工技术学报, 2020, 35(18): 3848-3859.
Yang Q, Ruan J, Zhang C, et al.Study and Application of Mechanical Defect Identification for High-Voltage Circuit Breakers Using Recurrence Quantification Analysis[J]. Transactions of China Electrotechnical Society, 2020, 35(18): 3848-3859.
[17] 仲林林,胡霞,刘柯妤.基于改进生成对抗网络的无人机电力杆塔巡检图像异常检测[J].电工技术学报,2022,37(09):2230-2240+2262.
Zhong L, Hu X, Liu K, et al. Power Tower Anomaly Detection from Unmanned Aerial Vehicles Inspection Images Based on Improved Generative Adversarial Network[J]. Transactions of China Electrotechnical Society, 2022,37(09):2230-2240+2262.
[18] 宋立业,刘帅,王凯等.基于改进EfficientDet的电网元件及缺陷识别方法[J].电工技术学报,2022,37(09):2241-2251.
Song L, Liu S, Wang K, et al.Identification Method of Power Grid Components and Defects Based on Improved EfficientDet[J]. Transactions of China Electrotechnical Society, 2022,37(09):2241-2251.
[19] 王立军,张拓,刘光伟,张佳灏.基于机器视觉技术的高压断路器机械特性诊断[J].高电压技术,2020,46(06):2148-2154.
Wang L, Zhang T, Liu G, et al.Diagnostics on Mechanical Characteristics of High Voltage Circuit Breaker Based on Machine Vision Technology[J]. High Voltage Engineering, 2020,46(06):2148-2154.
[20] 邓金秋,张国钢,耿英三,王建华.基于机器视觉的高压断路器速度特性测量方法研究[J].高压电器,2018,54(07):189-194+199.
Deng J, Zhang G, Geng Y, et al. Study on Measurement Method of Speed Characteristic of High Voltage Circuit Breaker Based on Machine Vision[J]. High Voltage Apparatus, 2018,54(07):189-194+199.
[21] Algethami N, Redfern S.Combining accumulated frame differencing and corner detection for motion detection[J]. Computer Graphics and Visual Computing, CGVC 2018, 2018: 7-14.
[22] Bansal M, Kumar M, Kumar M, et al.An efficient technique for object recognition using Shi-Tomasi corner detection algorithm[J]. Soft Computing, 2021, 25(6): 4423-4432.
[23] Changjie W, Hua N.Algorithm of remote sensing image matching based on corner-point[C]. RSIP 2017 - International Workshop on Remote Sensing with Intelligent Processing, Proceedings, 2017.
[24] Han S.Measuring displacement signal with an accelerometer[J]. Journal of Mechanical Science and Technology, 2010, 24(6): 1329-1335.