环保绝缘气体介电强度预测方法评估

doi:10.19595/j.cnki.1000-6753.tces.L10011

Abstract
Figure/Table
References (0)
Related Citation (5)

Download: PDF (647 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

SF₆ has a strong greenhouse effect, with a global warming potential (GWP) of 23 500. It needed to be alternated urgently. Gas dielectric strength prediction methods could quickly give the dielectric strength based on molecular parameters. The existing prediction methods are various. They use different parameters and discharge theories. The fitting samples they used were from different test conditions. That would lead to uniform dielectric strengths for the same gas in each perdition method. This paper evaluated the existing prediction methods to clarify the impact of the abovementioned factors on accuracy and reliability.
According to the parameters and model forms, five prediction methods with typical characteristics were selected. Method 1 used linear models of molecular polarization characteristics and ionization, adsorption energy, and other parameters. Method 2 added molecular geometric characteristics. Method 3 was based on the method 2 adding molecular symmetry factors, and the model is no linearized considering the discharge theory. Method 4 was a linear model using general interaction properties function (GIPF) parameters. Method 5 was the group contribution method. Nine frequently occurring gases (N₂, CO₂, N₂O, CF₄, SO₂F₂, c-C₄F₈, C₃F₈, C₅F₁₀O, and C₄F₇N) were selected to evaluate the prediction method. The relative dielectric strengths of nine gases relative to SF₆ were tested under the same conditions (50 Hz alternative current uniform electric field).
The results show that the prediction accuracy of each method was lower than the fitting results given in their papers. That was because the test conditions of the gases used in each prediction method were not uniform, and the relative dielectric strength of the gases used was inconsistent. Some gases’ dielectric strength had significant difference with the test data in this paper. The unification of gas dielectric strength based the test results in this paper could improve the accuracy of methods and the predication results of 5 methods could be consistent with their fitting results. In addition, with the enrichment of molecular parameters and the intervention of discharge theory, the prediction accuracy of methods 1 to 4 gradually increased. In addition, method 3, validated by the out-of-sample data, had high accuracy before and after the unification. Method 5, using the group contribution, also had the above properties. However, the groups method 5 could predict was limited. Hence, the method 5 could not predict all of 9 gases’ dielectric strength.
From the above evaluation results, it could be found that the gas data in the samples for fitting prediction models should be obtained under the same test conditions (electrode, electric field, voltage form, pressure, temperature, gap, et al). In addition, it is necessary to determine the applicable conditions and objects of the prediction method according to the sample data's test conditions and molecular characteristics. Towards the same sample, introducing the discharge theory, molecular geometric features, and new molecular parameters could help improve the accuracy of the prediction model. In addition, using out-of-sample data to validate the model and introducing the group contribution method could improve the inclusiveness of the prediction method for the sample data.

Key words： Eco-friendly insulation gases dielectric strength prediction quantitative structure-property relationships (QSPR) gas insulated transmission lines (GIL)

Received: 13 January 2023

PACS:

TM85

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhou Wenjun
	Qiu Rui
	Zheng Yu
	Pascal Brault

Cite this article:

Zhou Wenjun,Qiu Rui,Zheng Yu等. The Evaluation of Dielectric Strength Prediction Methods for Eco-friendly Insulation Gases[J]. Transactions of China Electrotechnical Society, 0, (): 142-142.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L10011 OR https://dgjsxb.ces-transaction.com/EN/Y0/V/I/142

[1] 王宝山, 余小娟, 侯华, 等. 六氟化硫绝缘替代气体的构效关系与分子设计技术现状及发展[J]. 电工技术学报, 2020, 35(1): 21-33.
Wang Baoshan, Yu Xiaojuan, Hou Hua, et al.Review on the developments of structure-activity relationship and molecular design of the replacement dielectric gases for SF₆[J]. Transactions of China Electrotechnical Society, 2020, 35(1): 21-33.
[2] 李亚龙, 张晓星, 卫卓, 等. 环保绝缘介质C₅F₁₀O混合气体体积分数比定量检测[J]. 电工技术学报, 2022, 37(8): 2117-2125.
Li Yalong, Zhang Xiaoxing, Wei Zhuo, et al.Quantitative detection on the concentration of eco-friendly insulating medium C₅F₁₀O gas mixture concentration[J]. Transactions of China Electrotechnical Society, 2022, 37(8): 2117-2125.
[3] 柯锟, 田双双, 张晓星, 等. 环保型介质HFO-1234ze(E)的分解路径及其化学反应速率分析[J]. 电工技术学报, 2021, 36(17): 3553-3563.
Ke Kun, Tian Shuangshuang, Zhang Xiaoxing, et al.Analysis of decomposition path and chemical reaction rate of environmentally friendly medium HFO-1234ze(E)[J]. Transactions of China Electrotechnical Society, 2021, 36(17): 3553-3563.
[4] 詹振宇, 阮浩鸥, 律方成, 等. 等离子体氟化改性环氧树脂及其在C₄F₇N/CO₂混合气体中电气性能研究[J]. 电工技术学报, 2020, 35(8): 1787-1798.
Zhan Zhenyu, Ruan Haoou, Lü Fangcheng, et al.Plasma fluorinated epoxy resin and its insulation properties in C₄F₇N/CO₂ mixed gas[J]. Transactions of China Electrotechnical Society, 2020, 35(8): 1787-1798.
[5] 唐念, 熊嘉宇, 周永言, 等. 环保气体HFO-1336mzz(E)及其混合气体的绝缘性能研究[J]. 电工技术学报, 2021, 36(13): 2871-2879.
Tang Nian, Xiong Jiayu, Zhou Yongyan, et al.Insulation Performance of Environmental-Friendly Gas HFO-1336mzz(E) and Its MixturesFull text replacement[J]. Transactions of China Electrotechnical Society, 2021, 36(13): 2871-2879.
[6] Hochberg B M, Sandberg E Y.Investigation of the disruptive strength of gases[J]. Journal of Technology Physics (USSR), 1942, 12(2-3): 65-75.
[7] Rabie M, Dahl D A, Donald S M A, et al. Predictors for gases of high electrical strength[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2013, 20(3): 856-863.
[8] Jiao Juntao, Xiao Dengming, Zhao Xiaoling, et al.Analysis of the molecules structure and vertical electron affinity of organic gas impact on electric strength[J]. Plasma Science and Technology, 2016, 18(5): 554-559.
[9] Zhang Chaohai, Shi Huixuan, Cheng Lin, et al.First principles based computational scheme for designing new SF₆ replacements[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2016, 23(5): 2572-2578.
[10] 陈庆国, 邱睿, 林林, 等. 基于密度泛函理论的SF₆潜在替代气体筛选[J]. 高电压技术, 2019, 45(4): 1026-1033.
Chen Qingguo, Qiu Rui, Lin Lin, et al.Selection of potential substitutes for SF₆ based on density functional theory[J]. High Voltage Engineering, 2019, 45(4): 1026-1033.
[11] 邱睿. 气体电介质物化参数的预测及SF₆潜在替代气体的筛选[D]. 哈尔滨: 哈尔滨理工大学, 2018.
[12] 侯华, 余小娟, 周文俊, 等. 绝缘气体介电强度的构效关系[J]. 高等学校化学学报, 2018, 39(11): 2477-2484.
Hou Hua, Yu Xiaojuan, Zhou Wenjun, et al.Theoretical investigations on the structure-activity relationship to the dielectric strength of the insulation gases[J]. Chemical Journal of Chinese Universities, 2018, 39(11): 2477-2484.
[13] 侯华, 王宝山. 六氟化硫替代气体绝缘强度的官能团加和理论方法[J]. 高等学校化学学报, 2021, 42(12): 3709-3715.
Hou Hua, Wang Baoshan.Group additivity theoretical model for the prediction of dielectric strengths of the alternative gases to SF₆[J]. Chemical Journal of Chinese Universities, 2021, 42(12): 3709-3715.
[14] You Tianpeng, Dong Xuzhu, Zhou Wenjun, et al.Research and analysis of insulating gas in unified test conditions[J]. ACS Omega, 2022, 7(11): 9221-9228.
[15] 李祎, 张晓星, 傅明利, 等. 环保绝缘气体C₄F₇N研究及应用进展Ⅰ: 绝缘及电、热分解特性[J]. 电工技术学报, 2021, 36(17): 3535-3552.
Li Yi, Zhang Xiaoxing, Fu Mingli, et al.Research and application progress of eco-friendly gas insulating medium C₄F₇N, partⅠ: insulation and electrical, thermal decomposition properties[J]. Transactions of China Electrotechnical Society, 2021, 36(17): 3535-3552.
[16] 李祎, 张晓星, 傅明利, 等. 环保绝缘气体C₄F₇N研究及应用进展Ⅱ:相容性、安全性及设备研发[J]. 电工技术学报, 2021, 36(21): 4567-4579.
Li Yi, Zhang Xiaoxing, Fu Mingli, et al.Research and application progress of eco-friendly gas insulating medium C₄F₇N, part Ⅱ: material compatibility, safety and equipment development[J]. Transactions of China Electrotechnical Society, 2021, 36(21): 4567-4579.
[17] Riley R D, Ensor J, Snell K I E, et al. Calculating the sample size required for developing a clinical prediction model[J]. BMJ (Clinical Research Ed), 2020, 368: m441.
[18] Christophorou L G, Olthoff J K, Green D S.Gases for electrical insulation arc interruption: possible present future alternatives to pure SF₆[R]. Washington: National Institute of Standards and Technology, 1997.
[19] Vijh A K.Relative electric strengths and polarizabilities of gaseous dielectrics[J]. Materials Chemistry and Physics, 1985, 12(3): 287-296.
[20] 刘关平, 杨帅, 张闹闹, 等. 基于电子定域化函数表面分析的气体介质绝缘强度预测[J]. 高电压技术, 2022, 48(6): 2208-2214.
Liu Guanping, Yang Shuai, Zhang Naonao, et al.Prediction on electrical strength of gaseous medium based on electron location function surface analysis[J]. High Voltage Engineering, 2022, 48(6): 2208-2214.
[21] 张闹闹, 杨帅, 刘关平, 等. 电子概率密度对气体绝缘强度预测的影响[J]. 高电压技术, 2022, 48(11): 4323-4331.
Zhang Naonao, Yang Shuai, Liu Guanping, et al.Influence of electron probability density on prediction for insulation strength[J]. High Voltage Engineering, 2022, 48(11): 4323-4331.